Has anyone noticed what they sell for in 2021? It's the ATV version of a 4th gen Supra. As if should be I guess.
@jag24743 жыл бұрын
Love the vid bro nice r! I got a video of the build process so far on my r on my channel
@FreeStyleProduction83 жыл бұрын
180$???
@PPGDV3 жыл бұрын
They were something like that. Looking at them after the video, one of the taillights chrome trim wasn’t covered all of the way. It was like that out of the box. I actually never realize it.
@prestonb60644 жыл бұрын
U dident even let this legend warm up u bitch how dare u
@schmidfarms17025 жыл бұрын
Great Video!
@TacoProd.5 жыл бұрын
Longlive250r
@danielkohler34585 жыл бұрын
Thanks for the post man. Great quad. Getting more expensive to keep em going though huh? Make sure you get a BOMB proof case saver. You'll remember this comment if you don't. Cases aren't cheap.
@PPGDV5 жыл бұрын
Daniel Kohler Hey man. Thanks. That was pretty much how I got it. One of my videos from Alaska might show the new setup. Pretty much all new and a UPP case saver was one of the pieces!
@250rtrxjunkie5 жыл бұрын
Nice🤗🤗💸
@gamernex98965 жыл бұрын
saludos desde veracruz,mexico
@1986Honda4trax6 жыл бұрын
U ever see anyone else ride up there in Alaska
@PPGDV6 жыл бұрын
William's Videos just out at Jim Creek. No 250R’s though. Unfortunately I’m not in Alaska anymore.
@nikdipetta6 жыл бұрын
Still loving the smart carb?
@PPGDV6 жыл бұрын
Nik D every time I ride. The thing is awesome.
@nikdipetta5 жыл бұрын
Welp. Having my BHP 363 built as we speak. I think I'm going to the 40mm smart carb though. Gonna let it breathe.
@250rtrxjunkie5 жыл бұрын
@@nikdipetta Lectron carb🍒
@nikdipetta5 жыл бұрын
@@250rtrxjunkie Are you saying the lectron is better? I haven't bought a carb yet so I'm open to suggestions.
@867diesel6 жыл бұрын
My number I raced with was and still is on my 250r but no longer race ..... Is number 7 . number 7 is a hunter a seeker of the truth . long live the king Honda trx 250r
@d-nice28666 жыл бұрын
Auto or manual
@PPGDV6 жыл бұрын
Daniel Day I don't want to be a smartass but watch the hands, listen to the engine, and most importantly, research this quad. It's a manual.
@1986Honda4trax6 жыл бұрын
To be more specific look at his left and pulling the clutch and when he does pull the clutch you can hear him shift
@JasonStaleyFitness5 жыл бұрын
Dumbest comment on youtube
@MrTylerjon19837 жыл бұрын
that thing is sweet!
@user-uu9up9cl2k7 жыл бұрын
You got a ratchet but how would you use it if you got no sockets humm
@PPGDV7 жыл бұрын
Mr RC a 250r only takes a few different sizes of sockets. I didn't have those in at the time. My current build has a majority of Allen key style ss bolts.
@ufocker13587 жыл бұрын
Worthless video
@kgroup63727 жыл бұрын
that thing screams!
@GaryntaraBurbank7 жыл бұрын
i use to climb up bigger hills then that big steep one you looked at an go down them on my 84 Honda 200s I have climbed ones that my cousin would not even try to climb up and he had a Honda 400ex around 1999 or 2000 I loved it because it never failed when I would reach the top I would be doing a wheelie my dad made so many trails we could ride for days we had 20 acres of land and my great aunt and uncle lived next door and they had even more property that butted up to ours and ran next to it because they had a beef cattle farm they just got rid of the last few cows when I was a kid and my great uncle turned 10 acres of land next to there house into a family cemetery my dad and I built the fence that is around it
@GaryntaraBurbank7 жыл бұрын
ours wasn't on a lake tho it was by the Kalamazoo river battle creek Michigan
@GaryntaraBurbank7 жыл бұрын
that is what some of the trails behind my house was like when I was a kid growing up with my manco dingo buggy my Honda 200s and my Yamaha DT175 enduro we had a group of us that rode every day
@danielkatairoak40157 жыл бұрын
Nice! I got a trx also and I'm in AK too.
@theragingslushy7 жыл бұрын
are 250r s good im just wondering cause i have a 250 ex and i was thinking about getting a 250r
@joshchelseaprasek63327 жыл бұрын
H2O SLUSHY 250Rs are awesome. Get on honda trx 250r owners for life Facebook page. All of your questions will be answered.
@theragingslushy7 жыл бұрын
hey thanks bro ill definetley check it out btw check out my channel because i have a few videos of me riding my 4 wheeler
@d-nice28666 жыл бұрын
What's the difference?
@justinsherman2826 жыл бұрын
Daniel Day 250 r is two stroke 250 ex is 4 stroke
@faissaljericho58438 жыл бұрын
what is the best pipe for the 250r? i think fmf?
@PPGDV8 жыл бұрын
My 363 I run an LED 350G raw pipe. The ESR TRX5 pipe wouldn't be enough for that motor. The LED is perfection.
@NorseHamr8 жыл бұрын
LRD Team B here. They're adjustable for low and high end power by lengthening or shortening the expansion chamber. I have yet to see a difference in adjust-ability, however my bore is stock. But its a good pipe if you seal it properly.
@subparguitar65268 жыл бұрын
My dad had a the same quad but with a CT 310 race kit
@373motomx28 жыл бұрын
nice job warming it up jackass
@PPGDV8 жыл бұрын
Noted. Now go be a keyboard warrior elsewhere
@373motomx28 жыл бұрын
+CJPrasek05 ok will do
@saggysunsacs45237 жыл бұрын
Roman Palombo 2 strokes don't need to warm up they don't have oil systems
@PrefabGrunt8 жыл бұрын
sounds lean to me
@derek_underwood3 жыл бұрын
Extremely!😵 That poor top end was just begging to give up. I genuinely thought it was gonna grenade....i legit cringed so many times in this video.😨
@kendalldouglas85778 жыл бұрын
how fast do you think a 2009 Honda trx 300x ATV go stock
@PPGDV8 жыл бұрын
I have no idea. I honestly wouldn't worry about your top speed if you aren't dragging or out at the dunes. Just get that acceleration locked in and you're good.
@kendalldouglas85778 жыл бұрын
Okay
@a.j.sgarage96377 жыл бұрын
Kendell Douglas if it's older than a 02 then 62 if it is after that then were talking 52-56
@TheStatuatoryApe7 жыл бұрын
55
@ToyAndBeyond8 жыл бұрын
What you think it pushes now? I remember 78 stock..? Im thinkin 85? 90?
@PPGDV8 жыл бұрын
I'm not really sure. The 344 put it up to 85 with 14/36 gears. I'm running 13/36 now. Not too concerned about the top speed, just wanna get there fast. I'll see when I return home in June. Curious to see how it'll pull on the top end.
@kylehelsel90438 жыл бұрын
what wrong with your camera mate
@danielkohler34588 жыл бұрын
That looks like soooo much fun. Man that things got some torque. Couldn't help but notice the "Precision" sticker on the bars... would you recommend that steering stabilizer? (I'm assuming you have it). I'm "eyeing" it, but at $480 for the base model I'd like an impartial recommendation.
@PPGDV8 жыл бұрын
Thanks. It does have some torque. I'm actually running a CCP stabilizer and like it. The precision I have is underneath the pad. I'm running shock and vibe clamps. Well worth every penny.
@claytonutley79368 жыл бұрын
that's Crosby tx? off bohimion hall?
@PPGDV8 жыл бұрын
+Clayton Utley Yes it is!
@claytonutley79368 жыл бұрын
+CJPrasek05 damn that's what's up I used to live out there now if off old 90 in sheldon
@PPGDV8 жыл бұрын
+Clayton Utley Yeah, that's my parents place. Now I'm in Alaska (military). Rebuilt that quad tremendously. The latest, but crappy ride video, has me on the 363.
@claytonutley79368 жыл бұрын
Oh nice what branch?
@anthonydesimone9748 жыл бұрын
How do you like the SMART carb? I have almost the same engine (in a three wheeler) and am seriously considering it...
@PPGDV8 жыл бұрын
I love the smart carb. I have a buddy who has the same setup and told me to order it with a different metering rod. That controls mid-high. All I do for idle-mid is kill the motor, pin the throttle, push down on the clicker on top of the carb and turn (right to richen, left to lean). Adjust idle as needed. Literally no tools needed. I love the thing. No loading up either.
@MrJones-ue2tw8 жыл бұрын
im guessing you decided to keep your R and not part it out
@PPGDV8 жыл бұрын
No parting out at all. Don't know if I ever even mentioned parting it out though.
@lorenzosettipane9238 жыл бұрын
What type is better Honda trx450r 2016 or Yamaha YFZ 450r SE 2015-16
@PPGDV8 жыл бұрын
I honestly don't run four strokes. I have a yfz engine to go in an 88 frame but that project is on hold
@TheStatuatoryApe7 жыл бұрын
Honda 450R. Better acceleration. YFZ might have a slightly higher top speed at 78, I got 75 out of my 450R stock.
@yungjquan4186 жыл бұрын
TheStatuatoryApe What?🙊Better acceleration? Dude we are talking about a YFZ vs 450r🤦🏽♂️Both different machines but have similarities! The YFZ has a higher top speed, Higher acceleration and better handling in both MX and trail riding! The YFZ is better in every aspect to be honest😒the 450r is just a heavy lump of metal.
@lorenzosettipane9238 жыл бұрын
And what year is it
@PPGDV8 жыл бұрын
This one is an 86
@lorenzosettipane9238 жыл бұрын
Is that stock
@PPGDV8 жыл бұрын
The only thing done to it in this video is the fmf fatty pipe and maier plastics. Right now it is fully modded and tomorrow I'll be doing another run to break in my 363 engine
@FPS360VIDZ8 жыл бұрын
sounds like shit
@PPGDV8 жыл бұрын
In the beginning it is slightly cold. Past that, the sound is perfect. Keep screwing with your valves though
@PPGDV8 жыл бұрын
Have some tweaking to do on the bike and then I can start tackling my break in cycles; that's once the weather warms up some.
@PPGDV8 жыл бұрын
The 363 is built, got a new pipe, and a 38mm smartcarb is on its way.
@gearhead19958 жыл бұрын
250r great quad got an 86 completely redone nothing too crazy done to it had it up to top speed or at least close not sure how fast tho i traded an 05 trx450 for it and like the 250 much better they handle damn near the same ill probly never sell it haha
@riproarin450r88 жыл бұрын
Yeah but what would you rather have, nice deep manly tone from the 4 stroke or a mosquito from the 2 stroke?
@scottywilson16478 жыл бұрын
Did I see this at power line park
@PPGDV8 жыл бұрын
I'm not sure where power line park is. It's been out of Kansas since August 2014. Now in Alaska and has a whole new motor and pipe.
@tizzietwoshwz27478 жыл бұрын
NICE 250R
@rocko10ish9 жыл бұрын
By FAAAAR the most legendary!!!!!!!!! Nothing touches it almost 30 years later.
@christopherwalker82405 жыл бұрын
Sean N. It is a great quad but I think the Tecate 4 touches it. 😉
@prestonb60644 жыл бұрын
Love u
@jag24743 жыл бұрын
The quadzilla doesn’t touch it?
@williamquagliana6909 жыл бұрын
Sweet!!!
@IowaTRX9 жыл бұрын
Music to my ears!
@2strokeorchoke4969 жыл бұрын
Cool trx250r vid one of my favs clean bike though man I bet the andonzing cost you an arm and a leg but I'm building my first trx250r right now trying to make up my mind on geting the oversized kits with the cylinder and all that but I'm not sure because stock there pretty good but you said you fixed it it was an exhaust leak but when I was watching you didn't have much of an exploding powerband like was that because it was broke like when you went in the first couple of turn it's seemed like it wasn't breathing and didn't really hit the pipe was it just the exhaust? And would you recommend the kit you have on yours over stock?
@PPGDV9 жыл бұрын
I'm really wondering what causes people to thumbs down this video. At least im posting a video of the most legendary quad.
@dustinlambert90228 жыл бұрын
Nice , I just got a 87' Honda 250 fourtra, the sporty version. It has a twist throttle with a DC exhaust that's loud as he'll, ive pissed my neighbor's off already, they've already called the cops lol
@PPGDV8 жыл бұрын
+Dustin Lambert, welcome to the R family. I would highly suggest getting a thumb throttle if you plan on doing any technical riding. Having to get off to the side while hitting bumps or ruts could cause you to get into the throttle some Btw, I've got a 363 being built for this. It's under a whole rebuild but will be recorded once the winter is over (Living in Alaska) and I get it broken in.
@dustinlambert90228 жыл бұрын
Ok cool I will definitely check that out rebuilding mine too
@PPGDV8 жыл бұрын
+Dustin Lambert, if you aren't part of our FB page, then join trx250r owners for life. Just let them know you have an R. Lots of knowledge and parts on the page.
@dustinlambert90228 жыл бұрын
CJPrasek05 will do, do you have an instagram too? Or is that what your talking bout
@himhohong25869 жыл бұрын
I know exactly out where you are.. I'm in Dayton. You ever take that bad boy to the track in Highlands or DSO?
@PPGDV9 жыл бұрын
No I haven't. I'm from crosby but im military and was stationed in kansas at the time. Since then I did a huge rebuild but I'm currently down because my crank blew up. Now it's ripped apart and getting a gusset kit and other stuff and then I'll powder it again. Back to the track, it's not for atvs. The riding area under Hwy 90 is the type of riding that I grew up with. Now I'm in alaska and due to deploy again soon. So, I'll be doing 450r rear brake and 400ex spindles with 88/89 hubs with yfz calipers. Currently im installing Rock nerfs from a yfz and getting my rear shock rebuilt. Making an aluminum airbox and radiator shrouds as well.
@himhohong25869 жыл бұрын
Are you sure? I'm pretty positive they have special track days for ATVs.. When I had my Trx450R I was going to take it but didn't have anyway to get it over there.
@justinojackson198410 жыл бұрын
hey are you running the esr porting on the 344 or did you send it off to get custom porting?
@PPGDV10 жыл бұрын
Hey man. This one slipped by. I'm just running some standard low-mid porting. I've since bored it out. It's now a 353 and I haven't checked the compression due to a move. It was at 205 but my builder in NC said he was going to tinker with it. Now I live in Alaska and I'm starting to try and get some MX time but the weather is about to shut down any riding possible.
@drizziog49210 жыл бұрын
im looking to get a 250r i had one before and my friend crashed it there is no fixing it so what year model should i get im looking at an 86
@PPGDV10 жыл бұрын
Check out my other videos. You'll see what I've done to it since this one. If you're just joy riding and don't care about the way it performs go with the 86. Mine is the 86. The best for jumping is the 88 and 89. The swingarm is an inch shorter and the a arms are an inch forward. There are a few other things different between the years but this is the biggest concern with them. If you do the 86 you could do just like I did with my build of this one, buy +1 forward arms and an inch shorter swingarm. I've done quite more than that but that puts me with the same weight distribution as the 88/89. For a lot more info, parts for sale and awesome R fanatics, visit/join www.trx250r.org. The site is great.