Brian on Wheels

Пікірлер

@naikkelas7495 Ай бұрын

What japan made euc there?

@Vince4343 2 ай бұрын

👍👍👍

@Vince4343 2 ай бұрын

so helpful !! thank you Brian !! 👍

@iiilisan 3 ай бұрын

love you buddy

@richsam287 3 ай бұрын

I would recommend disconnecting battery before gaining access to controller compartment. Just dropping a screw on your controller could make fireworks.

@budikon3911 5 ай бұрын

Hello I have a question, you said not to mess with calibration on the euc but I accidentally did it and now my euc is tilting forward each turn I do. Do you know a way to fix it or I am stuck with it 😅

@brianonwheels 5 ай бұрын

you'll need to recalerbrate it. go back to the calibration 0, and press it once and it would no longer balance, so you can tilt the EUC around to what you consider leveled and then press the button again and it'll say something like "calibration 1, 2 " and then the wheel will start balancing again. Just do this until you feel satified with the calibration

@hi84690 5 ай бұрын

How do you like like those wheel atm it seem to the be tubeless one

@laurentvergeynst7841 5 ай бұрын

I bought very recently a lynx but I can't go faster than 25km/h. I got the tiltback from 25km/h. Can you help me on that.

@brianonwheels 5 ай бұрын

Go to the os tilt back and set the percentage to 70% or higher. Also set the speed till tilt back to a higher number. This video shows me going over all these settings

@cwwan 6 ай бұрын

What happen if you got caught by police?

@franciskingrn 6 ай бұрын

Mine has Er 0bt what does that mean?

@kilobak2297 6 ай бұрын

AFAIK: 1. the voltage setting allows you to correct the voltage reported by wheel. E.g. if you measure with your voltometer and find out that your euc is reporting 0.1V more then you can adjust it here. 2. The calibration is useful if for some reason your wheel isn’t flat horizontally when standing still and turned in different directions. Then you enter the calibration, level changes to 1, you place the wheel to “stand perfectly straight”, enter again, level changes to 2 and after a moment the calibration is done.

@RonnieRides 6 ай бұрын

Don't even need to measure with a multimeter, can just check the BMS reported value and then match the display setting to that

@GenghisKhan311 7 ай бұрын

I'm terrified of this wheel😂 the power is insane.

@Acolis 7 ай бұрын

i dont think youre supposed to ride these wheels at limit. the power is a safety margin

@sethdick4196 7 ай бұрын

How can you post a video saying all settings and what the mean, and not know what high speed mode does, ? Don't get me wrong it's not a bad video,.. but how about LYNX and what some settings mean...😂

@guillaumenguyen8257 7 ай бұрын

nice video, thank you!

@marek8902 7 ай бұрын

What battery version is your lynx?

@openpalmclosedfist2282 7 ай бұрын

great idea. i bet if you leveled those heads and use a grinding wheel from a dremmel to put in a castle point you'd have the best pedals on the market for grip.

@openpalmclosedfist2282 6 ай бұрын

This just in, they don't grip with softer rubber shoes. Got my linx in today and did just this, i have riding boots i think would fare better. most people ride with shoes though so it may not be the best option

@JarerSaro 7 ай бұрын

oh the lcd flat wiring some of it disengaged you need to replace it; also the water will sip in once you open it and assemble back, to make sure put a silicone compound around the lcd and whole cover fittings to lock the gaps protect from rain

@horasano 7 ай бұрын

Angle point is comming with 40 degree as a default, I didnt change it.Should be 45 or 40 is enough for street ride?

@GenghisKhan311 7 ай бұрын

55 is what everyone is suggesting or the wheel will spin out of control

@Riceman-o1p 7 ай бұрын

If your power button gets squeaky or gets caught up E wheels will send you a whole new cover. However I solved it with graphite powder.

@czaras_ 4 ай бұрын

Can u give us a hint how to do it with graphite powder?

@-JohnSmith- 7 ай бұрын

Those tiny set screws have a clear rubber piece that locks it into place on the handle so the seat pivots up at the other point of the larger screws.

@MBusa69 7 ай бұрын

Thank you so much for this Great job💪🏻🙏🏻😉

@WalrusHal 7 ай бұрын

A settings import/export function would have been useful..

@sadspamspam 8 ай бұрын

Just got my Lynx and this was super helpful. Thank you!

@milordas 8 ай бұрын

And as always ppl do, you forgot to show advanced menu settings - enter menu settings, then keep pressing button and enter advanced menu settings. Those what you show, is pretty standard for leaperkim

@boblatkey7160 6 ай бұрын

Well get busy and make us a video showing us what the advanced settings can do. I am waiting

@milordas 3 ай бұрын

@@boblatkey7160 thats what we all need to know, but no one knows. That is point for the toppic - all settings

@dustinhankins2153 8 ай бұрын

It’s not looking so agile. Tight turns look difficult.

@Riceman-o1p 7 ай бұрын

It's very agile. This video isn't doing it much justice. I take mine off road in rocky sections with narrow lines and it just rips! It eats up the bumps and it's actually quite agile for an 88 pound wheel. I'm already finding it a little bit boring on the street. Much funner to go tearing up the trails.

@唐人街快车 8 ай бұрын

I think you have your pads on backwards.

@bobelminero1427 8 ай бұрын

great video

@matthewearl9824 8 ай бұрын

I have absolutely no problem with the stock pedals or the jump blocks.

@trevorshields7347 9 ай бұрын

Typical Chinese quality and not cheap either!

@MathieuTechMoto 9 ай бұрын

Thank you !

@mathieucharroisaerialprodu6161 9 ай бұрын

lol the info i wanted you dont want to touch it :) about voltage setting, it is hard to find info on leaperkim device

@openpalmclosedfist2282 7 ай бұрын

right? I was interested in the voltage settings. i bet you if you went lower voltage you could get much better range.

@boblatkey7160 6 ай бұрын

If you have an extremely accurate voltmeter you can measure the true battery voltage and then check it up against the read out and adjust it if necessary. Otherwise don't mess with it.

@JaviVisible 9 ай бұрын

Thx for the vídeo 👌🏼😉

@revolutionaries007 9 ай бұрын

The pedals on the lynx imo work really good and I find no need to do anything to them... I have a few begode wheels and coming from their really good pedals to what I heard about these before I owned my lynx was that they are terrible & I just dont agree, they work really nice and are easy to move my feet yet good enough to keep me locked in place.... Cheers

@Riceman-o1p 7 ай бұрын

Same

@usmcmsgt5487 9 ай бұрын

How do you know if you have the first batch....? I want to purchase the veteran lynx 62 lbs suspension but don't want the 1st batches...... Looking at buying one in the next couple weeks.

@brianonwheels 9 ай бұрын

Ironically it seems like batch 2 is facing more issues than batch 1 and now they’re skipping directly to batch 3 in March

@partypolice2762 9 ай бұрын

I too like the “toilet flip” option. It just adds something else to do in what would otherwise be a simple seat. I guess having it loose allows us to spot clean the top once in awhile. 🤔Maybe mod a secret stash on the underbelly of the seat?

@partypolice2762 9 ай бұрын

Any settings to disable the rear taillight? Sometimes we want to be the literal “unseen ninja in the night” without resorting to removing the device altogether. 😂

@BlackSheriff84 9 ай бұрын

Just short press the power button

@marlinkeys3972 9 ай бұрын

Can I ask you a serious question when you do a free spin test what’s your numbers versus normal mode versus high-speed mode?

@rag7540 9 ай бұрын

The worst seat design ever

@jacobevans18 9 ай бұрын

It's not supposed to pivot on the handle like that it has set screws....

@BigORider 9 ай бұрын

What settings do you use and why?

@omidel. 9 ай бұрын

there are hiden settings ...do you know to acces them?

@BlackSheriff84 9 ай бұрын

👀

@Riceman-o1p 7 ай бұрын

Enter the first menu and then long press the same button and that will get you into advanced menu.

@rey1529 9 ай бұрын

'Promo sm'

@bookmark2846 9 ай бұрын

I pasted some strips of Vicious Grip Tape on my stock pedals and the pedals feel much grippier now.

@pacochawa2746 9 ай бұрын

Anybody have some random lundging issue with the street tire on the lynx? Any tips? Im thinking maybe adjust psi or just throw the damn thing away.

@bookmark2846 9 ай бұрын

I've got a street tire on it and don't notice any issues so far, but then again, I've been riding it gently while I get used to it. I'm riding at 40psi.

@pacochawa2746 9 ай бұрын

I will try psi change.

@matthewearl9824 8 ай бұрын

@@pacochawa2746 Your PSI must be at least 38 when using tubeless. I don't know what lundging means but I hope that helps.

@pacochawa2746 8 ай бұрын

@@matthewearl9824 well by lundging I mean the tire randomly turns for some reason. I think the psi was too high. I changed tires and my psi is at 40. Will heed your info thanks.

@pacochawa2746 8 ай бұрын

@@matthewearl9824Gotcha Im running 40 psi now and no tracking experienced.

@curtflirt2 9 ай бұрын

Just get rid of the stock pedals and get some E-rides ones or some from Clarkpads, they have ones as well

@Happyantix112 9 ай бұрын

That adds $200+ to the cost, this fix is free

@pacochawa2746 9 ай бұрын

Well would you put chinese tires on a ferari? Ride your own ride by all means. Erides pedals are sweet. Rode 2 and a half hours and my body gave out before my feet did.

@Happyantix112 9 ай бұрын

@@pacochawa2746 do new pedals really make that much of a ride difference apart from grip?

@matthewearl9824 8 ай бұрын

I have both and to me there is not that much difference. Just my opinion.

@matthewearl9824 8 ай бұрын

@@Happyantix112 My opinion, no. Your shoes definitely do. I am not saying they don't matter on all wheels. I just think my patton and lynx are better stock than my other wheels were stock. I would never consider upgrading the pedals unless i wanted a different color.

@ludovitstros6783 9 ай бұрын

Thanks. Can I change all that in the mobile application?

@brianonwheels 9 ай бұрын

some but not all of the settings can be changed in the moblie application

@familytvbox5218 8 ай бұрын

Yes you can, but it depends on what app you're using.

@GenghisKhan311 7 ай бұрын

@@familytvbox5218which app do you perfer?

@marlinkeys3972 9 ай бұрын

Do you have problems with it wobbling or feeling unstable when you try to break

@brianonwheels 9 ай бұрын

Yes but as time went on I learned to control it! I also bought pedal drops that made it a lot easier to ride without wobbles. I’ll post a video soon so stay subscribed!

@marlinkeys3972 9 ай бұрын

@@brianonwheels ok

@BlackSheriff84 9 ай бұрын

Yes, I found that bending my knees a heap to basically get in the seating position behind the wheel helps 👍🏽

@Riceman-o1p 7 ай бұрын

Yes, keep your back straight and get your ass way behind the wheel and also try to carve a little bit. Keep practicing and you will soon find a braking method where you will have zero wobbles. Also be careful at speed because you can get them there too. Always be turning a little bit. The higher the tire pressure of the more likely you will wobble at speed. You are most prone to it after and acceleration and when you let up and relax a little bit. Also be careful of wobbles when going downhill at speed.

@marlinkeys3972 7 ай бұрын

@@Riceman-o1p thanks

@marlinkeys3972 9 ай бұрын

I have a question mine will only free spin maybe 60 to 62 miles an hour on a full battery and it’s making this weird noise like this running while sitting still is that normal?

@Riceman-o1p 7 ай бұрын

Yes that's normal. It is peculiar though. It almost sounds like oil moving around in the suspension. I have a lot of miles on mine and I hear that noise also but it's nothing to worry about.

@pacochawa2746 9 ай бұрын

What are healthy battery cell numbers.

@Riceman-o1p 7 ай бұрын

That question is too vague. Please elaborate.

@boblatkey7160 6 ай бұрын

4.2 V/cell @ 100% SOC. 3.2 is about dead.

@pacochawa2746 9 ай бұрын

Thanks just got my ride. Very helpfull.

@marlinkeys3972 9 ай бұрын

Thanks again you are the man

@brianonwheels 9 ай бұрын

Just trying my best to great quality content! :-)

@marlinkeys3972 9 ай бұрын

@@brianonwheels keep it up

Ең жақсы KZbin

Пікірлер