Is it okay to use electric tape?

How is it that you disconnect the pins with a piece of tape and it works? Doesn’t the motherboard need those pins connected to send the signals?

Thank you for this video! I’d tried everything and thought it was broken and nearly spent a lot of money on a new TV. This fixed it and the display looks exactly as it did before like nothing even broke in the first place, thanks again!

It worked, at the first try with the tape, huge thanks man!

Thank you very much dude🙏 You saved my money. This was fixed by the first try. May god take care of you ❤️🙏

Instead of using the popular "tape" fix which takes some guesswork can't a simple JIG with a flat ribbon cable and DIP SWITCHES be used instead? This will save applying and then moving the tape until the bad traces are found.

Hi I have LG TV 42LB6500 THE sound is coming but no picture did I need mother bord or I tray to fix some like you

Thank you very much bro, it was fixed on the first try. God bless you.

Hi I changed power supply but half the screen is a little bit dim. My old power supply worked better than this new one. It showed more brightness on all tv but has a little bit of flickering. Why do you think the problem can be if half the tv is a little bit dim. Maybe motherboard? My other power supply has a dim spot but it was in the left side of the tv now I put a new power supply in and the dim part if on the right side. Please let me know if you can help. Thank you! 😊

Thank you bro

THANK YOU SO MUCH YOU SAVED ME 1000$ I HOPE YOU LIVE A PROSPEROUS AND LONG LIFE

Unbelievable!!! I'm not a person writing reviews bad or good but I have to write as this fellow is amazing. literally I just ordered a main board when I found this guy's video so i just checked it out and he was spot on right and with a piece of tape my TV was fixed. Mine and my girlfriend's jaw just dropped :) Well done mate!!! and a big thanks

Wolałbym wynieść na śmietnik niż dać forsę za taki "serwis". Po "naprawie" został porwany i pomięty reflektor, nie mówiąc o tym, że obudowa i wnętrze nawet nie zostały odkurzone, by kurz nie przylgnął do zdjętej matrycy.

Dostałem tv LG 32lf510b-zb z takim przypadkiem, kupiłem zwykłą taśmę led 5 metrów dobrałem tak że tv jak nowy😂, co prawda widac delikatnie te 4 paski na jednolitym obrazie ale najważniejsze że nie przekracza 24v (12v pasek polaczony szeregowo równolegle), w oryginale zasilane były 2 paski na 30v, 15v każda, a przy zmierzeniu bylo 31.5v, troszkę za wysoko.

I replaced both boards in my lg tv and it didn’t fix this problem. Your video saved it! Took a good 30 minutes messing around before I figured out where exactly to tape, my problem was the red connector. But we’re back up watching our tv!

I disconnected the power board from the main board, and it turns on and off rapidly with no picture, just the backlight. When they are both connected, it shows "Samsung Smart TV" and turns on and off more slowly. I have another main board from my other TV, and I tried it, and it does the same thing-turns on and off with no image, just the backlight, and it's rapid. I did try the main board on the TV that does work, and the screen stays on but with no picture, just the backlight. Any idea what it could be? My guess is it's the main board since it doesn't work on the other TV either.

Amazing video thank you!

Worked for my Lg Qned 75", i covered like 5 pins more or less 🎉

Can’t believe this worked. I had to move the tape a lot and almost gave up. Thank you!

4:29 the capacitor has this as text on it: "R 331K 2KV"

Worked like a dream. Tape in the exact same place too. Very handy since my other TV died last night.

Thank u sar

That was as clear as ditch water 😕

Thanks for this! I also fixed my TV with this. Any explanation on why this works? What do those pins do? Why does the display work without them? Is it a digital bus that works with lower width?

i did factory reset and its fixed the problem.

it works count 15 pins , thankyou.

Brilliant Thanks.

Good luck sir

This worked for me! I was able to fix my UN50NU6900 with this hack. It took some trial and error as you said, but the fix did help. Thanks so much!!

Thank you so much my friend, this worked! It took me several tries to find which pins to cover but it did fix the issue!

Just followed the video and replacing the led strips is a easy fix. Sadly I damaged the lcd panel when applying pressure to clip the bezel back in place. Take care when clipping back into place.

Otro mas con la chapuza de la cinta aislante??? Menuda puta mierda

Jest pokazane jak nie robić. Matryca jest tak delikatna że nie wolno jej podnosić w taki sposób, naprężenia powodują małe pęknięcia i jest do wyrzucenia. Tak jak zostanie położona tak rozbieramy od tyłu i składamy od tyłu do kupy, nie wolno podnosić matrycy tak jak na filmie.

Thank you so much... Really work this....

Merci merci beaucoup !! It works !

Hi, I am having a Philips 50PUS6804 and I have a crazy problem : 1. when I connect the elctricity it takes more than 1 min before the startbutton lights up 2. when I press demo he works perfect 3. Netflix is working 4. i cannot use Source button (black screen) and any input is working ??? any advice about this issue please ? the repairservice said they could not fix it ... :-(

IT WORKED FOR ME 🎉🎉🎉 THANKS

Thanks a lot!! You saved me from buying a new TV with this professional, but simple trick. Easy to repair!!

I fixed it using this method a few months ago and started again. I don't know if the problem is the board or something else. Could you please help me?

Great video and explained so well. Can't believe this trick worked. Mine was the other half of the screen but like he said, trial and error. Took me about 20 mins to find the sweet spot. 🙂

Is it possible to measure which pins are short-circuited?

Excellent video

I never comment a video on yt, but you saved my tv with this video. Thanks A LOT

Worked for me too Thanks so much another TV saved from landfill!

What are you using to put on as a signal blocker it's yello

I completed the fix on mine and everything turns back on but I’m not getting any picture. Any thoughts on what could be the issue?

Just fixed a LG (43UK6300BUB) TV this way! It ended up being the bottom ribbon cable and I covered about 12pins with some masking tape (looks like he had 15 or 16 pins covered in the video). I left 2 pins on the edge exposed as the picture quality was the most stable. If I covered the edge pins the picture lighting would fluctuate.. Thanks for the help!

I owe u big time mister! This worked for me

It works. Thank you so much👍👍

Another rescued TV! Not sure how you figured this out but it worked great. Would love to know why this works but happy enough that it did. Thanks!