WubDubz

Пікірлер

@MalcomMarinaro-f1h 2 ай бұрын

Little Knoll

@konichiva 3 ай бұрын

me using this vtx in my new build in 2024

@RuthNichols-r4o 3 ай бұрын

Rory Summit

@PerchEagle 3 ай бұрын

I'm getting 100 Celsius. Is it normal?

@dragonboy1116 5 ай бұрын

The water gun everone wants to make ... But cant...

@tor-WX 7 ай бұрын

i am not messing with a water gun that has recoil.

@SylvesterLesibanaSomo 7 ай бұрын

Recoil Control Is Unbelievable

@PropPhotographyAZ 7 ай бұрын

Great review, but you forgot to mention AKK MAKES COMPLETE TRASH AMD SHOULD BE AVOIDED AT ALL COSTS!!!

@Saudi955 Жыл бұрын

Still here?

@mitchwestrile Жыл бұрын

Songkran festival bouta go crazy

@feel65 Жыл бұрын

tutorial when

@feel65 Жыл бұрын

Nevermind, scrolled further down, sorry

@tonyfresh1 Жыл бұрын

I just got one of these last week dirt cheap. Not sure where to start when it comes to a transmitter and batteries. Could you point me in the right direction. This is my first fpv drone experience

@CrashNBurnRacing Жыл бұрын

This quad is set up to bind with a DSMX/DSM2 transmitter. Should be able to pickup a used Spektrum for cheap. Or buy a transmitter that can uses JR modules like a radio master and get a module for DSMX. This would give you more options in the future.

@tonyfresh1 Жыл бұрын

@@CrashNBurnRacing thank you so much for the reply I was looking at he radio master zorro

@NorgeSquad 2 жыл бұрын

I want to do this but idk if my VTX even support smart audio

@catherineharris4746 2 жыл бұрын

Outstanding!👏👏👏👍👍👍

@homebakedmemes394 2 жыл бұрын

Talk about recoil

@sandeepkulkarni6046 2 жыл бұрын

It's a M4 size screw.

@lorentacar 2 жыл бұрын

Hi!, doesn’t know if you’ll see my question... Does this able to connect an elrs or crossfire receiver?

@CrashNBurnRacing 2 жыл бұрын

I am not completely informed on how to setup CF or ELRS but I believe this board lacks the amount of UARTS to properly set them up. I could be wrong though.

@jonnymo4728 2 жыл бұрын

Why? Not getting it. Building it was IMHO the best part. I mean it looks awesome.

@dustinplee5067 2 жыл бұрын

Are they just for Micro drones and where do I plug The receiver into to it Or what is the thing that needs to be pluged into the receiver

@dronexfly 2 жыл бұрын

Hi WubDubz, congratulations on your TUTORIALS, could you help me, with my MATEKSYS MINI VTX. I would like to know how to unlock the POWER, why be LOCKED at 25mw. Do you have any advice for me ??? Thanks so much

@daveb2436 3 жыл бұрын

Still have mine. Hope you're doing well...Dave B

@น้องขวัญแพลี 3 жыл бұрын

หาซื้อได้ที่ไหนครับ

@devehsuarez435 3 жыл бұрын

What material did you print the camera bracket with

@devehsuarez435 3 жыл бұрын

Would the camera holder work with the runcam nano 2

@CrashNBurnRacing 3 жыл бұрын

Yes, I believe so.

@devehsuarez435 3 жыл бұрын

@@CrashNBurnRacing wow didn't expect you to reply so quick but man I love your videos. Thanks for this, I might go ahead and install the nano 2

@limodog779 3 жыл бұрын

My tinyhawk freestyle 2 vtx is broken can I use this one to replace it with?

@TomColontonio 3 жыл бұрын

Just got this.. video is terrible on any setting above 25mw Boooooooo

@jakelang4387 3 жыл бұрын

Why didn't you just buy better..lot of money but mine stalk should be better than it is, I think

@danosmith8126 3 жыл бұрын

I take that back still works :) only 4.90 per set

@ClickLikeAndSubscribe 3 жыл бұрын

Nice video. Now that we have Tinyhawk 2 available, I'd say skip the camera upgrade and the VTX and just put in a nice clover antenna to give your Tinyhawk 1 a whole new life. You are going to max out the built-in FrSky receiver before you'd need 200mw VTX. Also stock camera is not that bad and it much better protected that TH2.

@OLEHFPV 3 жыл бұрын

hey so i was having trouble setting up smart audio thanks to this awesome video I can now get into the menu with my controller but for some reason it will not let me change the band frequency of the power any idea how to fix this

@angrykid95 3 жыл бұрын

Is the camera PAL or NTSC?

@vahagnmelikyan2906 4 жыл бұрын

Do I need a flight controller for using camera and remote control and osd ( not for drone,different project)

@CrashNBurnRacing 4 жыл бұрын

You can use it with out a flight controller for video but you wont be able use remote control function.

@darkfitmc1754 4 жыл бұрын

excuse me? over 100$ transmitter has that big gaps tf i use 40$ flysky i6 and dosent have big gaps the fuck scam wast of money start with budget !!!!!!!1

@ze2004 4 жыл бұрын

my pad dont have 7 volts only 5 volts. how can i power it?

@timebert1132 4 жыл бұрын

Thanks so much for the video! I am looking to buy the Tinyhawk 1, or S (S only difference is to be able to use 2s LiPos?) as more than 25mW is not allowed here anyway. Can I just buy the camera and solder it in there or do I need to upgrade anything else with it ?

@RealKushrage 4 жыл бұрын

Sorry I don’t understood where I have to connect? To the 5v or the Led pad?

@CrashNBurnRacing 4 жыл бұрын

Borh will be needed. The LED pad is for the smart audio signal. The 4v pad is for power.

@RealKushrage 4 жыл бұрын

@@CrashNBurnRacing Okay thanks for your quick answer, so I connect the 5v from the vtx to the 5v port from the rgb pad and then the Smart Audio cable from my vtx to the led port from the rgb pad, right?

@CrashNBurnRacing 4 жыл бұрын

@@RealKushrage you got it.

@RealKushrage 4 жыл бұрын

Okay nice😂 thank you very much❤️ Sorry for asking, my english is not so good🙈😂

@Aarons14bugs 4 жыл бұрын

I cannot get smart audio to work at all with this vtx. Is there a special way to get it working with this one? I am running BF 4.2.2.

@craigmunday3707 4 жыл бұрын

Why is VTX TX connected to FC TX?

@CrashNBurnRacing 4 жыл бұрын

This is to use the smart audio function.

@manujk6802 Жыл бұрын

@CrashNBurnRacing "This is to use the smart audio function." finally i read that. you could say that in the video aswell becouse the "audio" pin on VTX may confuses some people like me :D

@TbstUSA 4 жыл бұрын

Pretty much cloned what you did but heeded your waning! It is awesome that you knew how to use the ckt board Co. Reading the options I was like Waaattt??? and that the site grabbed a zip, knew what to do with it and showed a preview! Amazing!

@GTXgb-gt8lz 4 жыл бұрын

thank you. very helpful

@gemster18 4 жыл бұрын

How do you do DVR with this little drone? Is there a way to record your flight?

@CrashNBurnRacing 4 жыл бұрын

This was recorded using the DVR in my Fatshark HD2s goggles.

@gemster18 4 жыл бұрын

Thank you for your review and mods, question, is it normal to have that much video breakup while your flying? seems like a lot?

@CrashNBurnRacing 4 жыл бұрын

The video in the goggles was much better, the DVR makes the video look worse than it is.

@Oxizee 4 жыл бұрын

oh ye, dont use protected batteries. X-lite dont like those.

@nacelylovo7089 4 жыл бұрын

This reminds me of blastoise

@douglasmitchell6160 4 жыл бұрын

What’s the point of that

@secretagb 4 жыл бұрын

Well for anyone else showing up here in 2020, the prices have changed quite dramatically. I just set up as he shows here and part 1 comes to $166.10! Part 2 is $123 and part 3 came to $123 as well. Not sure what Seeed is up to, but dang what a shame.

@imtall31 4 жыл бұрын

Did you have to flash the board to install turtle mode?

@CrashNBurnRacing 4 жыл бұрын

I did not, it is called flip over after crash in the modes tab.

@dominofpv1885 4 жыл бұрын

I have a question every time I change to raceband and I power cycle it or the minute I unplug it and plug it back in its still at A1

@CrashNBurnRacing 4 жыл бұрын

I know this was a big with an older version of betaflight.

@danosmith8126 4 жыл бұрын

dosn't work any more :(

@secretagb 4 жыл бұрын

Haha yeah I just looked and I'm seeing $166.10 for just one part, what the crap?? Talk about a price jump.

@drewsef85 4 жыл бұрын

Can this also be used for a mini gps for failsafe RTH? Great video, thanks!

@CrashNBurnRacing 4 жыл бұрын

GPS needs the rx and tx pads for a uart so I don't think it is possible.

Ең жақсы KZbin

Пікірлер