Do you still have these on? Did you ever seal the headlights before installing them or no?
@stevemoua258016 күн бұрын
@RonDaG0at I still have them and they're still performing like the first day I had them. I never did a reseal on them either and for as much as I washed my car, never had a problem with condensation.
@RonDaG0at16 күн бұрын
@@stevemoua2580 my car stays outside and I’m assuming your car is garage kept right? I’m not sure if that’ll change the headlights overtime.
@stevemoua258014 күн бұрын
@RonDaG0at yeah mine is garage kept so that could also play a big factor too.
@razelllamanzares22 күн бұрын
Any drone during normal driving
@stevemoua258022 күн бұрын
@@razelllamanzares it's actually pretty good.
@PGK357Ай бұрын
CARB sticker 😂 I forgot about that California bullshit!
@goodnessorunor9465Ай бұрын
I tried it but it didn’t work 😢
@rx7fd3292 ай бұрын
just bought a new ect sensor, the cel still ON, what should i check?
@aboutme79922 ай бұрын
I have a GS250 2012 and the steering wheel squeaks. The dealer says that the clock spring needs to be replaced. Is the procedure similar to this IS350?
@stevemoua25802 ай бұрын
It should be fairly similar.
@shalenaross57793 ай бұрын
Did you drain the coolant beforehand or just change it really quick to avoid major fluid loss?
@stevemoua25803 ай бұрын
Because I already did a coolant flush and fill, I did it as fast as I could to avoid major fluid loss and just fill up coolant again but if it's been coolant that's been in there and I personally didn't know how long, I would've just drained it all.
@JuliaNiessen3 ай бұрын
Thank you, this was such a help!!
@saivyia3 ай бұрын
After the sand blast they looked pretty good. These hold up well?
@stevemoua25803 ай бұрын
Held up until I went and got it chemically dipped to remove all the paint off and now it's just bare.
@NANDO3IS3 ай бұрын
Hey bro. I got a question and maybe you can help. When i drive my car and increase the rpm. I noticed that sometimes or more than once my paddle shift doesnt go up when i need to change gears. I dont know if I am in a high or low rpm and thats why it wont shift up. But it only happens to my up shift only. The down shift never gives me an issue. Do you think i have the same issue as you? Or is this an existing problem with lexus cars.
@stevemoua25803 ай бұрын
To be honest, I'm not too sure. It could possibly be, wouldn't hurt to try and swap it out to see if it fixes the issue.
@Brendan-fu9wn3 ай бұрын
I got a 93 lx coupe 5 seed and it rips won’t lie. Fun little car.
@warrenaguarin90303 ай бұрын
Hey I saw you your struggling with those 2 springs bolts but never showed how you got it in I’m having the same problem right now let me know how you did it thank you
@stevemoua25803 ай бұрын
What I usually do is have someone apply pressure from the exhaust tip to push it towards the front of the engine so you could get the nuts threaded onto the bolt. If you don't have a second person which is a hit and miss for me then I usually just muscle it.
@warrenaguarin90303 ай бұрын
Okay and did your check engine light go away and was the car running better mpg wise ?
@stevemoua25803 ай бұрын
@warrenaguarin9030 cel did go away and as for mpg, not sure because it still averaged about the same. 300 plus on a full tank
@dtxglo4 ай бұрын
got some installed on my lexus, got a message on the dash saying “check headlight system” with red triangle light next to it, everything works tho, any idea how to fix this?
@stevemoua25804 ай бұрын
Never ran into that issue, I'd say check the 2is forums.
@shalenaross57794 ай бұрын
How is the cat holding up a year after install? Any lights or codes? Such a big price difference from the Honda genuine, but I'm into saving money for other parts. I've had a piece of wire holding my cat manifold in place so it doesnt rattle and make annoying sound. It's been that way since 2017, the first wire wrap rusted away and I wrapped it a second time but I'm trying to finally replace cat along with the entire exhaust pipe and muffler here soon for aesthetics and maybe it helps quiet down.
@stevemoua25804 ай бұрын
It held up until I sold the crv, never threw a code on me, though. I have read of others getting a code a month later after install. Guess I just got lucky with mine because it lasted until I sold it.
@JonathanEspinoza-fr7ff4 ай бұрын
This worked perfect! Thanks man
@user-kl7nh2vq3z4 ай бұрын
Thanks very hot man. I haven’t done mine but I will do it tomorrow. I appreciate it. Thank you very much.
@nocomment6504 ай бұрын
Thanks so much ! Easy and clear instructions and we changed it in a 'snap' !
@danielviveros81654 ай бұрын
Thank you so much for the video , I had this problem too. the sunroof was loose and it would thud every little bump ( I live in Cali so most of these roads are very imperfect) the gasket shrinks and that’s what causes it to be loose. And I know this a common problem with almost every Lexus around this year. Little tip for anyone trying to diy it. Buy silicone lubricant. It will make your job easier.
@FlipSideGarage5 ай бұрын
If you have a closed loop system. Why have the filter? So the back valve cover is still same without a catch can?
@stevemoua25805 ай бұрын
I actually ended up taking off the filter and plugging the top to close the system. Only showed it in the video because it came with it but yes, for those doing this application and you're routing it back to the engine, you'll need a closed system meaning no filter. Recently did an oil change and checked the oil catch can, did it's job. Very minimal oil collection but still there capturing oil and moisture.
@bvvbvv60105 ай бұрын
Nice wind noises 😅
@user-ek5fz6vx2x5 ай бұрын
215/75/15 ?
@orlandodizo50975 ай бұрын
Good tutor !
@kulwindersingh33335 ай бұрын
hlo
@camallen18955 ай бұрын
Is it still working today? I'm about to install one on my second gen pilot right now.
@stevemoua25805 ай бұрын
Yep, everything is still up and running like when I first installed it. No complaints. Plus their customer service is good too.
@BARBELLS-AND-BUDS6 ай бұрын
Can this cheap Cat work in California too?
@stevemoua25806 ай бұрын
I honestly don't know, never got the chance to try it out because I eventually sold the crv.
@sethware16656 ай бұрын
Legit. 10 billion thank you’s
@stevemoua25806 ай бұрын
Thanks glad it helped out, wished I had made an update video because when I went to do an oil change, I checked the oil catch can and it was doing its job capturing oil and water vapors. The liquid in the catch can was a chocolate caramel color, nothing crazy in volume, was still able to see the bottom of the oil catch can.
@FinanceDemystifiedd6 ай бұрын
That front bumper lit AF, what's the name?? Link to bumper please
@stevemoua25806 ай бұрын
It's the gs front bumper conversion and the people I bought off of was from Instagram, they didn't have a site to purchase from.
@j_ruiz10625 ай бұрын
@@stevemoua2580was it JDM Culture?
@joshuasmith25046 ай бұрын
How did it hold up?
@stevemoua25806 ай бұрын
It held up pretty good, up until I decided to take them to go get chemically dipped to remove everything and start fresh. My best advice when doing this, take your time on the clear coat and be greedy with it, clear will help protect and hold the base color altogether.
@LoveLiveLifeistooshort6 ай бұрын
Where can I get the dame one you're using? Help me
@stevemoua25806 ай бұрын
Visit svcmcontroller's website Google it and it should be one of the first ones to pop up 💪
@Dylan_Cummings7 ай бұрын
I went to replace my rear wiper on my pilot and realized It's not like other wiper blades where can I get this specific one ? Only from Honda?
@stevemoua25807 ай бұрын
Had the same issue that's why I went oem but instead of going to honda I just went online and ordered it off ebay.
@Dylan_Cummings7 ай бұрын
@stevemoua2580 yeah i been trying to find one and its impossible without ordering online. I found one on Amazon should be here tomorrow. Thanks brotha
@ShelbyXloveXxX7 ай бұрын
Do you like the Bosch brand for the back wiper? The rubber is coming off on my OEM rear wiper and I am wanting to replace it
@stevemoua25807 ай бұрын
It's honestly worked well for me especially since the weather conditions have changed and been raining a lot lately, no complaints. Had to change mine as well due to the same problem.
@projects-reviews7 ай бұрын
Nice lights
@ismaeelmunir41377 ай бұрын
🎉🎉
@topg19647 ай бұрын
Looks good but that front bumper is terrible lol
@stevemoua25807 ай бұрын
Trying out different fronts 😅
@topg19647 ай бұрын
@@stevemoua2580 I feel like the 4IS convention would be perfect, the bumper it has now looks like it’s melting off
@kg8884 ай бұрын
@@topg1964 The 4is bumper doesn't flow well if you look at the side of the car. BUT if you have a flymotor1 side panel with vent it will.
@dwzook7 ай бұрын
How difficult was it to adjust the beams up? Seems like you can't reach that adjuster when the headlights are installed.
@stevemoua25807 ай бұрын
It's a pain honestly, left the bumper off for ease of access to the headlights. Literally pull the headlights off, adjust, drive around, and repeat until desired aim is achieved.
@markitoss7 ай бұрын
Thank you! This worked
@michaelwright16028 ай бұрын
I just purchased a 2013 Honda Pilot EX-L, 114,000 miles... The PCV valve I removed, in two pieces, looked to be the one installed at the factory. Replace your PCV valves folks. These are a vital part of a proper functioning motor, effecting everything from the life of the motor to fuel economy. Since changing mine, running some injector cleaner through the gas tank, cleaning the throttle body and EGR valve, I have already gained 2 mpg in fuel economy. the PCV valve cost me $35, and a bit of elbow grease.
@rdb53838 ай бұрын
What’s the name of that hose? Coz I can’t find it online
@stevemoua25808 ай бұрын
Fuel vapor hose, part number 23827-31100
@dirtomega8 ай бұрын
I have a set of those coming in soon. Have you had any problems with the high beams flicking during the day while the DRL’s are on?
@stevemoua25808 ай бұрын
I have honestly had zero issues with them. Recommended in my book.
@dirtomega8 ай бұрын
@@stevemoua2580 Good to know! Thanks man!!! Keep the great content coming!!
@jasonhoy42588 ай бұрын
Nice
@michaelwright16028 ай бұрын
Looks just like the Start-X I just installed in my Pilot, took less than a half an hour and works great.
@mellomob39148 ай бұрын
👁👁 frickin beautiful 😍 🤩
@pre2wavy9058 ай бұрын
Hidden v8 motor lol
@_MIKIMOTO_8 ай бұрын
Too riced out 🍚
@stevemoua25808 ай бұрын
Rice for days
@_MIKIMOTO_8 ай бұрын
@@stevemoua2580 fr fr 😂💀
@stevemoua25808 ай бұрын
@_MIKIMOTO_ fried rice though. Got little bit of everything.
@_MIKIMOTO_8 ай бұрын
@@stevemoua2580 fried rice ain’t bad add little soy sauce and you gucci
@IIdankII7 ай бұрын
@@stevemoua2580 3GR swap it and put a blower on it it will be a real monster.
@jayy-sims9 ай бұрын
Are they plug & play
@stevemoua25809 ай бұрын
Yes, they plug into your oem harness.
@ekingvang30439 ай бұрын
Did a smog check on 2015 Honda pilot and fail. The failure result was Fuel Metering System, Crankcase Emissions Control n other emissions related components systems. Help please
@stevemoua25809 ай бұрын
Are there any check engine lights? Any codes ?
@ekingvang30438 ай бұрын
No engine light on just took it for smog check
@budderswag9 ай бұрын
Nit a fan of the duraflex msr kit looks cheao and does.t fit the body lines at all maybe molded woukd look better also why not psy the extra $100 for the side vent piece the gap without itnmpooks wierd lol
@stevemoua25809 ай бұрын
Because I'm poor
@OCCX119 ай бұрын
Great vid. Thanks bro.
@41Vega9 ай бұрын
One the hardest things to find for my car…I’ve had Jettas all my life and finally did the Audi switch but i’ll admit the marketplace for Audi things isn’t there like VW. Plus it’s wayyyy more money for basically the same bs.