Would love to see if there was any difference on elrs 500 LoRa , f1000 isn't great in noisy environments

Was on the fence but this doesn't look good for multi protocol.

Such a shame it doesn't work with the ANT protocol. All my cars, trucks and boats are on my Flysky G7P.

Awesome. No way a normal person could figure this out.

I have watched this darn video 14 times before I finally you added a insert after channel1 My config has been driving me crazy! Thanks for the videos.

Off topic.......what portal axles are those under the 24th scale.

How did you get the traxxas to bind as I have 2 of the same receivers and the light goes green like it binded but it doesn't bind

Hello Jacob, would it be ok for you if I make a video which uses some of your setup/techniques you show here in this video? Of course I would mention you and put a link to this video in the show notes. Thanks Dude!

i assigned my t4 trim switch for a 2way switch like in your video. on the monitor the switch works fine but the trim still moves and beeps. is there a way to disable this trim movement and sound? thank you in advance

Thanks for sharing this info! Any chance you have Futaba receivers to test the latency of those?

Do you have any data on how much latency the 4-in-1 module adds vs the manufacturer transmitter?

Would be interesting to see what the Numbers look like with telemetry off

lets say we use switch (SC) as a toggle between the different drive modes, using an edge logical switch, .5 sec press is mirror steer, 1-2 sec press is rear steer, and 2-3 sec press is crab steer. my problem is that it doesn't "toggle" it,i have to set a duration, and i have to wait for said "duration" to pass before i can toggle another mode.... i wonder if i can use the sticky function... how would you go about it?

Thank you for all the effort you invested into this : Very useful and very thorough work! Well done!

and how do you get your transmitter to voice the drive modes? I have every audio setting on that i can find.

I did a similar setup on my MOA a fear years ago on OpenTX, with stick radio. Used left stick to ack similar to the pot you set. I must say that your setup is WAY simpler than mine, the logical switch on throttle is a great idea!

So I hvae figures out how to set the T4 as a channel for dig but the problem I run in to is that I can not adjust the travel of the servo like I can for the 3 pos SA switch? Am I missing something? The output menu has no effect like it does for steering and the other dig servo set to SA.

Did you ever find the answer for the team associated 1/28th rc ?

how can I set on of the dials to override them all modes or make a mode on the trim so I can manual use the rear?

THANK YOU, i would never do this on my own

Wow I was actually kind of anxious to setup my MOA cause it was a PITA on spektrum... But you made it super easy! Thank you sir!

It's funny I was thinking " mirror" also then it dawned on me... it just simply 4WS. Thanks a ton for making the video I watched your video and @donoldsneffe video on 4WS. Both were helpful ❤ I believe in real life use the SA switch would be superior for ease of use Down = FWS Middle = 4WS Up = crab And drivers choice of P2 or P1 for rear steering. I haven't figured out how to make the crab happen yet 😂 And right now I can rear steer with P2 but only if I'm in the SA middle position Any thoughts?

ArminRC is German, he produces videos in english and he has some good videos too. He and I have shared some ideas such as how to assign dual rate and expo to the pots.

Is your base controller the 4in1 version or the ELRS version? I'm trying to figure out what version of the radio I need for approximately 30 RC cars with varying receivers but also want long range with telemetry. I was looking at the ELRS version but not sure it does other receivers than RadioMaster. Thanks!

Right on man!! Such a good demonstration!

Great video. Thanks for the clear explanation. I used to run a Fly Sky G7p on my MOA. I didnt care for the radio much. Not very intuitive to set up. I was considering the NB4 as a replacement. It looks like this will do everything I need and save $100, so thanks for that lol.

Awesome video👍🏻

Great video. Easy to follow along. Thank you! I used this to set my Bully up. Only change I made was using the "SA" three-way switch for my dig & burn.

Thank you! Exactly what I needed for my TRX4. Liked & Subscribed! 👍

Any advice for using abs?

Thank you very much that all worked. Now do I have to set up a separate trim switch in order to trim the rear servo to straighten it out a bit?

❤parrallel your battery supply so both escs have the same voltage

I noticed that when you use T4 for dig it doesn't beep. Each time I use T4 trim for dig it beeps and voice says trim centered. I would like to turn that off.

Thank you for an awesome latency video 💯👍🙂 Do you know if there are any other ELRS receivers that can be used, that does not have the issue on channel 1 and 2?🙂

Hello Jacob, I ordered this transmitter for my MOA. Your video is a great help for the setup. Can you provide the backup file for this model? With copy & paste there is less chance that I will make an error... :-) Thanks for the video, W.Scherer (Cologne, Germany)

Hello. To be able to set up a failsafe for the Radiomaster R85C receiver, you need to rebind it with the Radiomaster MT12 in the mode: Type: FrSky X Subtype: D16 or D16 8Ch How to do this, see this video - kzbin.info/www/bejne/ZqCufKeepNeYgK8 (but do not forget to select the type and subtype that I wrote about above). For binding in D16 mode, the receiver will produce double flashes. Then the Failsafe item will appear, where you can select its mode, for example, Receiver (then when you long press the Bind button on the receiver, it will remember the position of the gas trigger and steering wheel, which was at the time of the long press of the Bind button).

Have you tried to connect to any new furitek python RFX 2in1 ?

This Video is awesome I have my Ax 24 all programmed up this way I do have 1 question though is it possible to add trim to the rear steering so you can trim it like the front wheels.

How did you get it to announce the steering modes ????

This is a really helpful video thanks. Only issue I’m having is T4 isn’t switching the Drive modes other than 0 to 1…. L10,11 & 12 switch, but DM stays at DM1 🤷🏼‍♂️. Other than that I think I’ve got the rest sorted

ok so next question for you, i have a k969 which is the same protocol(i believe) as the 989) why when i set it up like yours does it not connect to my MT12

Influencers were lying to you 13:10 it wouldn’t bind to my traxxas receivers either

ok so first of all GREAT video thank you for that, no on to my question. i have an axial ax24 xc1 crawler with the dsmr 2in1 receiver and it wont bind with the radiomaster mt12 using the R1F prootcol. the number on it is spmxse2425rx any help on thisa issue would be greatly appreciated. i have searcged this issue for about a week and this video has been the closest i have found to an answer. thanks

Should test Futaba and Sanwa, those Traxxas and Flysky is trash.

Wow this is a big help now that I have studied it for a week. It’s a lot to get used to but I am liking my M12 more and more.

Tried to repeat this but along with it controlling my dig servo, T4 still changes the trim. How do i remove it's trim function?

My only question is to get my remote to announce what mode it’s in like yours does , mirror , front , rear , crab I’d like my remote to say that

Thanks 4 the great video.. Can you please share the model YAML file?

A very informative video, wish I had viewed it earlier. I have bought the radio thinking it would be work with Kyosho KR331 receiver but i am not finding any video that says it did, If you have a a vehicle with that receiver do test and let me know... Or which other receiver i could use for quick response timing. Thanks in advance.

Hi man! Please test flysky noble nb4, It would be great!