What are the measurements of the ramp? You got a like and a sub from me!
@paulhaggisman323812 күн бұрын
Omg that’s beautiful! You got plans? ❤❤❤
@craigpimlott20415 күн бұрын
Stock gearing is too high for the 21t motors .try an 11 t pinion but you’ll need a kit to do it ..13t and 11t pinions make a clod fly
@m694716 күн бұрын
If I convert drift 4wd to touring, is it just change tire? Or need to setting as well? Now after I changed the touring tire, when full acceleration then the car will spin.
@EdwardChew15 күн бұрын
yea change tire. set the geometry all to 0. The front has a one way diff so it will lock the rear wheel and free the front wheels when you apply brake. For expert racing, this setup is being used but not quite suitable for beginner.
@mr.on916 күн бұрын
Hello, may I have the size of the battery as I am don’t have the battery but I want to buy a Lipo battery that can fit inside that space Thanks
@matthewprice75616 күн бұрын
Just got one today for my birthday
@uppercase554917 күн бұрын
Can you have more than two or three of these on at one time?
@NBC_NCO20 күн бұрын
I would orient the gear boxes so they face the same direction to eliminate that problem. If the front and rear are different than order one or the other.
@cristophemorotti951025 күн бұрын
Hi, where found alloy propeller ?
@BasSchouten-w2s28 күн бұрын
Nice! Check out my c24 full metal
@Anglian-Rc28 күн бұрын
Looks awesome 🙌
@EdwardChew29 күн бұрын
WPL D14 👋😉 the Officially Licensed 1/10 Suzuki Carry from WPL RC. Get yours at 👉 www.wpl-rc.com #wplrc #wplofficialstore #d14 #suzukicarry #rccrawler #rcdrift #keittruck #4wd #trending
@EdwardChew29 күн бұрын
Can you bind surpass hobby radio to dumborc receiver? of course you can!
@beastgotunleashed950329 күн бұрын
Thank you for this video was wondering if my surpass was compatible with the dumbo receiver this video answered my question now gonna order more receivers for other projects
@wltoysxtremeАй бұрын
Edward when are you doing more videos on the new wpl d14 and mini? Been very keen to see you give opinion on it ❤❤❤❤❤❤❤❤❤
@EdwardChewАй бұрын
when i have the time 🙏🙏
@wltoysxtremeАй бұрын
@@EdwardChew brilliant thank you Edward ❤️
@thqpАй бұрын
I wish WPL would make a Unimog 404 Rc, There has never been an official Rc of that model of unimog :(
@OrcaBoat3Ай бұрын
I love your words: " Waste of time and money."
@933pilgrimАй бұрын
What winch best fit for B-24?
@Mike-kb3quАй бұрын
i would love to make a dually d64-1
@tigerclaw2714Ай бұрын
How did you get those?
@EdwardChewАй бұрын
here bro www.wpl-rc.com/products/realistic-accessories
@tigerclaw2714Ай бұрын
@@EdwardChew thank you
@edwardlove4300Ай бұрын
Dear WPL I recently received the new edition RES-V3. It looks a little different as the power inlet is clearly red, nice touch. My question is I would like to mount the board in the battery tray and battery in the bed of my old B1. Can I use some cushion under the board e.g. electric tape or foam and hot glue it in place? Thanks in advance. Edward
@EdwardChewАй бұрын
yeap the red connector is due to the feedback. 🙂 of course you can.
@edwardlove4300Ай бұрын
Thank you Mr. Chew for your speedy answer. 🥳
@foxjet77Ай бұрын
Just bought the new D14. I would definitely buy this 6x6 if WPL makes one! Thank you for your great creations Edward!!
@mr.on9Ай бұрын
No performance upgrade ? The next video
@EdwardChewАй бұрын
No. Made the upgraded, recorded but too long to edit 🙂
@mr.on9Ай бұрын
Can I do this without the white Bluetooth thing from shell?
@EdwardChewАй бұрын
yes if you can make your own battery
@jonmandelbaum5395Ай бұрын
What I want to know is how the body and chassis are attached because it’s not a rivet like it would be on other 1/64 models and I recently saw someone do a Gaslands themed body swap with a 1:55 Jada brand Chevy Silverado and I’d ask that guy but he’s hard to get in touch with
@EdwardChewАй бұрын
There are mounting pins from the body pushed into the holes on the chassis and glued. temporarily dropbox link to the pic www.dropbox.com/scl/fi/okobmrl1oub9b1azbcil9/20240712_145150.jpg?rlkey=9jvw5rpu62a6w50m6xasoqp1h&dl=0 Cheers
@jonmandelbaum5395Ай бұрын
@@EdwardChew cool. So in theory I could pry it apart then?
@EdwardChewАй бұрын
@@jonmandelbaum5395 yea it may be hard it may be easy. didnt try it on mine :D
@benjaminhalcomb8426Ай бұрын
I have a B16 that i have upgraded and customized. I recently upgraded to the Res-3 and upon the test run my 9g servo (3 wire) is not getting power. Everything else works, servo is not actuating.
@heavystarch100Ай бұрын
Thanks! I bought one, I wont even install it after this!!
@OldeSchoolRcUkАй бұрын
What does it mean if the lights flash slowely after binding motor is disabled but steering servo works
@EdwardChewАй бұрын
@@OldeSchoolRcUk low voltage cut
@OldeSchoolRcUkАй бұрын
@@EdwardChew yea thanks. It runs the motor in n 3s so I can drive it but sounds packed in completely. Reverse lights only blink twice even on 3s but at least will drive. Ordered another one. See how it goes. It’s like it stopped reading the voltages correctly. Watched a few of Your videos and tried a few things. So I put it done to a bad esc Thankyou. If the new one I have ordered works ok I’ll put them in my 3 hilux’s to. Thanks again.
@OldeSchoolRcUkАй бұрын
@@EdwardChew yea the 2s rail has a major issue. Replaced it now bud thanks. Still works on 3s though
@noah61363Ай бұрын
Hi bro. Can i put neon led ligbt connected to the yellow pin?
@rccrawlerextremeАй бұрын
Thks for sharing bro 😊
@carlostrejos5571Ай бұрын
Hi, do you recommend this one or the pro version?
@EdwardChewАй бұрын
depending on your budget. but even the brushed version is quite fast, surprisingly
@scannaunderscore1Ай бұрын
Need 2x brushed esc with 2x 10t motors
@fpvMazerolle26072 ай бұрын
Lmao it has drag brake you have to set it
@EdwardChew2 ай бұрын
LMAO the guy who doesnt know remote V1 and V2
@wltoysxtreme2 ай бұрын
Such a spot!!
@RCofIndia2 ай бұрын
Today in 2024 the 1:10 C74 is one of your hottest products. You guys have lived beyond your vision. Keep up your good work!
@MrPsychopathicManiac2 ай бұрын
Can u help me I want to add fog lights so on any of the Hazards The Lights That Turn On and Off is There Anyway To Make it Just Stay On When I Power it on
@RPguy12032 ай бұрын
Need help.. i having hard time to replace b24 front cover hinge. Possible to help out maybe making a video how to replace it.
@CustomRcGarage2 ай бұрын
👍
@Partizan522 ай бұрын
Good afternoon! I really liked the model! Is it possible to buy blueprints? I am from Russia and unfortunately the site does not accept my cards 😭
@seselapaz2 ай бұрын
What controller model is that one?
@vanmiguelpanem40092 ай бұрын
hey edward I just got one though it doesn’t bind at all, Do i need fully charged batteries? new battery on the transmitter? I just cant, need help…
@EdwardChew2 ай бұрын
yes fully charged battery, new battery on the transmitter. Rotate steering to bind. do not touch the throttle until it's bound