Pretty well explained, but didn’t she put the yellow and red on the ‘inside’ lane … not outside. She says outside lane. So in this example, Yellow on outside rail of inside lane … red on inside rail of inside lane.
@FUNDAVIDE4U16 күн бұрын
thanks a million
@swdw97319 күн бұрын
Should have had a timer running so when you sped up the video we'd have an idea of the actual time it took once you finished.
@vithedesigner21 күн бұрын
You guys are the best
@Saturn2888Ай бұрын
How did you make the bridge? One second, you're putting flat track, the next minute, the whole bridge is built. This is missing from the manual, so I haven't yet done it with my set.
@mcburton68Ай бұрын
all it takes is LOTS of CASH or credit........and have fun
@NeuralX000Ай бұрын
I like the layout!
@TheAlternativeEnding.2 ай бұрын
Is there any way to unsync/unpair an already paired car with a particular controller?
@d303burrous2 ай бұрын
I don't understand how to adjust the two round dials in the bumper section to adjust for time in station and whatever else. Anybody know how to use them?
@d303burrous2 ай бұрын
Great video. Egad, I've been working for hours to set it up. I didn't know about the gray line on the diodes. Thanks, I needed that info.
@eefunhuang69582 ай бұрын
Thank you!🎉🎉
@ToJuRacing4 ай бұрын
Always good videos! Fixed a sound issue I was having. You folks are the BEST! thank you!
@last-known-photo85745 ай бұрын
I am able to bind the controllers no problem, but when I try to code the car to the controller as in your video and the written instructions nothing happens. Batteries are new and fully charged. Any suggestions?
@supercommando4406 ай бұрын
No guard rail? Geeezzz
@supercommando4406 ай бұрын
Are the red clips necessary? I’ve had a set for 15+ years. Never used the red clips. But the bigger question I have; can the “control/power” section be REPLACED with a standard analog power section, if I just want to run analog cars? (Yes I know I wont be able to lane change but will that lane change section need to be removed)?
@macgruff697 ай бұрын
This video is very helpful. thanks for posting it. I think you pretty much covered all the basics to get someone started.
@timd45247 ай бұрын
One of those little things I'm always having to look up.
@timd45247 ай бұрын
Oh dang. You've got a channel. Excellent.
@murphyhayes40017 ай бұрын
Hi I am new to the hobby. I just bought a Carrera digital track set it up and my calls were working perfectly and then all of a sudden I had two cars on different tracks operating from one digital controller and the other digital controller wasn’t controlling any car. Could you tell me how to correct this, and how could I tell a digital car from analog car. Thanks.
@ToJuRacing7 ай бұрын
Thank you, I will be doing this when I upgrade my track. Upgrade with new stuff from Carrera Slots! ;) Great video as always.
@ToJuRacing7 ай бұрын
Carrera Slots is the BEST! Best prices, great staff, good helpful videos! Shout out to Nadiya! Todd from ToJu Racing.
@earlofdoncaster50188 ай бұрын
Like an idiot I inserted my wireless dongle into the right slots, thinking that the left slots were for 'Towers'.
@trevorgwelch74128 ай бұрын
These guys really know their slot cars
@karlboyer959110 ай бұрын
Thanks
@knight543810 ай бұрын
Can someone help me to set it up ? Video is great , but need help to set it up .
@mikeszlashta676310 ай бұрын
Great information! Your website is terrific very easy to navigate and find products.
@stefanleonardo973410 ай бұрын
For realism, try removing the light from the cargo area.
@antonahorn865411 ай бұрын
Got the first two lights blinking. The reset doesnt seem to work here. Any ideas what to do?
@3dprintingboardgames66911 ай бұрын
Aaam, Aaam, Aaam...
@kenayre855411 ай бұрын
what set was that and the running feet ... thx for viewing my inquiry
@fathersondiecast6521 Жыл бұрын
I'm new to all this, is there another option to get a beefier power supply?
@timd45247 ай бұрын
The longer the track the lower the current can be in places on the track. This evens it out, and is also done in a fashion in the railroad hobby. Adding a beefier supply isn't needed and would probably be bad on the cars circuitry. It's just a matter of continuity.
@supercommando4406 ай бұрын
I’ve done it. I swapped out the 14volt power supply on my old analog setup using the 18volt evolution power supply, also using the red evolution controllers. It works. Never harmed anything. BUT the problem is the power becomes more unevenly distributed thru the track. Over powered at the power section and still underpowered at farther sections. I think this wire jump trick may still help even things out.
@3dprintingboardgames669 Жыл бұрын
Aaahm, aaahm, aaahm
@albertfernandez7337 Жыл бұрын
This does not work for my cars. I need help.
@slotvalleyracing Жыл бұрын
Great informative videos. Thank you!
@slotvalleyracing Жыл бұрын
Happy to found you so close!
@timd45247 ай бұрын
Lucky you. 👍
@timd45247 ай бұрын
Lucky you 👍. I enjoy their great service from a distance.
@All_RC_Fun Жыл бұрын
Appreciate these videos.
@jeffwachtman588 Жыл бұрын
It looks like you need about a 6’ x 4’ space for this?
@keithfilkins2043 Жыл бұрын
Thank you,like your videos and your business! You're video's are very helpful and your website is easy to navigate,and you have good inventory and fast shipping, which is very much appreciated
@terawattz Жыл бұрын
my brand new control unit lights do not even come on, have tried what you just did but still not working, and i cannot pair my wireless controllers,any help please
@ThinkerOnTheBus Жыл бұрын
Looks like a great addition. However, one issue concerning realism. If you are racing in a real race, and you're basically neck to neck, and it is coming down to the wire, but you are running incredibly low on fuel, you can't just glance over at your opponent to see how much fuel they have remaining, to determine the likelihood of them taking a pit stop before the checkered flag. So this accessory, while bringing slot car racing closer to reality, it does add one feature that moves the slot car experience slightly farther away from reality, and by doing so, it adds a new element to the competition that may not always be a factor, but could make a huge difference in those close races. "No, I wasn't looking at his screen, man." kzbin.infoQYwDJgPOSIE
@emersongraves5869 Жыл бұрын
Again, straight to the point and the how to do it is very informative, Thank you
@emersongraves5869 Жыл бұрын
I'm a newbie to the hobby, I've been watching 👀 utube video after video to get some basic information and understanding about what to buy and how to build. Your video I've just seen has been the most informative and easiest for any beginner like myself and others who want to be involved can truly cherish. Sincerely thank you for a wonderful job and I'm thankful I kept searching until I found you... I recommend everyone new to the slot car hobby to review this video and start your engine's from here.
@stacy9497 Жыл бұрын
It's easier to put the red clips in as you go. Just slide 2 of the red clips in one piece of track and slide another piece of track onto it until they are snug, then put your finger underneath and slide the red clip over until you hear it click.
@Godsbest7772 ай бұрын
👍👍👍👍
@alanrutkowski3332 Жыл бұрын
Thank you're so very much for this is it was very concise straightforward and perfectly executed. Now we'll see if it actually works and I know it will for the thrill
@GiulianoAlmeida Жыл бұрын
Hi! I Have a 15m Carrera Digital track. I Love! Question: Can I connect 4 wired controllers in the CU?
@timd45247 ай бұрын
Yep. Go for it. If you've got the original like me, you can get an extension for 2 more controllers. This is the newer power track and I know they have additional parts to add even more controllers. Six I think is the limit for controlled cars. Although it will run with added cars on auto. I think that can mess with the lap counter though. Call the store. Great staff.
@luisariza7404 Жыл бұрын
Thank you for the tip
@blakepartridge5200 Жыл бұрын
Might be a silly question but would this work with a starter transformer? (5003/110)
@patreh97489 ай бұрын
yes
@SPARK7311 Жыл бұрын
How do you set up 2 driver displays on one racetrack? Instructions or tutorial?
@HughesGarageSCA Жыл бұрын
Awesome!
@sneifert1968 Жыл бұрын
Love your store. I will continue to make all my purchases with you. Great customer service and speedy order processing.