Im having fun but I aint sure should I drain the tank on my 67 Ranchero before replacing the fuel pump? Stupid question.
@markriley82994 күн бұрын
I’ve been looking for the halo harness for 67 but can’t find you ebay store.
@Oldcarnut6319 күн бұрын
And then there were no more videos??
@jorgesegura2317Ай бұрын
This may work while driving and changing lanes during highway driving. But if your making a turn, at a stop light you normally have the brakes on... How does the sequential circuit work when the lights are already on?? I think you need a separate bulb circuit for turning and brakes.
@CMOSXАй бұрын
You have to use dual filament bulbs or in my case I used two step LEDs. When the brake is depressed the lights engage and when you engage the turn signal the second filament or LEDs on each bulb turn on.
@jliving7328Ай бұрын
Pull the heater control swith out of the dash 4 Phillip screws next to the cluster and go through the hole to get to the speedometer cable nut
@heycouper629Ай бұрын
Oh shit. This dude does look like Negan 🤘
@PizzaMan328242 ай бұрын
Hey man, I have a ‘67 with the same hood latch. Unfortunately, mine is stuck shut. When I push the lever up, the secondary latch moves off as it should, but the primary latch on the bar does t move at all. Any tips on how to free that latch from the bar? I’ve attempted some tips from older forums, but no Luck.
@sonsonny10002 ай бұрын
I'm trying to restore my clusters chrome too on my 68 bezel. I bought some wood vinyl to put on the black area. Did the chrome pen work on the two bigger parts where the speed is ?
@michaelgayford24392 ай бұрын
Pathetic
@DannyReckless132 ай бұрын
What kind of battery do you use for testing?
@slappy19652 ай бұрын
Do you need any silicon or sealant along with the provided gaskets?
@Marks78firebird2 ай бұрын
are the kits still for sale? the links dont work
@hovlandbound3 ай бұрын
That was great!! This winter I will be looking at these videos again and tackling this project. Don't want to do that now, I need to drive it. :) To bad there isn't an easy way to re-chrome the large chrome areas. mine look bad but it will be good enough and nice to keep the original in. Thanks so much, this really helps.
@hovlandbound3 ай бұрын
Super!!! Just what I needed. Still not real clear how you got that speedometer cable off. Were you able to do it just by your fingers? No wrench needed?
@AmericanMuscleCarTV3 ай бұрын
I replaced with the standards but after this - I think we need the LED ❤
@matthewkral61513 ай бұрын
Hey just installed the same kit. Did yours rub slightly on the dust cover?
@terry49123 ай бұрын
That guy really does look like Negan. Anyhow great video. I was having a problem with a fuse blowing for the radio/ signals in my 73 Mach one. I installed an old spoke wheel similar to the Grant. I checked everything then I decided to pull the wheel off and it fixed the problem. I'm missing the plate that makes contact with the Horn and it was grounding out when I turned the wheel. Thanks..time for that new wheel with the proper kit.
@jakeladd65693 ай бұрын
Hey Negan, I went to your website to purchase the adapters and it says the page isn’t available. Are these still for sale ?
@modelopapi57814 ай бұрын
Random but you look like "GOOSEWAYNE"
@eloyserna37644 ай бұрын
Negan, I just found your channel. Thanks for posting it is helping. I am currently an converting a 66 mustang from an inline six to a v8 289. How are you liking the CSRP brakes?
@draguroyalty50454 ай бұрын
How it was done ?
@kurtiswilcox52944 ай бұрын
Song... Really really sucks... And!... No music is needed, just some pure sound of the car is needed, do a repost with the car making the music dud.
@drewschumann15 ай бұрын
67 and 68 are completely different, depending on when in 67 your car was made
@raulgonzalez20525 ай бұрын
Appreciate any help.
@raulgonzalez20525 ай бұрын
I'm installing a Leed booster and m cylinder. I'm keeping original front disc rear drum setup. Do I still need to install the proportioning valve? If so, would the go on read drum brake line?
@ishmaiilrasalaam77685 ай бұрын
Hey where do you get your steering wheel puller from my adapter is stuck didn't go all the way down on my steering wheel.....
@twllinmartinez38365 ай бұрын
What happened to your eBay store? I'd like to buy these harnesses
@bryantlaprade84775 ай бұрын
None of the links work, definitely interested in doing this to my 67
@glennfriedler25575 ай бұрын
I like that color
@LipFillerMustache-gd6mr6 ай бұрын
do you have to drain coolant or oil before removing fuel pump?
@expertxx99234 ай бұрын
It's been a month since you commented so you probably already figured it out but the oil & coolant have nothing to do with your fuel. Simply disconnect the two lines, one is a 1/2 nut one is a pinch clamp. Then you have two 1/2 bolts holding the pump and when you remove it nothing comes out. Some fuel will come out of the lines you disconnected but not much.
@ilike9s6 ай бұрын
When you making a new batch of harnesses?
@PieceOfPizza-bi1em6 ай бұрын
great vid
@jamesclark89826 ай бұрын
Let's here the car not the song
@BPattB6 ай бұрын
Appreciate your videos, man. Hopefully you make some more!
@robertclymer69486 ай бұрын
Hey again Negan!! Ok, the braided lines came with your CSRP kit. I am doing rear drum to disc conversion and CSRP makes only Front kits. I found All Star brand on Amazon but the connectors are different. Thanks! Hope everything is going great with you! Any new videos on the horizon? Cheers from Motown! Did the adjustable Prop valve come with the kit too? Like like the bracket setup a lot.
@bryanpiereson80836 ай бұрын
SOB! I just put on one of these on my '65 Mustang and as soon as I connected the battery I had a huge short circuit. I took it apart and found that the the copper plate on the hub didn't have a break in it like yours does, so the sliding contactors complete the circuit, bypassing the horn switch. Manufacturing mistake. And yes, the cap design is crap. It will fall off in no time. Overpriced PoS .
@mwh32276 ай бұрын
Is your store still operating?
@graybeardproductions25976 ай бұрын
I'm swapping from a 221 to a 289 in my 62 Meteor. The fuel filter hits the sway bar. Turns out this fuel pump has a shorter arm than other sbf pumps. What a handful. Glad you showed that the filter assy comes off. It's a learning curv
@adolfoojeda74456 ай бұрын
Buenas noches disculpe también se podra en un Maverick 1970
@mrsaiyanaa7 ай бұрын
Are you still making adapters?
@paulferrara90797 ай бұрын
sorry, almost watched this. music ugh....
@PR-nq4dt7 ай бұрын
It would of been easier to glue the weather strip on your trunk first then installed it but either way thanks for the tutorial!! I also noticed the left side of your trunk was a little higher than the right side, often times with aftermarket parts they don't fit as good as originals. To fix this requires a little massaging, sometimes it helps to take the side that's higher and very very gently bend it downwards and it will fix you problem. Again, thanks for the tutorial!! 👍
@PabloMartinez-i1f8 ай бұрын
Where I can buy those ligths
@democrat74419 ай бұрын
The diaphragm of the pump will rot out after it sits for many years. The truck I bought had the pump dumping fuel into oil pan. Truck sat for twenty years.
@TheBucketDude9 ай бұрын
for some odd reason the nut for the speedometer cable doesn’t WANT to screw onto the dash cluster for mine and now LEDs seem to be dead
@minyoungc_9 ай бұрын
Thank you for these very detailed videos on the CSRP kit, I'm getting ready to install mine and it's nice having all my questions answered after going through the instructions and not completely understanding what needs to be done.
@BPattB9 ай бұрын
Was there a spring under the original steering wheel? I have a 65 and it has a spring. I'm wondering if I use the spring or not. The instructions don't show a spring
@Titan-uy1qy9 ай бұрын
Beautiful car brother congrats. Currently working on restoring my 66. Redoing the wiring right now. Actually looking into if I want to upgrade the bulbs. Halos look awesome. Thanks for the video. God bless
@BPattB10 ай бұрын
How much did your kit cost you? I bought a kit from Speedway for 430ish
@BPattB10 ай бұрын
Here I am again. The halo lights I installed came out great. I used the relay harness and the no splice harness I believe I bought from you or you sent me in the right direction to get one. I'm putting a new wheel in, the 16 factory wheel was just too big. The 14 I got is going to make me do the electric power steering a lot soon I bet LOL. Thanks for the video man.