2 жыл бұрын
2 жыл бұрын
Пікірлер
@alexscharf367 Күн бұрын
Very comprehensive video! I have had the MSP panels for a few years now and contemplating the shelf. I see this video is about 3 years old....are you still happy with the shelf?
@LoamRoamer Күн бұрын
Very. It always has gear on it. It was a great add.
@creece1 13 күн бұрын
Heard that you should replace the hub axle when replacing the hub bearings because they tend to wear at the points of contact with the bearings and break.
@AverageJoe97 15 күн бұрын
Is there any update on new projects? Have you used the new ULT pods?
@josemelendez6860 19 күн бұрын
So can i put a 2.5inch width on a 25mm width mtb rim?
@LoamRoamer 19 күн бұрын
Yes, it will run a little rounded, but work just fine!
@josemelendez6860 19 күн бұрын
@LoamRoamer thank you!
@alfredogarrido-zt5yi 21 күн бұрын
Hello sir, Have you put out the video yet? I wanna put a SRAM AXS XX1 T-Type transmission on my RM Altitude PP Rally Edition.
@LoamRoamer 20 күн бұрын
I have not, my apologies. I need to do the edit and post it.
@motocraneguy17 25 күн бұрын
Should I run longer travel? I’ve heard it sits deeper initially and I have 3 lengths of springs I can choose from.
@DustinYoung2whlogre 25 күн бұрын
You should run a bit more pressure. If you want to run more travel that is an option. I just added air pressure and got the feel I wanted.
@LoamRoamer 25 күн бұрын
I would run 15% or so more pressure. More travel, if it does not change geo enough to impact ride quality, is good but unnecessary.
@NateMTB64 Ай бұрын
Amen to this, its funny howany people i see spend so much for the exact same tech you just said.
@LoamRoamer Ай бұрын
Right!
@shaneycarter8803 Ай бұрын
I did exactly this to mine. Fully adjustable now. Fitted the bleed valves when fitting the full Fox mudguard 👍
@LoamRoamer Ай бұрын
Awesome!
@jacoblopez1432 Ай бұрын
Hi! Im from mexico and have a hartail that i use for allmountain and enduro light, stock bike have 26 mm internal, I wanna buy sun ringle duroc rims and have to option Sun ringle duroc 35 (with 31 internal) and duroc SD37 (with 32 internal) What do you recomend for my style of riding ? I live on a zond with very technical trail on the forest, northshore style ...
@LoamRoamer Ай бұрын
32 internals so if you run a 2.4 it is blocky or a 2.6 you get the benefit.
@jacoblopez1432 Ай бұрын
@LoamRoamer I use 2.4 hutchinson Wyrm For your comments, the Best election would be duroc 35 (internal 31) ? with my actual 26mm I see the tyre super round, like a balloon...
Ай бұрын
27mm - front 2.6 , rear 2.4 rigged marin muirwoods
@LoamRoamer Ай бұрын
2.6 will be rounded, it works if the goal is rolling as the tire profile is optimized for less resistance and not optimized for cornering. The rear def should roll, and corner pretty good.
@heijoleisten137 Ай бұрын
great thx
@jerryshoe7302 Ай бұрын
I just got a Transition Relay, (Fazua Ride 60). I want to do this. Are there any concerns with the tight bend on the cable where it comes from the controller and loops back under the ring before going in the hole? I wish there was a way to disassemble/reassemble the ring, placing the wire on the other side. Good video. Thanks.
@LoamRoamer Ай бұрын
Try and give it some loop, it is a thin bunch of wires for sure, but that is also a good reason to put it away.
@jerryshoe7302 Ай бұрын
Thanks.
@jacenolmsted6293 Ай бұрын
I’m currently running 29mm internal width rims paired with 2.4in Bontrager Gunnison tires. I’m dissatisfied with their roundish profile. Would a 2.5WT maxxis offer me a better profile? I’m thinking of getting some assegais or maybe dissectors
@callmedagoat3261 Ай бұрын
Thats well above avg
@LoamRoamer Ай бұрын
lol, love it!
@tapocamera-h7t 2 ай бұрын
Can I do this on a road bike wheel?
@LoamRoamer 2 ай бұрын
If it is a dt swiss exp hut, hell yes!
@MastaFRO1 2 ай бұрын
Is it just me or does aligning the bar with the markings of headtube angle make it look like it’s really rolled foward?
@DustinYoung2whlogre 2 ай бұрын
I htink it is just a cemera effect in the video, the bars are definitely not rolled forward.
@rafacycle 2 ай бұрын
In gravel bike 50mm front and 45mm rear - should I go for 25 internal or 28internal which is 75gr heavier for each rim ?
@DustinYoung2whlogre 2 ай бұрын
I would go 28 in the front and 25 in the rear. This is for traction versus rolling and spinning up. Many of my bikes have this variation for performance reasons.
@00blackfrc 2 ай бұрын
Just ordered using your link,good tip thank you.
@mattleonard5268 2 ай бұрын
Have you tried galfer? Have you tried mixed pads? What about the full metal copper pads?
@mattleonard5268 2 ай бұрын
I love my truckerco sintered metallic pads and I’ve been running them for a while but I’m tempted to try the red mtx
@treimar 3 ай бұрын
I think I'm gonna try 30mm with 2.00". I wanna know what it feels like.
@LoamRoamer 3 ай бұрын
Share what you find.
@425flex 3 ай бұрын
You think a round file would work just as safe as a drill bit?
@LoamRoamer 3 ай бұрын
yes
@Model6780 3 ай бұрын
I just got trp evo dh fitted on kevo and know have a wierd tapping noise I think in frame every time I compress suspension on my levo .changed all shock bushings no apart play in any linkage all bolts tight. Can't sus out what it is
@LoamRoamer 3 ай бұрын
brake host might be hitting the carbon during compression.
@Model6780 3 ай бұрын
@LoamRoamer sounds like it .its going to shop soon to remove hose and try eliminate as noise wasn't there before brakes were fitted also had fox upgrade my x2 at same time thought bushings. So replaced bushings. Must be cable thanks
@MTBUPGRADES 3 ай бұрын
Grab yourself a fox mud guard to smack on while you are doing the ports👌
@LoamRoamer 3 ай бұрын
For sure
@chingerzz123123123 3 ай бұрын
Great information on the topic. I unknowingly got my 240 hub built up to a 25mm IW rim.. the EX471... pretty upset about the 25mm IW because I've always ran 30mm and they've worked well. Right now I have a Conti Kryp 2.4 to the 2.4... What are your thoughts on a minion 2.4 on the 25mm IW... 2.3 minion?
@LoamRoamer 3 ай бұрын
It will round those tires and reduce the traction patch. While this may be fine in the rear it will make the front really feel the dead spot of a minion. If you drop to the 2.3 it will help. 30mm would be far more ideal. Even 28mm would be a big change using the tire widths you like. Sorry to hear you got a build that came with a narower rim width.
@hmudesign 3 ай бұрын
What about gravel 27.5 wheels? I have 50mm clearence front with a 29” wheel and 43mm on the rear with a 29” wheel. Probably 50mm front and 45mm with the 27.5 wheels. Any thoughts about the sweet spot for a internal rim with, tire combo? Thanks
@LoamRoamer 3 ай бұрын
25-28mm work amazing for this setup. I personally run 28mm
@eddier9593 3 ай бұрын
Hi, What am I supposed to be feeling exactly that’s soooo much better? I just got a 36 Performance and it feels freaking awesome! What more can the Grip2 damp do for my riding? My performance 36 ( to me ) is the best! You can adjust on the fly and actually feel the difference by simply setting to Firm, Med, and wide Open. Most people I know wouldn’t dare fiddle with their factory 36 bc they spend a ton of time setting it up and assume it feels good dialed without actually really knowing what perfect is supposed to feel like?
@LoamRoamer 3 ай бұрын
I agree with you in many ways. My point is why get Kashima just to get the ports. And if you want to have more adjustment a damper is all that does that, not the cost of appearance. You make great points on how simpler suspension worked really well for many.
@GregAspenson 4 ай бұрын
What’s the minimum inner rim width recommended for 27.5x2.8 tires?
@LoamRoamer 4 ай бұрын
30mm would be good as a minimum, 35mm would be a better width.
@loicplaysgames1666 4 ай бұрын
can you make a tutorial video because i have no idea what your talking about and i dont want to risk ruining my forks.
@LoamRoamer 4 ай бұрын
I will put this on the list!
@Shepski15 4 ай бұрын
Loving my Sight VLT C2! I run a Lyrik at 170mm on Noble TR-37s with Hydra hubs. One Up 35mm bar, Cromag stem, Funn Mamba one side clipless as well on Conti Krypyotal DH casing super soft front and soft rear. Its such a capable bike for shuttle DH laps but still absolutely rips punchy XC trails. My next upgrade is AXS. I did put XT 4 pot brakes on the front because they were needed. Great video on your wicked bike!
@kevk0221 4 ай бұрын
How is this setup working 1 year later? Thinking about doing same on my FAZUA bike. Thanks for the video!
@LoamRoamer 4 ай бұрын
Still working great!
@jmg4251 4 ай бұрын
Great comparison! Can you share your weight and the settings of the Ohlins? Tokens, spacers and adjustments?
@ccrognlie 4 ай бұрын
I just picked up a LT with the 5Dev, they are so bas a**
@Jeff13579 4 ай бұрын
Thanks, I am very light and I am sure this will help
@GokkunGuru 4 ай бұрын
That was very educational. This was a very good custom mod. Excellent job!
@SquidwardLWRC 5 ай бұрын
Where did you get the light fairing ? I cant seem to find it anywhere.
@LoamRoamer 5 ай бұрын
From up top Overland when I ordered the rack. I think they say it is the Baja Designs LP9 version
@RonnRider 5 ай бұрын
Where’s the video? I can’t find it🙏🏾
@paulemillevasseur7622 5 ай бұрын
What do you recommend for a big, heavy guy doing XC riding?? 2.35 front, 2.2 back.
@jackmcandle6955 5 ай бұрын
My ‘23 derailleur doesn’t have the screws so ill have to send it to sram.
@seamarsh3756 5 ай бұрын
man I was searching high and low for this! I knew there was a little sram thing but couldn't remember wtf it was! thanks
@LoamRoamer 5 ай бұрын
Park tools makes a great tool for this also, that has the threads and a cable attached.
@AnthonyMcCulley 5 ай бұрын
Is it just me or were a couple of steps skipped? Did you put oil in the air shaft (where the spacer / cap goes) and did you mention the extra 5ml of oil you need in air lower?
@corystreifel1696 5 ай бұрын
I am looking at snagging this bike this weekend (SIZE L). I am 6', 190 lbs. I just sold my 2021 CUBE Stereo HPC Race 140 LARGE. Loved the bike just bottomed it out a few times. Looking to upgrade to a bigger squish, better components. I enjoy doing it all. This would be my everyday bike here in Southern Alberta, trails, medium jumps and drops, downs and ups. Hard to decide. Feels like mixed reviews. Wish I could have kept my other bike to compare side by side. Any other tips?
@LoamRoamer 5 ай бұрын
I ride mine all the time, and it makes a tremendous one-bike solution. It is the bike I have owned the longest to date. If riding it on everything you describe, run it in high mode as a 29er. I think Mullet is only for the steeper and very tight riding on this bike. So many reviewers start out telling you how great a bike is because of their contract and then pivot (no pun intended) to a changed message when something new comes out. They are paid to say it is better; it is why I started this; I wouldn't say I like that about influencer behavior. A large will be great, and a suspension setup will be important. Don't run your compression fully open; damping is essential to all bikes. Follow their recommendations and then make small changes from there. I do big climb days with this bike, and while it is not an XC bike, it climbs well and is not a miserable experience. Then you point it in the direction of the party, and the confidence you gain is incredible. It is a playful bike that can smash big obstacles as well. Enjoy the bike, it is one of the better rides out there to own!
@giffmiff5920 5 ай бұрын
Thanks for this from the UK. I am just about to upgrade to Magura brakes and this is really helpful. Fingers crossed!
@richterfabro12 5 ай бұрын
May i know what bearing size and numbers for the rear please? Possible to get it not from industry 9 kit?
@LoamRoamer 5 ай бұрын
You should reach ut to thm with the issue, they do great warranties on their bearings. I do not know the bearing numbers off hand.
@timescueta57 5 ай бұрын
23mm inner and 2.20 tire? Is good for xc?
@LoamRoamer 5 ай бұрын
@@timescueta57 will work great
@timescueta57 5 ай бұрын
Is 24mm inner and 28mm outer good for xc riding on a hardtail?, i dont hit hard trails
@LoamRoamer 5 ай бұрын
It will work great for tires around 2.0-2.25. A wider tire will be rounded off.
@noam3d 5 ай бұрын
Do You know the numbers for the bearings and which brand would you recommend as the replacement?
@hajjihajar4169 6 ай бұрын
Thank you for posting a visual on these rare tech questions. Do you know if the issue is the same for the Vivid coil as well or is it just the vivid air?
@LoamRoamer 6 ай бұрын
similar issues as they adjust the same. It does work better than air. But the rebound is not fun ever,
@pintosurfboards 6 ай бұрын
Sweet!!!
@Leo-gt1bx 6 ай бұрын
How are19mm rims and 35mm tyres?