The new Cobra looks killer. Any plans for integrated Bluetooth programming or at least B-Link compatibility in them in the future?
@TrokaRC28 күн бұрын
Just installed this on the slash. 👍
@silentwonder-chilledАй бұрын
The mamba XLX fails to calibrate with a Flysky fs-gr3e receiver...i will never consider electric rc again it's crap...Nitro & Gas for the Win.
@craiglamb9029Ай бұрын
THIS IS WHY I BUY CASTLE ESCs!
@nicholasriley96762 ай бұрын
Love Castle! My cobra 8 has problems with low throttle and soft starts, even on the highest punch level. So disappointing.
@PoweredByCastle2 ай бұрын
Have you tried the newest firmware update? It is 1.14 and it improves sensorless motor operation under heavy loads and hard acceleration, reduces cogging on startup with sensorless and sensored motors. it is free to download with Castle Link 2 program and the USB adapter included with ESC.
@nicholasriley9676Ай бұрын
I have. Nothing has helped. I changed radio gear twice, the same. I run 2-MMX8S and a mamba x and they run flawless. The cobra for the MT410 runs like junk.
@PoweredByCastleАй бұрын
@@nicholasriley9676 we have another firmware update this week, it should fix. If not, we need to get you with Tech Support.
@nicholasriley9676Ай бұрын
I did the update today and will see if everything is good when I put it back into my Mt410 tonight. Bench test went good.
@nicholasriley9676Ай бұрын
Ok, now I've put 4 packs through my mt410 and power delivery is much much better in forward. The breaks!? What is going on? Totally stock setting for the first run and snap, the front dif is toast from applying very little break force. Now it glitches randomly when hitting the breaks and just locks the tires up for a split second. I changed the break curve and still dose the same. 😓
@FredrikOlesen2 ай бұрын
Just Waow❤ Castle Creations is the best ever in Esc/Motor in the RC game🙏🏽👌🏾
@user-hu1ji3zt2p2 ай бұрын
How come mine all say made in china on them. Did i buy Knock offs?
@PoweredByCastle2 ай бұрын
If it is a Castle ESC it should not say made in China. If it is a Castle motor, it should indicate COO as China.
@MINGz993 ай бұрын
battery 3s 3000mah 60c can use?
@MegHumper4 ай бұрын
fire whoever didnt include the startup sound
@PoweredByCastle4 ай бұрын
Whew! It wasn't me. :)
@NeighberhoodRC5 ай бұрын
I have a aarma notorious 6s I wanna upgrade it the the castle 8s esc and motor
@PoweredByCastle5 ай бұрын
Awesome! We have a recommendation for Monster X 8s w/1520-1650kv - 14 pinion/50 spur on 8s = ~60MPH or Monster X 8s w/1717-1650kv - 16 pinion/50 spur on 8s = ~70MPH!
@NeighberhoodRC5 ай бұрын
@@PoweredByCastle I seen someone made they aarma 6s using monster combo go up to like 110 mph is that possible?
@NeighberhoodRC5 ай бұрын
Is that the original transmitter and receiver that came with the car ?
@Brayl129a16 ай бұрын
Will it fit in the sledge
@TheBiteSize6 ай бұрын
Do Rc did a great job
@Chris-adams-rc-journey6 ай бұрын
Cant wait for what you guys have in the works. Need to pick one of these up and push it on 2s and 3s HARD
@10krms546 ай бұрын
How many amps is it n will it compare yo the monster 8s same price
@IsaacSchultz-lz8jc6 ай бұрын
Is this going to be a replacement for the mamba x series or is it just a new series?
@make4all20006 ай бұрын
Best rc electronics on the market..good job !!
@SurRon-GLE6 ай бұрын
Pull out the card and it said out of stock killed my head
@UAERCADDICTS6 ай бұрын
We need 12 s
@UAERCADDICTS6 ай бұрын
😢
@PoweredByCastle6 ай бұрын
The journey of a thousand miles begins with one step. You’ve just watched the first step. :)
@UAERCADDICTS6 ай бұрын
@@PoweredByCastle well i am waiting
@PhilBender6126 ай бұрын
Looks sick castle! 🏰
@PoweredByCastle6 ай бұрын
Thank you! This has been a long road and we are excited for what's to come!
@traxxassmiff60946 ай бұрын
😳Gold looks Kul
@PoweredByCastle6 ай бұрын
Thank you! The Limited Edition Gold is due to ship in a few weeks!
@Infraction2366 ай бұрын
No xlx 12s 😢
@PoweredByCastle6 ай бұрын
The journey of a thousand miles begins with one step. You’ve just watched the first step. :)
@rtz5496 ай бұрын
@@PoweredByCastledon't limit at 12x. Push it to 14 or 16 or beyond.
@hemistormrc6 ай бұрын
🎉 YES!
@DarkGouki2026 ай бұрын
Nice
@musaedalqattan89766 ай бұрын
i love all you products but today i leave futaba worlds and i buy professional flysky nb4 pro so i hope you make data link compatible with nb4pro
@PoweredByCastle6 ай бұрын
Will certainly pass that on to the appropriate party. Happy to hear you are sticking with Castle!!
@shaunwee76586 ай бұрын
Is this compatible on the Castle Creations Mamba Monster X 8S 1/6 Brushless ESC? Do I need to purchase any other connector as well?
@PoweredByCastle6 ай бұрын
It is compatible! The Bluetooth Adapter is the hardware for the mobile application and the app is is compatible with Apple devices (iOS version 10.0 or higher) and Android devices require version 5.0 or higher . www.castlecreations.com/en/b-link-bluetooth-adapter-011-0135-00
@HonkeyKongH6 ай бұрын
Didn’t know castle was American made, guess I know what electronics I’m going with
@PoweredByCastle6 ай бұрын
Appreciate that! All of our ESC are produced in Olathe, KS. Our motors unfortunately are not at this time.
@njdewit7 ай бұрын
They're the pricier option here in Europe, but I'm very happy with my X 8S powering a rocketship of a car.
@PoweredByCastle7 ай бұрын
THANK YOU for choosing Castle Creations and it's so good to hear we are exceeding your expectations!
@saturnfivehynrgrc5817 ай бұрын
Living in Minnesota this is helpful info. As we can see temps below zero ( -F ) during the winter season. I enjoy snow wheeling with the RC's. (Bomber and Ryft) Helpful info Castle, thank you. Like button energized.
@PoweredByCastle7 ай бұрын
Thanks! We are sitting at 0 degrees at the moment, haven't had a cold snap like this in awhile!
@MatrixRC7 ай бұрын
Absolutely true. I’ve tested this and running cold or storage electronics without breaking them in will cause damage. Put it like this, running cold lipos and esc is like jumping out the bed after a long lovely sleep and immediately doing a full sprint run. 9 times out 10 you’re going to pull a hamstring or worse. You have to warm up your muscles and stretch your joints before trying to go all out. And if you ran track and field like I have you know what I mean.
@1bad67cat11 ай бұрын
I have a SW 8th in my Slash 4x4. It has full power in reverse, but not in drive. How do I fix it?
@kateoneil595511 ай бұрын
It sounds like the throttle channel is backwards. Watch the LEDs on the ESC when pulling the trigger. If red, reverse throttle channel on the transmitter, and then calibrate. If the wheels go the wrong way after you can either swap any 2 motor wires (because it's sensorless) or use a Castle Link to change the motor direction.
@danialirfan8847 Жыл бұрын
love this product. hope i will try soon
@czabatrans4420 Жыл бұрын
I need to go even slower and have full control with FOC, do you or will you have anything like that please?
@varmintsniper2551 Жыл бұрын
My SW4 esc died…then I put a SW3 in it and it’s got auto brake now. Not sure if I’ll keep using castle stuff anymore.
@zechariah3234 Жыл бұрын
Castle products are nothing but Chinese trash. Castle pays bottom dollar to have them made.
@ciscorsmith9867 Жыл бұрын
Thanks man, this was a life safer.
@RC-Analysis Жыл бұрын
Dear sir, The manual for the sidewinder 3 that Castle have on website to download only show 6 programable options. That manual is not correct, because it have 9 options in program mode, just like you show in your video. I thank you for your help, and please, if you could, tell castle manager to correct the manual on website, because are making clients think they esc is broken, because the order os the 6 options is not even same as the 9 option, so the cars will not have brake and other problems
@sTuPiDiScOoL_ Жыл бұрын
Are these good to put in wltoys 1/18 scale speed car on 2s and same for sg 1603 on 2s mate or they just for 1/10 crawlers thankyou
@tkoutdoors17 Жыл бұрын
Just got into the RC hobby and upgraded my esc and motor to Copperhead 10 and brushless motor combo. After researching I found that you guys are located in Olathe KS and I frequently deliver to Topeka and pick up loads from Kansas City and surrounding towns to come back to Idaho. Made me feel a bit of connection and I'm very happy to know these are made in USA! I went ahead and bought myself the Mamba X and brushless motor combo for my next build 👍 also you guys have excellent customer service. The gal that answered my phone call for an order update was extremely polite and helpful. Thanks guys!
@erynhamilton2193 Жыл бұрын
Been running mamba micro in my mimi 8ight since the original micro pro, just got my X2 with the external 10amp bec, she's a little tight in there, hope that gets sorted out for the smaller scale rigs. I Like that you guys finally acknowledged that it can indeed be run in a 3lbs 14th scale. By the way I love the x2 so far and she rips of course.
@davidchennellsjr.6799 Жыл бұрын
I want to put this in a Losi mini b and do 1/16 buggy racing. Will this be a good setup?
@redraider7614 Жыл бұрын
Working in here would be a dream job…
@tonyfresh1 Жыл бұрын
I just ordered the 2280kv to go with a sidewinder 4 esc I picked up real cheap are these motors good options for what I got aka a traxxas rustler 4x4?
@Gamer-ade Жыл бұрын
My ESC doesn't do any of this. So frustrating.
@floridabudgetbuilds41572 жыл бұрын
I have two of these. Extremely powerful. The only issue is on one the fan didn't work. Finally flashed new software with castle link and it began working after years. I've heard it's a common issue.
@ddrowdy76662 жыл бұрын
Do you guys have any power output data on your motors? I am looking for info about max sustained output at different rpm's, like a dyno curve....do you have any such data on your motors or just the nearly useless kv ratings?
@jono36452 жыл бұрын
Dear castle the leader in brushless preformance please just stop by hobbywing school. A place of peace, a place of quiet. No annoying screaming or screaching. Some say its the sound of power..... It is not. The sound you give is not the sound of power but the sound of 1000 crying deer thats being murdered by beers at christmas. When we are at a rock in the silence of the wild explane to me how is the sound of the castle product so pleasing.... to put things bluntly shhhhhh you are to loud
@Elfodsx2 жыл бұрын
Muito obrigado! Este vídeo é realmente muito útil! PARABÉNS PELO BOM CONTEÚDO! 👏👏👏👏
@10fantic2 жыл бұрын
Does this work for the talon series esc’s for helis?
@brsrc7592 жыл бұрын
I have a sidewinder SCT and the brakes aren't working. It just goes into instant reverse. If I'm already going in reverse it will just go into instant forward. There is no brakes