That Allez is EPIC!

Ese método con los dedos esta hoy 2024 no cirve como referencia usar el medidor sw shimanol cn42 mae in Japón esta hecho x shimnao que mejor el park tool se copiaron a shimano ese no es muy fiable x sw desajusttaaa la ruedita

If you walk on beach sand then review your footprints, you can see how your feet tend to align naturally under load.

«Does require special tools». Special tools that are super expensive and hard to find anywhere that doesn’t require to allow for time in shipment. Really do wish you could just put that in the title, so I could find a better video for my need which is fixing it right away.

Better still use a fixed front roller stand or fit a mobility bar on the wall next to bike.

For road tires .. finish at the valve ! If not the tire won't seat on the center rim channel and you'll lose enough space to make it practically impossible to fit it on your rim. Then use soap water that will make both the fitting and once you put air into the seating process easier.

That, sir, was a splendid bit of tuition. Thanks.

An inspirational story and so pleased that despite the adversity of the situation there is such triumph in the end for all involved, thank you for sharing with the honesty and love I rarely see. I had a heart attack in Santa Ponsa, Mallorca which resulted in me having surgery, the cardiologist suggested an e bike and have loved it ever since. I now find myself gently using a normal road bike again, I now want a respray for it as well!! Thank you and wish you all the best.

Joke: that tyre was like an inner tube.

glad the music wasn't load and distracting.

Doesn't the new bike come with the steerer cut perfectly for the amount of spacers the bike comes with? So if I want to remove one spacer I cut off exactly the height off that spacer, don't I?

Can You run a Sram RED/integrated power meter 46-33 Crankset with this setup?

Exactly.. Bloody hell

Watched a few videos on installing cleats, and was like how can the top videos be so unhelpful for something so common, then thankfully found this one. Exactly what I was hoping for.

what gs on your bike here on the video sir ?

Could you make a video like this for tubeless ?

Thanks a lot for suggesting adjusting the b-tension screw! I recently got a new MTB and I'm still quite new when it comes to bike maintenance. I recently took the bike out for it's first good run and my gear shifting was horrible. Constantly skipping gears, which isn't great when you need them quickly. I looked up endless online how to's and everyone was saying to adjust the tension. What would happen is I would make the adjustment, and it would fix a couple of gears, but then the issue just kept jumping from one gear to another, and I was pulling my hair out as I couldn't understand why. Came across your video and followed your advice about the 6-9 mm gap on the b-tension screw. I then reset the tension again and only had to make minor adjustments to one of the gears, and the rest of them shift perfectly now. I was so close to throwing in the towel and doing a 40 mile round trip tomorrow to take it back to the shop to get them to fix, but now I'll get to go out on the bike instead. Thanks again!

Best setup video I've seen on the front derailleur anywhere. Very thorough. Thanks!

Great breakdown of correct way to re index your gears. Thanks

Locks aren't there to make your bike unstealable; they're there to slow down the thieves. My biggest grievance is when bike racks are poorly located; often out of sight around the back of buildings etc.

DIAMOND COATED PIPE CUTTER, Silent Working or cut bike frame & weld back if expensive, THEFT IS HARD TO STOP. 😮

Needs a close up to better understand.

thanks for clear way of explaining of how to install that "quick link".

I found the core is very important when riding roller. As you could see, his upper body barely moved, whatever he did. As a beginner rider I bought a set of rollers to ride indoor in winter, since it’s cheap😅. At first I had hard time staying on roller. My core was not ready probably. My upper body was dancing when paddling. I practiced over time now I could stay on rollers riding medium speed. However I still wobble when I pick up speed in higher gears. I use rollers when watching Netflix😂. I just ride rollers in steady medium speed to watch a couple of episodes for about 2hours.

Very clear, concise and to the point. Other videos on the subject a bit too granular. This one cut straight to the chase.

Beautifully explained! I will be back often to re-educate myself on this setup. Thank You!

This guy is forgetting to add that this is only going to work for a surprisingly short while. Disc brakes rub. Live with it or recognise that it is a silly technology.

Brilliant video after following your tutorial. I've just straightened my hanger due to my dog hitting the bike over thankyou.

BEST VIDEO on this subject anywhere. Thank you.

Thank you very much for your time, in this diy!Although at the end, when you're putting all together, i didn't get the extra that was above the stem. Was it the 5mm? Thanks

Do you have a howto to RE-seal and set a tire? I had to replace my valves as they got clogged. Now I can't get the tires re-sealed 😢😢

Brilliant, great to show the tougher road bike tyre during my flat without levers. This video worked. Thanks.

I have learned so much after watching your video. You must be a teacher. You make these detailed processes simple and easy to follow & understand. What mid range cleats would you recommend?😊

This is the best video I've seen on this problem. Thank you

Great video, the rotation direction indikator on the link help me 😊

Remote viewing lots of talking, better close up viewing, pity

Great video, however, there is a difference between wired tires and foldable tires. Also, mountain bike and fat tires and more difficult to work with.

The kops method is retarded because a large deviation in fore and aft can still make a too low saddle fulfil its criteria.

No details on times etc =:\

Cat is missing its tail :(

Thanks! Great video - I couldn't figure it how to do the final lock (I thought I was the Weak Link 😉 but the pedals proved I was wrong!

my top cap bolt just spins left or right and there's play smh bolt wont come out

100-200W is crazy given the size of the motor, very impressive.

Well i can confirm as a complete virgin to tubeless and sealant that so far mine was way easier than i thought. Thankfully i bought a tubeless ready set up on my canyon. What a great video and so simple to follow thanks

Bravo! I struggled for over an hour trying to install a quick link. Then you came along with your funny little tension reducing tool and your method of using pedal leverage to close the link. I watched and rewatched another video where the presenter authoritatively directed me to use the pliers designed to remove the quick link to install it. He even smoothly showed a video of such. Thank you for allowing me to rehab a very nice mountain bike to add to my stable.

this method does not work on my Giant TCR. after properly adjusting the stem cap. the stem bolts seem to tighten the fork, impeding proper movement, after using proper torque....

Nice explanation, very clear, I have always done it the old way and have become quite practiced at it but I agree its a bit of a faff, I am just about to replace my chain and cassette and I will do it this way next time thanks again

This is useless advice, this trick only works on a limited set of wheels/ tires. The only method i really see working is 1. Using an inner tire to seat the outer tire and then cut it out. 2. Use a big strab around the wheel so you need less air aka have more pressure to get the tire seated while doing the first pump

He said, “it’s at least an inch.” THUMBS-UP! I’m sick of having that metric crap shoved down our throats!

I’m not sure my legs will look better if I shave them. At this age the only one interested in my legs is Colonel Sanders.