Thank you!

Thank you! And good luck with the table build!

I still don't understand why there was a bit of flex after I glued the boards together. Back at that time I've put some newspaper sheets on my workbench when glueing and maybe there got a little bit of newspaper in 1 of the glue lines. Just make sure to properply glue and no need to worry!

Thanks for the nice words and your thinking on the bench! I must say the mdf is still on there and only slightly worn at the edges. Still super flat even though you're completly right about the sagging of MDF but I guess I'm lucky on this one. Plywold would be better indeed. And the routertable has kept strongly in place evee since but there's a piece of plywood underneath where the router is attached to. Due to the fact that mdf doesn't hold screw that well indeed. So Plywood would solve possible 2 issues indeed! Thanks!

Thank you! Nice to read compliments not only about woodworking!

Oh like some rodeo rock thing? Nah, my videos need to be calm. The same vibe as what I experience when working.

Really? Didn't know! Tbh, I recently replaced my router table plate for a new aluminium plate. The main reason being is my Hitachi router broke! And I thought I upgrade to a Triton TRA001. If you don't find trespa just do it with plywood. But use some small metal plates where the height adjustment bolts hit the routerplate or you would just drive them in the plywood after some time of use. Thank you for the nice words!

@@ygonmade I like the aluminum idea. Maybe anodized so it's not so shinny and glaring in your face from the shop lights. You have a great design. When I'm ready to set up my new shop I will be getting a set of your plans

Good luck with setting up your shop! Always fun to plan all things and see them come together. And then realising all the other things you also want to do there :p

And I'm still using and loving it everyday! You'll see in my later videos. Thanks!

@@ygonmade just watching your new workshop video - absolutely great channel my friend, I hope you continue making videos

I certainly will! Atm I'm doing some projects I can't easily film but more videos will certainly come later this year! Thank you for all the kind words 🙏

Thank you! Means a lot!

Thank you! Still use it and love it everyday!

We're a year later and I still don't own any parallel clamps. Very happy with the sub though! Thank you!

Thank you Richard!!

I've been training my magic skill lately. Glad you like it Louis! ❤️

Hope you like it Daniel!

Thank you! And yes I doesn't all need to be about selling stuff. Although I understand why channels do this. It's what they pay their bills with and keeping their content free for you to watch. Some even mark the length of the add so you can skip if you want. But people like @Bourbonmoth make the ad just so funny you don't want to skip and that's how videos should be done! It's funny what you say about the jig because this week I added a link in the description to download Sketchup files for the chamfer jig and table! But 10k viewers have passed before I thought about it. :) Hope you like the other videos as well and might follow my woodworking journey! Thanks again!

@@ygonmade Thank you for your reply. I really appreciate that you took the time to respond. I agree with you that people should not do this for free and they have a family to feed, etc. I do respect that. And I really believe that they should sell anything they make, their plans, jigs, products. I'm happy you shared your plans and I'm hope people will buy them to use it. I do use a pen and paper and have not yet decided about Sketchup but if one day I do use the program, I would certainly go and check your plans. My issue is not that. A good number of KZbinr get products for free from manufacturers, they even get wood, etc. and in a very inconspicuous way start selling those jigs and products. There are some of the wood workers who only make videos to talk about these products. I avoid them now. It is paid advertisement. We had here the Advertisement channel and it was exactly this but with household products. My point is that a good number of youtubers have become voice of the manufacturers. I was talking to one of the high ranking executives from a major manufacturer, and he told me how much these manufacturer save money thanks to these influencers. They send them free tools, 10% on any sale from the links (and that is much less than what they give to big stores) and they don't need to invest in advertisements. We don't see any adds from Dewalt, Bosch, Milwaukee, etc. anymore. The worse part is that the KZbinr is not even reliable for false advertisement. Oh, when the KZbinr says: "they sent me the tool for free and no links attached". First of all, fiscally, there is a link attached. When you give some one an expensive tool, even as a promotional item, in USA and Canada and most of Europe, it is taxable, meaning it is an income. In Canada for instance, the item is considered a taxable benefit (if you received more than 500$ of promotional item per year). Again, I believe they have the right to do it as you just said. But they should do it with transparency. They could tell people I recieved this item, signed a paper and this is a paid advertisement. There would be no complain from me at that moment. Sorry for the rant. My main point is that I admire people like you who teach others, and I would buy easily from you.

With weapons you mean jigs or tools I hope?

Thank you!

Normally it should! Because mine was based on a jig used by youtube.com/@foureyes.furniture on a table with more straight edges. kzbin.info/www/bejne/mZfNiGqHerFoeZYsi=igYJwggE3UnWjp35 Good luck with the build!

Thanks Louis!!

Oeh! Valt het zo op? :p haha

@@ygonmade Bwa cavakes se, denk oost of west ? Bij ons limburgers ist blijkbaar erger ;)

Haha :p En inderdaad, West!

Dankjewel Wout!!

It's an old leftover product but basically just a pigmented solvent based finish. Not the most healthy to work with but it spreads and dries fast.

Oh sorry! Thought this was a comment on another video. Oops! The finish used here is Rubio Monocoat Smoke 5%. Check the link in discription. Rubio is an eco friendly oil based product. My go to for anything these days.

Awesome thanks for your response. I thought it might be Rubio. I’ve been using Rubio as well, but I like the color you got out of your project. Keep up the good work!

Thank you!

Thank you Daniel!!

Ofcourse I don't mind! It's my wish to inspire people. Good luck and enjoy the result. Its very satisfying when done.

Thank you!

I feel like the music sets the mood but that's okay if you prefer no music! But there will always be music on my videos.

Maybe not for you but it was for me at the time. I didn't wanted ruin all the work that was done!

Ik zou hier zeker wat meer uitleg over kunnen geven in een video. Goed idee! En deze zou perfect werken op een ovale tafel.

Thank you! I really want to make more and certainly will! I also really appreciate a comment like this 🙂

A small, one man wood supplier company in the same town as Rubio Monocoat's head office! Called Vanhardhout. And thank you!

Dankje Peter! Heel leuk om dit te lezen!

Thank you! Still in love with this table everyday.

Thank you! I'll do that!

Thank you! 🙏

Thanks Ben! Happy I could inspire you with the routing system! It was joy to see the result it made!

​@@ygonmade you have an instruction video on how to make the jig?

Not at the moment no! But you can download the plans through my website and I'm certain you'll be able to make the jig! Just go to www.ygonmade.com/shop-plans

Thank you Jasper!!

Dankje Sjoerd!

I know it's taking some time but somethin's cookin at ygon! Hang in there!

Finally my Etsy has served its purpose! Thank you Lars!

Merci Liesbeth! 🙂

Thank you Daniel!

Merci Thomas! En voor het Rubio advies! 🔥

@@ygonmade anytime! Je roept maar! 💪

Thank you Daniel! Always nice to read. I hope you'll follow me along since a new video is almost ready to go online!

Bedankt! De T-track die ik in de video gebruik kwam van Dictum. De Festool lever klemmen zouden hier moeten inpassen! www.dictum.com/en/power-tools-routing/dictum-t-track-915-mm-707765?number=707765

@@ygonmade Dank je wel.👍

Thanks! It is 1800mm x 800mm or 70" x 31,5". Do you think it would fit your shop?

@@ygonmade Unfortunately not. Thanks a lot.

I've thought about it but at the time of posting I thought this wasn't a huge priority. I am planning on doing this in the future and especcially now I know there's an interest in this list! Thanks for letting me know!

Thank you! I really appreciate the support!