Exceptional video and simple to follow. Thank you for producing. One comment at 5:43 where you show the equipment required, the image for the 12 MB Stand Off Screws is not correct as it is the long screw with the plastic backing and not a washer. Just in case you did not know. All the best and thanks.

where is the one for the flat bench?

A very nice idea, but there is no third line for shaping to have more possibilities, the author makes 90-degree bends very sloppily (or rather, he doesn't do them at all, only in the 17th minute he succeeded if he used a set square to set these black plastic arms)

It would be good for them to show and go into more detail about what it's going to do. I can't imagen this doing any thing.

Do they sell just the acrylic plates? To switch them for different builds?

How does this compare to Primo Prep?

Olive oil is bad advice. Don’t follow this people!

Umm umm umm umm

You should explain what DI and RO liquid is.

My system reboot did not change color or foam like it did in the video. What's wrong with it

Goodness....too much talking. Just get to bending. The tool is self explanatory... especially when you show it in action.

Let's see what you think of my PrimoChill PETG 14mm. Look at my channel.

its like a crack pipe ...pog

Do I honestly have to buy a bit for *every single different size tubing* I’d like to use?

I was pretty sold on the EKWB FLT 80.....till I watched this video 😂❤️🇺🇸 personally I find building these loops *far easier* than deciding what parts to use, there’s so many amazing options 😉 my computer wasn’t built to hold this many open tabs👌

That would be SO handy!!

No explanation as to why it's needed anywhere. Just another sells gimmick.

Did all steps accordingly on a brand new system. Primo prep ended up gunking my system with green sludge and turning my entire loop green. Had to disassemble everything and scrub off the green sludge. Any thoughts on this?

So is the barrow one a knock off or you guys actually collaborated on this. Their stuff seems pretty high quality for the money but the shape and marking are exactly the same.

Where do I get a white wax pen!?

That stuff clogged up my system using it daily after 2.5 weeks and got progressively worse to the point where it totally clogged up every single nook and cranny of my water looped system within 6 months. It took me 3 full days to clean every single part of my system by hand. Meaning, I literally had to take apart and tooth brush each part and crevice. I also had to throughly flush my entire dual radiator system using concentrated vinegar (boy, did that stuff SMELL), scalding hot water and custom filter system setup using 2 x 5 micron filters, 4 times over until I was able to get 95% of the Micron Particles out of my setup. I told PrimoChill's owner this and even showed a video to them privately and I never received any kind of help or any kind of refund or compensation to get a different type of replacement fluid for free for all the problems that this VUE fluid caused. I will NEVER use VUE EVER AGAIN - and YOU SHOULD NOT EITHER!!! Don't believe anything you watch on this video. NOT one of their cleaning or prepping products worked. You've been warned.

so I cant use this with an aluminum radiator?

advance tech great

What is in this? Is it toxic?

So I got the PrimoChill CTR Phase II D5 Pump Head, but the part the sucks for me is my pump cover kit threads don't fit the CTR Phase II D5 Pump Head. I'm stuck with an ugly D5 bottom, which ruins the whole look. :(

You guys have pretty much guaranteed yourselves years of business by turning loop maintenance into an art form. Well done!

can you guys do a video of all your bottles next to each other so we can get a better representation of the products color? I cant decide between sterling silver and sky white.

i got reboot instead of sysprep for a new build by accident will i be fine?

so apparently I ordered the system reboot instead of sysprep and its a new build. Should I be okay or should I send back the right one?

Was here

You need to update your video for the RAD Clean product. There, it says to leave the rad sit for an hour

Water cooling is like growing bonzai. Requires extreme patience and dedication

they got guys waiting for questions AND answers.... bahaha

none of this video makes any sense like seriously this is PrimoChills youtube account?!?! like he himself didnt even use the product as its intended he was half ass using it they should pull this vidoe down and have someone actually put some effort into making the video instead of winging it.

So I planned on getting the white vue. Will LEDs that are inside of the reservoir light the fluid or will it be muffled because it’s an opaque fluid?

Are these still available?

Can i use this on Aluminum rad?

Please do tutorial on PrimoChill Water Cooling Cleaning Prep Kit - New System

This is the guy who puts the candy in every order.

This brand or mayhems? not sure which one to buy

Will this clean a Alphacool Radiator I’ve read there pretty dirty on the inside. One hour is the shortest time I’ve read for radiator cleaning fluid to finish.

alright lol... so i want the 80mm tube... what pump do i use if the d5 is too strong for 80mm + 120?

this made me angry the way he kept moving it around

So should you use Rad Clean to clean you rads before using system prep in a new loop?

I just got done creating my first loop. I used all primochill fittings and PETG tubing. Didn't have one leak! Super pumped. Now I'm running SysPrep through before I add some Vue. I really don't want to wait 48 hours, I want to finish this bad boy, but I know it will be worth it. So far I've been very happy with Primochill products. I'm glad I was able to buy the correct silicon insert from Primochill for my 1/2" OD 3/8" ID PETG tubing. It was a very tight fit but it NEEDS to be, just use soapy water for lubrication. For my first time bending, these bends came out really clean. I highly recommend it to anyone starting out. I have over 5 grand in this system and I'm really happy that I chose Primochill, so far, so good.

Hey uh, do you know where umm I could get, uh, this?

I have three rads to clean. I have extra ekwb plastic plugs. Can I use those in place of the 2 white plugs the cleaner came with?

I wonder if you can replace those acrylic tubes with glass tubes.

I am actually using this product right now. One thing in the video is that if you plug the other port on your radiator and try to fill from the other one water will not go in because there is no air opening in the radiator. It was a good leak test I guess. For the people watching, leave the other port open while filling in the solution, for a 360 rad it will take 250 ml or 1 cup of water to fill the whole thing. So you can clean 4 - 360 radiators with half of the bottle.