This is not "How to wire " my search query

My 3 defiant lights flicker when on dim/dual brite but work fine full bright?

Doesn’t even turn on

My HZ kit's chime came with elastic/rubber bands around it that aren't shown in your video. Are they functional/needed or a forum of packaging that should be discarded? They aren't mentioned or shown at all in the instructions

This thing is absolutely worthless. If it’s not pointing DIRECTLY at the sun it won’t charge at all.

So I purchase this home security lights with the motion sensor I read some of these comments on here because I was having some of the same issues after doing a lot of researching it come out to be that for it to work right you need to use dimmable lights bulbs . I did this and it took me some time I had some tell me it's the electric wires the switch on the wall even taking the product back to get a refund back just to find out I was getting stuck with it so I did the research . Now it's working I did the settings to very sensitive and on the off position because I didn't wanted from dusk to dawn and the 3rd settings I put it on 5 minutes when something triggers it on and make sure you leave the switch in the house on. I hope this will help anyone else that is having some issues with their product. Thanks

I tried using 4 E12 led bulbs and they're all just constantly flashing...

The doorbell app for android didn't work on the new version of android We tried to contact with customer service But no one answer

Que hago cuando la mia no prende cuando hay movimiento:v

Wish i saw this before i bought one

Thanks for guide.. I see in the middle of taking out the push button the two wires were touching each other.. I don't know if the power was off or not.. is there on the the bells will be ringing continuously. that's a good video thank you

Is there a way to have the light always on?

Seeing which wires to hook up would of helped as my light has 2 reds 2 whites 1 black and 1 ground coming out of my unit and all are loose.

how to connect it on a phone???

Greetings H'Z'; A online manual stated only tungsten' bulbs. LEDs not compatible with this units system ? Thanks for your time, and spec' info !

Recently spotted locally at a bricks n'mortar retsilyfor a very attractive price point :-) Reviewing one of your online manuals for this product, For bulbs, there is no mention of LEDs. Just tungsten.... ! Only compatible type ? Thanks

There’s not sync button what do I do in this case.

cool for doorbells

Have had a couple of these for many years, but recently noticed that one was not turning on lights properly. It controls the coach lights on either side of our garage doors, and should come on when our son comes home from work at night and parks in the driveway. The testing procedure outlined in the manual says the sensor is OK. I suspect that what is happening is that the daylight sensor is being confused into believing that its not dark. The thing that has changed is that our son just bought a new car with brighter, LED headlghts. He parks with the car aimed toward the house with white siding, and the car is silver. So brighter lights with lots of reflective surfaces means more light bouncing around to confuse the sensor. The solution is probably to change how the sensor is aimed - trial and error!

Wish they had these instructions in the paper manual

Hello, is there a way to turn off or bypass the motion sensor? I'd like to use it with a Light Bulb Surveillance Camera and for that I need the power be always on.

Omg!! Thank you so much. I bought a Phillips on clearance without the owners manual, they do not have a frigging single video that I could find to pair it. You're my hero!!!

video is just as garbage as the paper instructions. Your technical writer needs training

I have a heath zenith 4131 wall mounted and can not get it adjusted so could you please hlp me with it

How do you change the chime sound?

Sensor's blinking red but no light even in test mode / normal lamp mode / dualbrite off.

Where did the two red wires on the transformer connect to before you started on the chime box wires?

They have no technical support at all, besides their toll free number, No tutorials besides very crude and badly made videos on youtube, this company is a failure, this failure of a company.

BUYER BEWARE: Will not connect to the Bluetooth or Wifi, you can connect to it directly as if it were an access point but still nothing, most of their products get scrapped after a few months and are considered unsupported paperweights. No support from Heath Zenith, Your money is down the drain and the product is now E-waste. It will blink ready to connect.... but there will be no way to use it. Because discontinued e-waste... even if you buy a brand new supported product... How long... How long will they support it, two weeks, a few months... a year? I tediously installed this doorbell, the door bell works manually, it recieves power, SO just like me... You could do everything correct but be left helpless because the product just won't work because they killed it off.

This is the second home in which kzbin.infoUgkx0jZ_lGlDVJhDnmagEU8gn47cmfPNlLQU we've replaced our "regular" doorbell with a Ring video doorbell and we really enjoy it. It is very easy to install and it works very well, with a clear picture through the app and good in-home use (we added the chime, which is also easy to install and doesn't require another thought to use).

My doorbell is broken and ai tried to replace it but Mine doesn’t have sync button. So what I have to buy?

It won’t ring when I press the button

If your light stays on for hours and doesn't turn off by the sensor, make sure that the Dualbrite switch is in the OFF position. My light started to stay on all night after I had an ac technician working outside. I found out that he turned that switch on.

Battery

Video is good. But door bell works when it wants. Is there a bettery?

useless.

Nice voice

What is the loose black wire coming from the sensor housing for? (loose = not connected to the red wire & other 2 black wires with factory installed wire nut)

Had mine for 8 months and it’s flickering bad now 🤷🏿‍♂️

It's been a year since I installed the dual brite sensor on this video and still doesn't work for me. All lights stay on without going off while there's no motion.

My light is supposed to be only two bulbs on until movement then all 4 on. All 4 lights stay on and calling the number on the directions has proven useless.

What if the wire colors don't match.

That is... how far away can you be from the sensor when it will trigger?

Does anyone know the "Max Range" of these motion sensors?🤨

Change on batteries

why my led flashes three times every five second and dosn't turn off? help

Interesting. Thanks for the upload though mine is not this bran, it could be the source of the problem so thanks again.

Easy installation thanks.

Lol unlike everyone else here, I have a problem that these will absolutely never turn off and if they do they come back on immediately. Why don't these things have an On/Off switch. Mine doesn't have a lamp selection. Garbo