Hi, do you know the default password for this radio? I perform a Load default file and now the software ask for a password but I can’t find it anywhere

I'm surprised you didn't nail your hand to that wood after watching you open that box.

Bought mine in 1998. It now has a metal carb. I run 100:1 Amsoil. I jam it into so much snow, only the snout and handle is sticking out and it's good to go. I've replaced the paddles two years ago. On EOD, I pick it up and put on the top of the pile and tilt the unit. The paddles chew into it like a piranha. On the real wet stuff, cut your passes to half width.

Its better than milwaukee that doesnt even have a light

Repeat after me: W.E.R.A Not W.I.H.A

Thank you for review from Russia 😃

No link to cord?

Thanks for walking through the insides of this machine. Can you tell me why you say you don't worry about replacing the LED light? at kzbin.info/www/bejne/hKKng5uAiN-eg9k We have lots of people using our two machines and the LEDs only flicker very faintly, so I was considering replacing them.

Torx head screws are an American design from 1967 by Textron. They were designed to stop the camout issue that was designed into Phillips head screws. The patent has expired so anyone can manufacture "Torx" head screws or star drive, lets go with Torx.

Thanks man! Just bought this trimmer for $10 because it was missing the same parts. Parts cost ran me less than $50, so still not bad. Your video helped tremendously know what to order.

Loved your detailed video God bless you Brother!

Did you have to drill anything on the cover on 572xp to fit the outer dogs?

Great video. I wonder if i can open the lid for that boiler tank to see all the elements and heater

I had to comment on this. I finally found a person who thinks like me: If there's a will, there's a way. I love it!

As a builder who uses this every day, it's not a good framing gun. I own a metabo and a bostitch framing that are both older and they're way better. The makita is always having problems. Jambs, doesnt drive the nails as well and all the screws loosen, actually lost some.

Just bought some, VERY NICE!

How is it holding up? Good review.

Thank you for the video. Our brew switch stopped working, I'm going to use this video to troubleshoot this. This is a godsend! Thank you for posting

I know this is an old post and you haven't made any videos in a while, making it on YT is not an easy gig. You give good information....BUT you repeat too much. This 24 minute video could have been a third, about 8 minutes and had the same relevant information. If ever you do more in the future, edit the repetitiveness. Also, not just you, but others that do a lot of the 1 handed stuff in front of the camera, is frustrating to watch. Otherwise, you have subscribers, views and many videos, so you have done more than a multitude of people that try to make it on YT. I don't know the exact numbers but for every successful YTuber, many have failed. Good luck if you continue on.

Do you work with Silva Brothers?

Have you got any of the Ridgid drawers yet?

Thank you!! I actually just needed to know how to safely remove that top pan to access the switches.

This review is meh

Just picked this up from Home Depot (floor display) for $19. The clearance sticker said $95 down from $189. But it has been sitting on clearance since 10/23 and it’s now 07/24 I guess it’s been going down for the past 10 months. The store just didn’t keep up with the price tag, but thankfully they sold me the floor display because they were no more in stock at that store. Got home put a battery in it and thought maybe it was a dud! But then I realize you had to press the safety bar with the trigger at the same time. Worked extremely well, better than the Friskers manual has tremors work. Plus for $19 even if they didn’t work well I couldn’t complain.

Your dog is also heavy at work. He understood the mission.

Just put a shim/spacer in there. These things shouldn't have these problems. For the money this sht shouldn't be happening.

K!

Hi, I’m having difficulty testing whether the led is bad, or if the input is bad from thermostat. What voltage should I be getting at the wiring harness the led plugs into. I have a 120/240 model cwtf35

thanks for the vid, helped me decide to go get the set of this, i'm so happy I found your video. was looking for a system to organize my tools and your review is very detailed with the improvements and comparison to other brands. also this could make some nice hard boxes to protect expensive radio equipment in transportation, just add some foam or cushion material. 73 from KD2OVM

They look ridiculous! And whats the point of the little mini spike bolted onto the absurdly big one? What purpose does it serve? Shame I cant get the stock 572 outer felling dawg and this is what I get in a search looking for some.

LoL, I like when you said unplug the machine, I was a appliance tech for years, And I was getting shock all the time, : )

What do you do or did do for a living?

The classic B&D “dog dick in the dirt”

Nice comparison! I have an original 550xpg and love the heated handles in winter. 2017 build and I have not had any issues. But I run minimum 40:1 ethanol free 91 octane. My only dislike is the outboard clutch, do not forget to disengage the chain brake before removing the clutch cover! PITA when in the woods. Yes, an addict. My only husky and one of 7 that I own.

Great review! Thanks

Nice nail gun

I definitely want to get the new base box and drawer box but i use the original box as a seat and i wonder if the 2.0 will hold me or not.

Hi, am rebuilding one of these and I believe it’s leaking from the tank seal, so I have that on order, when taking it apart I took a pic of wires but it looks like the blanket Warmer had only one wire connected. Where does the other one go?

I’m just here for the coffee and donuts. Black with a teaspoon of sawdust pls.

I have this same exact model that I am currently trying to fix. Ive gone through hours of troublshoot. Got this for $50 at thrift store so dont know its history. To this point i replaced one brass water line that had a hole in it. And ive replaced the bug nut on top of the flow control on the back because the previous nut was cracked open (almost looked as though someone may have dropped it). After replacing these obvious things then i proceeded to troubleshoot the operation of the machine. Putting water into the top I wanted to make sure the tank was full so it could heat. Well during this process i put too much water in and water started pouring down to the bottom. I thought from previous forums i found that if i overflowed it then remainder would just come out theough the spray head. Well i was wrong which i later found out the silicone seal to the tank wasnt sealed properly. Currently it almost appears as though the top of the tank where it is bolted to the top looks warped a little bit. Not sure if it is supoosed to be flat or if its just warped. Hopefully not because i dont want to accidentally overfill it in the future and have it leak again. Ill address the leak if i can get the machine working. I have now gone through a series of testing continuity at alot of points to find my issue. I currently cant get the brewing process to start. The heating element comes on and heats the water to close to 200 degrees (i checked with a thermometer) but the water never boils up through yhe tube into the spray head through the filter tray. Was hoping maybe you had some advice for the leak spot and if you think that top could have been warped and if you know why i cant get brewing to start. Thank you

Have you checked out the West Coast saws felling dogs? Next level stuff!

Thanks for making this video, very helpful! On the Neiko security bit set, how did those work out for you? Thanks

You can get to bar adjuster on the 562xp ?

I just emailed to get a price

Mierda!!! Yo también tengo el mismo problema 👀soy adicto y fanático de las sierras motorizada 2t😂

How is the water level in the boiler determined? I have one that fills and keeps running and overflowing. There must be a sensor to trigger the fill valve?

hey. 3 days ago i buy 550xp. now i have question. i this normal? here i uploaded video on youtube. kzbin.infoJ4-r6W1gxOw?si=ZwhiueXadB3P4Swj

Thanks for review. I've got the Rigid system and been looking for ones with drawers . The ability to work out of drawers while stacked , makes them great in a customer's home , or apartment so your not bending over , with boxes all over the floor. Rigid finally came out with drawers but it waaay to heavy !! They needed a smaller unit for the middle of the set-up. . I can't make the jump to these , the Rigid like you said, the design and durability , and ease of stacking and unstacking is excellent. I think they still need an easily stackable system, thats easier to go up and down stairs . Honestly, if Rigid just comes out with a smaller drawer unit , I'm sticking with that.

Thanx been looking at this system going to replace what i have you may have sold me lol😊