2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
4 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
6 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
Пікірлер
@Idasla Күн бұрын
Didn’t add my vocals. Hmmm just keeps using ai voices that aren’t me
@TKs3DPrints Күн бұрын
Mmmm i have noticed that some forms of music will effect the voice. are you using a hard and fast track.. i have had to do 6 tries sometimes before it has got my voice.. anything that may be punky or rock etc.. but 90% of the time i can get it to work.. though a clear recording is the best.. so always best to check the recording also before you use.. let me know if this helps.. and we will take it from there and see if i can help further after..
@7starblade 5 күн бұрын
how did you get a full song? i haven't even figured that out yet i keep getting cut off at 4:00 lmao
@TKs3DPrints 5 күн бұрын
ok when you have used all the 4 mins on a track you love and want to extend.. on the right hand side of that track you should find an option to extend.. this will set the song to be extended from the last part of the music.. so what i tend to do is listen to the track and find out where the lyrics stopped.. and then delete all the lyrics in the left column so only what has not been sung is there.. then i click the create button.. and it will give me 2 new endings.. if i like one then right click that part. on the right and select get full song.. and that will combine all them parts together creating the full song.
@7starblade 5 күн бұрын
@@TKs3DPrints woah that's awesome thanks!
@PreciseLifeHacks 13 күн бұрын
😮😮😮😳🤯
@Chesterton7 15 күн бұрын
Amazing. Thanks for the explanation and walk-thru!
@TKs3DPrints 15 күн бұрын
your welcome i hope it helps :) though i hope suno will add 4 uploads.. so we could use one for say my own voice.. another one for a female singer.. and could use the other 2 for using are own instruments to create a beat etc. at the moment its ever voice or music. but would be great to have 2.. and i think there could be more tweaking with the stems.. but its still early days and suno are always updating the software
@EerieQuest 20 күн бұрын
I personally think that the issue lies with the program itself. Ideally, we should be able to record our voices so the AI can learn from them and eventually simulate its own version of our voice. While this would be challenging we can require looking towards recording both spoken and sung words, as well as creating a vocal-only track it's a possibility that we can hope the AI will continuously improve at over time. It might be difficult, but hopefully, it will eventually happen for us..
@deadbeat-vc9kg 25 күн бұрын
Nice video. I've learned with Suno, it's all about the prompts, inputs and spacing. Learn your bracket phraseology and style terminology well. It also accepts Bpm inputs, Key inputs, vocal style inputs, FX and instrument styles, but you have to put it in a consistent structure and use punctuation or it will go off the rails and/or ignore your direction completely. Use commas to separate everything. Even if you put a Bpm input on one line and Key input on the line below, after you generate the song, if you hover your cursor over the style description and list of inputs you gave it, they will be connected together with and underline. This means that it's reading your inputs like a run on sentence and doesn't know where to break, pause or stop. You have to specify those things with your lyric box prompts, spacing and style box inputs. You can check out some of the songs I've put together so far on my KZbin channel or on Suno.com. The finished tracks on You Tube have had extra work done on them, so they are better quality and have some extra things in the tracks that aren't on the Suno.com version. I process and master all of the tracks I like through Acoustica Mixcraft before I publish them on my channel. I also have them up for sale in my online store. Links are in the descriptions. My hyperlinks aren't turned on yet by You Tube, so it's a copy and paste address bar situation right now. Anyway, good luck and remember, it's only work if you're not having fun doing it.
@Walterzuiderwijk 29 күн бұрын
Please help me I have uploaded my voice I've clicking on extend place the lyrics uploaded but not hearing my voice what's the matter?
@TKs3DPrints 29 күн бұрын
did you give it 5 seconds of clear space at the start.. was you saying the lyrics you wrote.. and it may be worth trying again.. it may not always work.. there are times i have to make a couple of recordings. try talking the words this may help a little i used the program this morning and was working ok.. are you using the webpage or the app ? let me know if you still need help
@TKs3DPrints 29 күн бұрын
is your sample the correct length ie sample is 20 seconds long is it set to 20 seconds..
@rickmunn6305 Ай бұрын
Thank you, this was great!
@TKs3DPrints Ай бұрын
your welcome i hope you have fun :)
@sing-alongmagic Ай бұрын
Thank you for the tutorial. I'm following your process; however, Suno is not using the voice recording. It gives me the option to "Extend" the track, but I can see the recording is not under the "Extend" feature. I have tried both options to record my voice, but alas, it's not working today. Do you have any tips to force it to use my recording?
@TKs3DPrints Ай бұрын
hello there.. i just went and checked and did a new song it is still working. though its not showing the picture anymore since there last update it should still show the time above the file. then click extend to make a new track. it is hit and miss.. you may just had a bad run.. may be worth recording some new vocals.. i have also tried vocals i have done for other songs in new songs.. but i do find now and then it may be worth recording the a new one.. did you check the recording before you uploaded it.. ?
@NyeonCat Ай бұрын
I tried to beatbox and upload it on Suno AI I want to make instrumental using that beatbox but it said failed to upload
@TKs3DPrints Ай бұрын
are you free account or full.. never had a problem makes sure that the sample is under 1 min long.. you may have to try a new sample.. let me know if this helps.. ?
@jordanmurphy2032 Ай бұрын
your asking it to genrate an instrumental from your vocals, thats the issue that you start having around 10 minutes in
@EerieQuest 20 күн бұрын
I agree with your point, but I also think that the issue lies with the program itself. Ideally, we should be able to record our voices so the AI can learn from them and eventually simulate its own version of our voice. While this would be challenging it gonna require looking at recording both spoken and sung words, as well as creating a vocal-only track. it's a possibility that we can hope the AI will continuously improve at over time. It might be difficult, but hopefully, it will eventually happen for us soon.
@hamavanti Ай бұрын
do you have premium account?
@TKs3DPrints Ай бұрын
yes.. i think it is well worth the money.. but you can now use this option with free accounts..
@joeshandle 2 ай бұрын
This was very helpful. Thank you.
@TKs3DPrints 2 ай бұрын
your welcome i hope you have fun :)
@rususapatriot 2 ай бұрын
Сразу понял по акценту, что кто-то из русскоязычных)
@TKs3DPrints 2 ай бұрын
thanks for comment. but i am welsh. :)
@scp_lost_archive Ай бұрын
где ты тут русского услышал, явно чел native with english
@TKs3DPrints Ай бұрын
@@scp_lost_archive think he may have seen some of the songs i made that are in my lists. but they are not Russian but Ukrainian
@gRosh08 2 ай бұрын
Cool. Thanks for sharing.
@TKs3DPrints 2 ай бұрын
your welcome.. :)
@mao2meow 2 ай бұрын
Wow. That's amazing. And kind of scary too. 🙁 Thanks for this, it was very informative.
@TKs3DPrints 2 ай бұрын
your welcome.. nah nothing scary.. just a new way of making music again it will never replace real music.. or live music or creative ideas.. as the software still has its limits...no maters how good it gets... :)
@k20df66 2 ай бұрын
You don't have to sing the whole thing because this model with extend sings based on everything before the selected time, e.g. 5 seconds. it only has database for 5 seconds.
@TKs3DPrints 2 ай бұрын
yes this is what i said in the video.. you only need to sing or talk the first couple verses.
@meta_quest_3 2 ай бұрын
UDIO vs Sonauto vs SUNO, which one can I use my voice, I mean he can create the music with my lyrics and my voice only or with my lyrics, my voice and my instrumental? But creating music with my voice is crucial for me, I don't want an artist's voice? I am looking so much for this website ? And the AI create the music with my voice only ! I try with my voice in SUNO, but I don't recognize it ! Is it because you use extend from 00:05 ? i try to understand and i am new with this websites ! too, i am french, help please
@TKs3DPrints 2 ай бұрын
well i use SUNO at the moment i record the first 3 parts of the song in my own voice. and the ai will work out the rest most times.. i have not trued Sonauto but i imagine you can do the same with Udio though i have not tested it.. SUNO will also base the music beat from your voice for the rhythm but it also depends on the style you choose..
@TKs3DPrints 2 ай бұрын
pour 00:05, ce que je fais, c'est laisser 5 secondes d'espace libre... et 5 secondes à la fin de l'enregistrement donc je sais que j'ai un espace vide... au début ou à la fin... mais avec la chanson .. il faut expérimenter. c'est-à-dire que votre échantillon dure 30 secondes... si vous démarrez la partie étendue à 30 secondes, la chanson peut manquer certaines des lignes de départ... encore une fois, c'est un hasard. car toutes les chansons ne sont pas sorties avec votre propre voix.
@TKs3DPrints 2 ай бұрын
if you need more help let me know..
@meta_quest_3 2 ай бұрын
@@TKs3DPrints ty very much, merci beaucoup, je comprends mieux :)
@noahofficialmusic 2 ай бұрын
thx u
@TKs3DPrints 2 ай бұрын
your welcome..
@TheSnowyOwl-zg2ck 2 ай бұрын
Nice, thanks. Are you sure you aren't a musician; Your voice is naturally great.
@TKs3DPrints 2 ай бұрын
thank you.. no i am not a musician.. i can just about play a few things.. and there is no way i could sing and play at the same time.. so hats off to anyone who can do just that simple thing..
@TKs3DPrints 3 ай бұрын
woops i waffle a bit. skip to 2: 30 mins in the video.. for how to.. :) and you may want to put [Intro] at the start of the song..
@jordanmurphy2032 Ай бұрын
good watch !
@TKs3DPrints Ай бұрын
@@jordanmurphy2032 thank you glad you enjoyed.. and hope it helps. :)
@Akromathia 5 ай бұрын
It would help to see the actual mini printed you know?
@francoedgar8646 Жыл бұрын
que escala es?
@TKs3DPrints Жыл бұрын
its about 1/35 scale or close to. was a while ago when i made the model.
@Linalisays Жыл бұрын
This was a fantastic and helpful video! Thank you!!
@TKs3DPrints Жыл бұрын
your welcome i am glad it helped :)
@Sylccc Жыл бұрын
It's weird, on my model the slider on the right side only goes up to 37mm and then it shows the whole rest of the model as one layer. it only goes to 750 layer but i know my printer can do way more than 750 layers. very weird
@TKs3DPrints Жыл бұрын
i have not tried the latest version of the photon workshop. i stopped using it a long time ago. i tend to use the free version of lychee for my printing. hmm check your layer settings incase your printing at 0.5 when you should be at 0.05 etc its as easy mistake to make. have you tried other models in the slicer. are you getting the same with them ?
@Sylccc Жыл бұрын
@@TKs3DPrints using lychee now as well. Works for me so thank you for the tip ^^
@TKs3DPrints Жыл бұрын
@@Sylccc your welcome. :)
@gabagool8 Жыл бұрын
Is this 1/35 scale ?
@TKs3DPrints Жыл бұрын
no but they can be scaled to any size you would like. you may have to split the model into a couple of parts depending on the size of your bed. :)
@tonysmith4801 2 жыл бұрын
How do you use teh edit function with supports? It is not the same as Chitubox, and I can't figure it out. thanks for this great video.
@TKs3DPrints 2 жыл бұрын
you know i just loaded up the version i have and for the life of me i cant remember how to sort them i know i can select the support then click edit. but nothing. no idea if i have just forgot i am sure you was able to move them all out of the way and do stuff. tbh i never use the program these days for supports. i tend to use the free version of lychee for my supports. and would only use the photon workshop for slicing the file. i have asked them many times to have coders that use 3d printers in there everyday life. but i feel like the software was written by people that have never used the machines. i would have a look at lychee for supports. most users use it or chitubox. though prusa can do some good supports also. sorry i could not help. but again i moved from the software as soon as there was a more reliable software for the machines.
@ronalddhs3726 2 жыл бұрын
I also got the original and I'm an early bird supporter on the mini; agree with you 100%: Great value for money.
@TKs3DPrints 2 жыл бұрын
yea same. even the original pop is an awesome bit of kit and the software updates just make them better and better. and i cant wait to see what they bring out next year. or the next. :)
@TKs3DPrints 2 жыл бұрын
sorry everyone about the low volume. youtube needs some better tools to edit videos that are posted to be able to boost the volume on posted videos.
@rorybaker5799 2 жыл бұрын
:)
@b.quentin7097 2 жыл бұрын
I am new to DLP printing and photon workshop. My printer came two days ago and now I am tinkering around with it. But the interface of the version of photon workshop that came on the USB Stick of my photon Ultra (V2.1.29 RC14) looks a lot different to that in your video. For instance there is noch "Slice Settings" or "Machine Settings" on the right side. There is a Model List instead and two buttons labeld "Settings" and "Slice". Under submenues of Settings I found most of the values that are shown on the right side in your video. Is there a way to get the view the way it is in your video? Thing is sometimes when I start the programm my settings seem to be reverted and so I have to check erverytime in the submenus.
@TKs3DPrints 2 жыл бұрын
hello there. yes i need to do a new video for the photon ultra as i know the photon workshop has updated. but i would suggest trying the beta software for the Lychee slicer. they also have the photon ultra in there printer lists. and from what i remember with the latest free version of lychee its very much the same as the lychee slicer video i did. the only change is that you need to select the photon ultra from the list in the anycubic range of printers. i hope this helps. and i will try and do an update Asap for the photon workshop for the ultra. :)
@b.quentin7097 2 жыл бұрын
@@TKs3DPrints Thanks for the quick answer. I already found the lychee slicer in another video. It looked pretty good. But can the free version do all the things photon workshop can? I would love to buy the pro Version, as I did with simplify 3d for my fdm printer, but the pricetag is way to high. I strongly dislike the abo modell because this is a hobby for me. After the first "new toy" time I think it will be more like one or two prints a month if anything. So after two years I would have paid 130Euro (and thats the yearly discount price) for maybe 24 prints. I realy don´t understand why they can´t just sell the Software as it is and give me the option to buy updates if I want them and when I want them. And yes I know I can switch the pro Abo on and off without downsides, but all that switching would be realy uncomfortable. Another question if you don´t mind. It may seem odd but my prints stick to my bed like concrete. I already have made a lot of ugly scratches to the bed, sigh. Can you give me any hints on what parameters that behavior might be changed? This minute I run a testprint on which I lowerd the "bottom exposure time" from 35.000 (was preset) to 20.000, which was a value I saw on a video from vog.
@TKs3DPrints 2 жыл бұрын
@@b.quentin7097 that and better its the only slicer that i use with the photons. though the prusa slicer is also ok to use. i prefer the lychee slicer and the free version is better than the photon workshop. as it has a great infill lattice that works perfectly. just remember to add a hole if you hollow large objects and place the hole close to the bed as it needs to printed first to allow air into the model to help reduce suction. exposure time will be down to the machine you are using. ie the ultra. or the mono. or the photons etc. also each machine exposure will vary depending on use etc. so its always best to calibrate each bottle of resin for your machine as you use it. uncle jessy has a few good kinds of exposure tests kzbin.info/www/bejne/Y6HFmml5oL-rnaM
@TKs3DPrints 2 жыл бұрын
i have also s3d for my fdm and at least with that software it was a one of payment. this is the way all software should be. i hate having to pay monthly to use software. and there is a lot of software i would love to own and use but they use that silly payment crap. but yes the the free version is great
@b.quentin7097 2 жыл бұрын
Ok I tried the free version. Besides from trying to mislead me to buy the software at every second klick it also prints all objects mirrored. Don´t know why that is. I noticed it because there is some writing on the side of my modell. Seems to be a common error on Lychee. Sadly none of the work arounds seem to do my modell any good. Same model works with photon workshop without issues. Now I have to do manual support all over again. Practice leads to mastery I guess. Maybe I try Lychee again later with figurines, where correct orientation is not such a big problem.
@rosascreativeworks5403 2 жыл бұрын
Wow! Definitely Wow!
@unusefull 2 жыл бұрын
My god ! Your build is fantastic ! But you sound soooooo tired !
@TKs3DPrints 2 жыл бұрын
i suffer with emphysema and only have use of about 3/4 of a lung. so easy out of breath. and i have to admit also it was like 6am when i finished the video also. i do try and put a bit of pop in the voice :)
@unusefull 2 жыл бұрын
@@TKs3DPrints arf, bad bad. Take care !
@TKs3DPrints 2 жыл бұрын
@@unusefull not to worry i try my best to keep a balance. :) and will also try and not finish a video at 7am :)
@captainpugwash7390 2 жыл бұрын
I think I need to give you a lesson in risk management...lol.
@TKs3DPrints 2 жыл бұрын
lol true. and it gets a lot worse when the half and home kicked in i died a huge amount then. lol
@captainpugwash7390 2 жыл бұрын
looks like I left you to it this time...mic is sounding good
@TKs3DPrints 2 жыл бұрын
ta captain. :)
@GreggAdventure 2 жыл бұрын
Thanks so much. I was missing, hitting the FILL button. Got me in the right direction
@TKs3DPrints 2 жыл бұрын
your welcome. glad you on the right path now :)
@TKs3DPrints 2 жыл бұрын
hmmm cant see comments. strange
@Cotsos88 2 жыл бұрын
Great video for a complete beginner, especially the support section . Easy and simple instructions.
@TKs3DPrints 2 жыл бұрын
thank you. glad it helped. :)
@captainpugwash7390 2 жыл бұрын
Great job TK going well.
@TKs3DPrints 2 жыл бұрын
ta hopefully i will have a better microphone for the next video. :)
@captainpugwash7390 2 жыл бұрын
Great job TK looking forward to watching the rest of the build as I was off doing my thing while you were hard at it.
@XainesWorld 2 жыл бұрын
I'm late to catching this :O, but nicely done man!
@TKs3DPrints 2 жыл бұрын
part 2 should be out soon. :)
@jimcleary1161 2 жыл бұрын
This was Awesome TK! Wish it was longer. After you finish the time lapse, could you do a video walkthrough? Its a fantastic build. When Beeble and friends visit I always want to see more. I liked and subscribed. Keep em coming Sir.
@TKs3DPrints 2 жыл бұрын
thanks for the subscribe. i have a load more i am working on. i wanted to keep them to about 10 mins long. that way its something fast peeps can watch during launch or something. and fingers crossed we will have a time-lapse of the community build starting next week fingers crossed.
@TKs3DPrints 2 жыл бұрын
and yes i will do a full walk though the build when its finished. and show the area. :)
@jimcleary1161 2 жыл бұрын
@@TKs3DPrints Cool. That Monday night stream is Awesome.
@MakerViking 2 жыл бұрын
Nice build! Valheim is a great game. :)
@TKs3DPrints 2 жыл бұрын
ta MakerViking i am loving the game. i also have builds with the valheim plus editor. but this was a challenge as it is just the base game no mods. :) expect more videos.
@Beeblebum 2 жыл бұрын
Very cool TK, and love that you added commentary as well! :)
@TKs3DPrints 2 жыл бұрын
ta beebs. fingers crossed my editing skills and stuff get better as i post more videos for it. :)
@jefflee8175 2 жыл бұрын
Thank you! Awesome instruction video
@TKs3DPrints 2 жыл бұрын
your welcome. this is why i make the videos to help new users :) and welcome to the world of resin printing. :)
@TheSixYardBox 3 жыл бұрын
Middle button to zoom in and out? What do you mean middle button? I can’t zoom in on this damn software. I’ve tried holding down mouse button and scrolling and I’ve tried ctl+ and nothing is working. Starting to really piss me off because the build plate is way too small for me to see what I’m doing properly. Chitubox is much easier to work with
@TKs3DPrints 3 жыл бұрын
with my mouse wheel if i press it down and scroll at the same time it will zoom the view in and out. but yes i have to agree its not the best software i myself now use the lychee slicer. but the video was created for them that are new and will use the photon workshop until they find a better slicer. give lychee a try also i found that chitubox gave me a lot of errors with some prints looking like they had skipped a layer or vertexes got messed up. not tried the more recent version of chitu as i got into using the free version of lychee. anyways hope pressing down and scrolling at the same time works for you.
@TheSixYardBox 3 жыл бұрын
@@TKs3DPrints I’ve got a laptop and not a mouse just a mouse pad so doing that won’t work but thanks for the help
@TKs3DPrints 3 жыл бұрын
@@TheSixYardBox ahh has the laptop got a dedicated 3d card. i am sure they have done a version for laptops that dont have a 3d card installed. same happens when users are just using the motherboard card. might be worth checking the website. sorry i cant help more.
@TheSixYardBox 3 жыл бұрын
@@TKs3DPrints ok I’ll have a look thanks a lot :)
@TKs3DPrints 3 жыл бұрын
@@TheSixYardBox your welcome. join the anycubic photon photon printers group on facebook. link is in the info. i am sure someone there will know. it might also be in the files section of the group. but check the search in the group for photon workshop. laptop. etc
@springzhou1038 3 жыл бұрын
Thank you Mark~
@TKs3DPrints 3 жыл бұрын
your welcome
@deadbirdkitsch 3 жыл бұрын
Thanks so much. I found this video from your comment on the official anycubic video and it's so much more helpful.
@TKs3DPrints 3 жыл бұрын
your welcome. glad it helped :)
@saltyscot078 3 жыл бұрын
I've just started with the whole 3d printing thing with the Anycubic photon along with matching washer/curer. Had many failures as never knew how to add supports. Thanks to this video. next try should be victorious. Thank you TK
@TKs3DPrints 3 жыл бұрын
let me know how things turned out. hope everything is working for you. :) if not i am sure we can get you printing.
@vken286 3 жыл бұрын
Thank you so much for this video, it's the perfect introduction and straight to the point! is there any directions for solid fill (no hallow pockets)? that would helps on some transparent small scale model prints
@TKs3DPrints 3 жыл бұрын
i think you just don't select hollow or add infill and it should print solid