monitor air fuel ratios and knock (engine ping) , also oil T
@AndyShear4 ай бұрын
Good suggestion! We’re changing out the oil pan as that’s probably the culprit; multiple companies make a special pan for this engine as it’s used in mini sprints. Prevents this very issue. Will definitely add some more sensors; what’s measured is managed!
@Edwinke11ey4 ай бұрын
I wish you guys could do a rail with my R1 motor
@AndyShear4 ай бұрын
Those sound amazing!
@jamesmalloy96267 ай бұрын
What fuel pump assembly are y’all using.?
@AndyShear7 ай бұрын
Stock GSXR pump in an aftermarket tank we got from previous owner. Not for long though! Look for our next video where we explain our entire fuel system, then upgrade to a whole new one!
@jamesmalloy96267 ай бұрын
Injectors clean easier reversing flow.. goes out inlet way better…
@AndyShear7 ай бұрын
Makes sense, will continue to improve our cleaning method!
@jamesmalloy96267 ай бұрын
@@AndyShear also there’s a hidden filter on hayabusas not sure if it’s on any other Suzuki bike. Best to do bypass n external filter
@306GokartsCustomBuilds7 ай бұрын
What those rear shocks from
@AndyShear7 ай бұрын
RZR XP 1000, they’re Walker Evan’s. Really nice shocks. Picked up all 4 used for a good deal, there’s plenty of these out there!
@306GokartsCustomBuilds7 ай бұрын
@@AndyShear great 👍
@andresromer87158 ай бұрын
Hi, I’m looking this video and I want to ask about the ceiling and walls stick papers ?? Name of it ? And where did you buy it? Thanks
@AndyShear7 ай бұрын
We got the wall fabric from Joe Anne, it’s just a pleather that matched the front of the trailer. The ceiling was a specialty trailer item. We used 3M adhesive, but some rolls come with their own like this link: www.recpro.com/soft-touch-rv-padded-headliner-ivory-50-wide-kit-includes-adhesive/
@jmann22338 ай бұрын
Fire, broskies 🎉. Can't wait to watch her climb.
@jeffreydecker31898 ай бұрын
Oh yeah baby this is how I feel when I get 6” off the ground on my 690😂
@mattybrewer8 ай бұрын
Heck yeah man🤘🏼
@ng64248 ай бұрын
Sweet stuff
@OversteerEngineer8 ай бұрын
Both of your buggies are superb 🔥 Its been cool seeing them evolve. Any Idea on how to solve the oil starvation problem without a dry sump? I’m building a crosskart with a gsxr1000 k7 which is the same as k8 if I’m not mistaken. I know that the guys here in Sweden that race crosskarts put more oil in their engines. But they run 600 and 750 engines.
@AndyShear8 ай бұрын
There are definitely solutions out there, we just decided to revert to what we know works. We also had a Gen 1 Busa in a sand rail that never did this, so that’s the power plant we will probably end up with. There’s plenty of companies that make modded oil pans for circle track sprint cars! Yoshimura even has one for the newer GSXR1000, there’s plenty of options for older years too. We also recommend adding an oil pressure gauge somewhere. The 1000 has the external cooler; ideal place for inline gauge. We never saw the oil light on the dash, but it definitely starved bearing #4 consistently. www.yoshimura-rd.com/products/gsx-r1000-17-21-mod-lite-billet-oil-pan
@OversteerEngineer8 ай бұрын
@@AndyShear didn’t know about those oil pans, I’ll look in to it. An oil pressure sensor with a really bright warning light might be enough for me. Thanks!
@ryanr307111 ай бұрын
So bad ass. Where can i buy a buggy like this? I want a similar project but with a busa set up
@AndyShear7 ай бұрын
Best bet is to find a used frame and modify. Check out Protolite Racing! They make an awesome drop in rear end cradles that allow you to bolt in different super bike engines.
@mrslam49 Жыл бұрын
Does the clutch hold up with all that weight?
@AndyShear7 ай бұрын
Still running today! The poor warrior motor needs a top end tho 😅
@killerbizz Жыл бұрын
hummmmmmmmmmmmmmmm
@TheZacc92 Жыл бұрын
Hi, how do you deal with the clutch, I have a gsx600f and I have already replaced three clutches?
@jeanmattison3600 Жыл бұрын
You all did an Awesome remodeling project. I wish I had that kind of room, to add a bathroom. You are a Lucky Lady.
@jeanmattison3600 Жыл бұрын
You
@kartguy Жыл бұрын
Whats the link for the reverse shfter I want to use the same one I built something just like this lol I know its been a while but hoping to get a reverse handle like you had, thanks!
@AndyShear7 ай бұрын
Check out the barn kart videos, I ended up using a Clutch Master/Slave assembly so I didn’t have to do a manual linkage! It works really well, made a big o’l lever on the master and it pops right into reverse.
@kartguy7 ай бұрын
OK I will thanks so much buddy!@@AndyShear
@adamchristensen1338 Жыл бұрын
Nice job guys bad-ass I got an 0304GSXR 1000 I was wondering if you guys could give me a simplified wiring diagram for buggy build I can't seem to get mine right
@AndyShear7 ай бұрын
This is where I get all my info from: www.manualslib.com/manual/1286279/Suzuki-Gsx-R1000.html?page=545#manual
@emmettcoen2 жыл бұрын
You didn't show any of the build?? Music is mental loud...
@AndyShear2 жыл бұрын
This was just the engine swap video about a year after construction! My buddy and I built the frames at the same time, I filmed my entire build here: kzbin.info/www/bejne/nYakY2R7fZ2noc0 I’m sorry about the music! I suck at making videos, definitely noted for the future. In the meantime, turn on CC and mute me 😆
@phillipmassey8882 жыл бұрын
𝓟Ř𝔬𝓂𝔬𝐒ϻ 💕
@KJRaycing2 жыл бұрын
Dude that looks so great! Nicely done!
@carnivorecave2 жыл бұрын
You'll have to reinforce that rear axle so it dont bend. Check out Red Beards Garage he did a cage like reinforcement design...
@AndyShear2 жыл бұрын
I’ve seen his design! Not a bad idea if I keep the straight axle. We are planning to rebuild both buggies with reverse boxes and convert mine to IRS this winter. You’ll have to watch next video to see what happens to this axle…
@charlyv1511 Жыл бұрын
Make more videos of your buggy! its soo niceee
@richardkautz29472 жыл бұрын
So badass, that's been a dream of mine since I was just a kid !
@shannonstabler89252 жыл бұрын
Hey Andy I'm doing the same thing with my buggy and I'm trying to use a raptor engine 02 model and I am having problem getting spark everything checked out on my fluke for the ohms test I am trying to use a AC CDI box instead of a OEM CDI box just wondering if you might be able to help me out thanks a million sincerely Shannon Stabler
@AndyShear2 жыл бұрын
I can only suggest using OEM parts! Warrior/Raptor parts like this are cheap on eBay, my Warrior motor has many eBay parts!
@maxprofitflips8412 жыл бұрын
Ohh and can you somehow get it street leagal
@maxprofitflips8412 жыл бұрын
Did you use a third pedal for clutch?? And was that a Chinese frame off of a 150 or 200 cuz I know their metal doesn’t last to long have you experienced any problems with cracking in the frame??
@AndyShear2 жыл бұрын
Yes we made custom pedals, you should watch my drift buggy build videos! We build this whole concept from the ground up, this “bastard buggy” was a prototype piece of 💩 that needed to die sooner rather than later. The frame was hardly recognizable at this point after our structural enhancements. We chop it to bits in the barn cart build video! Would not recommend building off a cheap frame if you intend to keep it; we used this as a proof of concept then destroyed it. I have my buggy registered as a home built SXS in NM, will use a company like dirtlegal.com to upgrade to street legal here soon. This build series should answer a bunch of questions: kzbin.info/www/bejne/nYakY2R7fZ2noc0
@maxprofitflips8412 жыл бұрын
@@AndyShear ohh ok I’ll watch them thanks I’m doing a vw build I’m using a different engine but I plan to do a gsxr 1000 first
@AndyShear2 жыл бұрын
@@maxprofitflips841 that’s a great platform! We have an ‘08 in our other buggy. Good luck on your build, can’t wait to see what you come up with!
@maxprofitflips8412 жыл бұрын
@@AndyShear can you get it street leagal
@AndyShear2 жыл бұрын
@@maxprofitflips841 yes read up on dirtlegal.com I had a level 3 VIN inspection by a local LEO, and got a VIN from the MVD. Registered mine as a SXS first with on road tags here in NM, but I could upgrade to a Montana plate and corresponding LLC to get full street legal plate using dirtlegal website. I drive my buggy on designated roads for the time being. All that info is in the build series.
@maxprofitflips8412 жыл бұрын
Hey so I I have a couple Questions
@connersnow2982 жыл бұрын
Awesome video and build
@1972butchy2 жыл бұрын
Love it brother
@greenwolf70832 жыл бұрын
That's sick bro.!!
@yokobross89862 жыл бұрын
Hello friend I have a similar project I will put an engine of a suzuki katana 600cc I have independent suspension of a yamaha raptor,
@Tee-e4i2 жыл бұрын
Nice one but lot of unnecessary stuff on this video or less educational.
@AndyShear7 ай бұрын
Absolutely! My video production kinda sucked back then, working to improve my new videos!
@dippedvisionliquidwraps41803 жыл бұрын
Hey Andy, is there any way to get blueprints for the build?
@AndyShear3 жыл бұрын
Unfortunately we did not model this build. Mark sketched out a design he liked based on multiple different frames we’ve seen. I copied his dimensions and altered it slightly. My build video shows how it all went together, we hope to model our future builds but we’re still learning and experimenting! kzbin.info/www/bejne/nYakY2R7fZ2noc0
@Hermanimace3 жыл бұрын
2:04 the tree 😂
@AndyShear3 жыл бұрын
Pretty close! I just relocated that tree with the tractor this week, enough close calls 🤣 it’s a miracle someone didn’t hit it
@Hermanimace3 жыл бұрын
yesterday i bought an engine from gsxr 1000 k5. When I see how the 750 goes, I'm already looking forward to it. I would be interested in the details of your geometry. The buggy seems to be driving very well.
@AndyShear3 жыл бұрын
Awesome! Check out our new videos, we used all this buggy’s parts to build our own from the ground up. I bought another GSXR 750 and built a swingarm version, and Mark used the Protodie rear end for his. We upgraded Mark’s engine to a K8 GSXR 1000 and then spun a rod bearing 🙃Crank at machine shop so that buggy will be back this fall. Here is my full build of swingarm buggy kzbin.info/www/bejne/nYakY2R7fZ2noc0 this video series also features some of Marks build before we engine swap the K8 kzbin.info/www/bejne/q4KuZWlmjq9_bJY your K5 is a reliable and highly sought after GSXR motor, I hope it serves you well! Can’t wait to see your build 👏🏼
@brahian493 жыл бұрын
Hey Nice buggy
@OversteerEngineer3 жыл бұрын
Sick! What year is your gsxr 750 engine?
@AndyShear3 жыл бұрын
Thanks! It’s an ‘09
@joshuahinerman39813 жыл бұрын
So tell me this why would you not cut the bracket take out all the shims reweld the bracket and make it proper without all the shims
@joshuahinerman39813 жыл бұрын
Both cable issues are completely easy fixes it just shows how amateur you guys hard that you can't find a way to fix them and are just going to call it a cable muncher pretty pitiful
@AndyShear3 жыл бұрын
You should watch our recent videos, we cut the whole buggy apart and rebuilt. Thanks for the input!
@joshuahinerman39813 жыл бұрын
@@AndyShear np.. thanks for not taking input tbe wrong way Ike most wankers...
@joshuahinerman39813 жыл бұрын
Absolute cheapest quality build I've ever seen but I guess it works to a point. You said your building your own frames now I sure hope to god its nothing like what your building now
@AndyShear3 жыл бұрын
God love the bastard buggy!!!!
@mattprice376643 жыл бұрын
Dude you need to add some wrist restraints and attach them to the steering wheel. it might keep you from being an amputee.
@AndyShear3 жыл бұрын
I know scary shit watching these old videos!!
@anthonyslaughter45943 жыл бұрын
Good looking buggy wanted to ask what size tubing did you use and about how much did you use
@AndyShear3 жыл бұрын
6 sticks of .120 wall and 2 of 14ga
@RidingNQ3 жыл бұрын
Always love watching these large displacement bike engine swaps 👍
@Hermanimace3 жыл бұрын
Yea … 😀
@brookbox99363 жыл бұрын
Where Did you Get this Buggy? And How much is it? (Also is there a 2 seater?)
@AndyShear3 жыл бұрын
Bought locally, destroyed years ago, watch our new videos!
@brookbox99363 жыл бұрын
@@AndyShear awesome! thank you so much
@scottbelyeu73823 жыл бұрын
Bad ass little machine. I have a 4 seater with a gsxr750 in it. .I'm trying a FNR gearbox but it's a cheap chinese model and seems to have problems with the HO and torque.
@AndyShear3 жыл бұрын
Ya that probably won’t work with this power
@tylerwaughtal57793 жыл бұрын
love the buggy, what atv rearend is that? I'm building something simular and still try to figure out the axle
@AndyShear3 жыл бұрын
Raptor 700
@mohsenanousha90353 жыл бұрын
Hi Andy, I'm Mohsen. Can I have your Instagram idea?