Bill

Пікірлер

@colonelaldorain 15 сағат бұрын

Хуйни наделал...

@MimicoBungalow 25 күн бұрын

what do you need is needle nose ice grips and nice pair of 10 inch ones and you could've gotten all that crud out of the pipe

@MimicoBungalow 25 күн бұрын

VICE not ice!!!

@RonnieThebrush-ci8kd Ай бұрын

Just talked me out of doing this.. 😅

@Freerangedessertliving 2 ай бұрын

Nice man hope all is well. We are doing the opposite of you!- seattle to Tucson! (Work/school). I know this is a year later but I appreciated watching this from your perspective. Cheers

@matthewwesterman5337 2 ай бұрын

Thanks for the video. Where did you buy the filter and what kind is it?

@itsmers 2 ай бұрын

Dude. I would have spraid the chain under the bike, just infront on the rear wheel. So you dont mess up the rear rotor and break

@billh1337 2 ай бұрын

@@itsmers good point. I’ll do this for the future. Thanks for the tip.

@williamhentig4003 2 ай бұрын

Great video!

@lawrencemao6519 2 ай бұрын

First

@robertkennedy1666 2 ай бұрын

Just bought an 07 for 300 had to replace clutch. Waiting for gasket sealer to dry 24 hours. Baffles are out, has a easy access oil filter kit.. what mods can I get for it to make it faster.. is it fast enough to be exciting?

@billh1337 2 ай бұрын

@@robertkennedy1666 if it’s a 1100 like I had it will be plenty fast. Could cruise at 90+ mph easily

@andrewschell-x6g 3 ай бұрын

Sounds like shite and what a terrible job

@andrewschell-x6g 3 ай бұрын

Sounds like shite and what a terrible job

@andrewschell-x6g 3 ай бұрын

Sounds like shite and what a terrible job

@bogdan1887 3 ай бұрын

Does the filter need to be oiled?

@billh1337 3 ай бұрын

@@bogdan1887 no it’s not necessary to oil or lubricate the air filter. If you would you could put a tiny bit but again, not necessary

@poseidon5003 4 ай бұрын

I bet it's stupid loud now.

@centralcal6604 5 ай бұрын

Thanks

@davidjoaquin141 5 ай бұрын

Nice!! Good cacth on the direction.

@magnuspym 5 ай бұрын

you left the screw on tip on.

@davidjoaquin141 5 ай бұрын

Nice job. Thank you.

@sethdesplinter1851 7 ай бұрын

Thanks for the vid. Beautiful bike

@IvanRodriguez-lb2ki 7 ай бұрын

This guy is serious about SafTy.

@IvanRodriguez-lb2ki 7 ай бұрын

Someone call the cops

@IvanRodriguez-lb2ki 7 ай бұрын

Is he wearing lady shorts?

@IvanRodriguez-lb2ki 7 ай бұрын

Damn his gf is busted

@joshuahowland4732 8 ай бұрын

What shoud the spark look like

@wenjuanzhang5253 9 ай бұрын

Can you please recommend some places to stay for summer internship? Thank you!

@billh1337 9 ай бұрын

Sure. I personally stayed at Sidney Apartments in Belltown. They offered 3 month leases for a bit more per month.

@nastysoda9212 9 ай бұрын

that's an awesome tool set.

@jezuaccc 9 ай бұрын

All good I just bought an 2009

@Swakke36ST 10 ай бұрын

killsswitch is not the best way to stop the engine ...

@russellpeters21 6 ай бұрын

Care to elaborate?

@Holgrinator 11 ай бұрын

If that filter cleaner and oil doesn’t specifically state “for foam filters” I wouldn’t use it. Cleaners not designed for foam can disintegrate the foam and eat the seam glue. Also K&N is pure trash in the off-road world. You couldn’t pay me to run it again.

@Thatguy37-s1t 4 ай бұрын

Actually

@broughtonparkade5381 Жыл бұрын

Damaged exhaust. Just buy a couple of tips and leave the stock- and irreplaceable- the way it was designed.

@ronnjonn8580 Жыл бұрын

HACK

@Gizmus1984 Жыл бұрын

😃👍👋

@davidday4443 Жыл бұрын

change your jets watch for bluing in your pipes best to purchase an exhaust system to satisfy your what it is you are looking for

@05Miketyson Жыл бұрын

someone has some experience with a Royal Star 1300 96 ? It has 4 exhausts. Does it work the same? Hole saw, drill it out and pull the baffles out? Thank you guys

@jettfindley2444 Жыл бұрын

Thank you so much!

@lance7413 Жыл бұрын

What about the overflow bottle under the seat?

@williamhentig4003 Жыл бұрын

Nice video Bill. Clear explanation and footage.

@billh1337 Жыл бұрын

Thanks dad :)

@stoic9701 Жыл бұрын

clear and easy to follow, thank you. You mentioned there were performance issues you had with the old one. What were the issues and did changing out the filter help?

@billh1337 Жыл бұрын

No problem I appreciate the kind words. As for the performance issues, turns out that my carburetor filter was clogged (the tiny filter letting gas into the carb). I bought a carb clean kit and replaced it and this cleaned the bikes bogging issues up right away. I think that changing the main fuel filter was good to do tho as it was very old.

@stoic9701 Жыл бұрын

@@billh1337 awesome, glad you got it figured out. I'm having similar issues so I'll move on to the carburetor next after the fuel filter. Thanks again!

@DonaldErkelens-fi7gi Жыл бұрын

I think that motor was mssing

@billh1337 Жыл бұрын

haha what do you mean?? Not loud enough for ya? Lol

@MrChrisConnors Жыл бұрын

Can't locate the fuel filter on the 2008 vstar 1300. Anyone know if it exists?

@waldooutdoors4636 Жыл бұрын

You have to remove them by taking the exhaust off they come out towards the front of the exhaust it’s not like a Harley where you can just pull them out

@kristykehr5754 Жыл бұрын

Hack job , dont do this

@billh1337 Жыл бұрын

Yea it does look that way a bit. But hey I tried my luck didnt pan out tho. Learned a lesson lol

@yungBitta291 Жыл бұрын

Hit it with your purse 😂jfwy

@billh1337 Жыл бұрын

😆 lol ill keep that one in mind for next time

@yungBitta291 Жыл бұрын

Did you split the pipe and knock them out or wack the tip of the pipe

@yungBitta291 Жыл бұрын

If you cut the tips make sure you angle cut it \ …\ that way it looks good not a straight chop I’m sure I’ll be uploading this clapped vstar 650 custom I’m be doing into a bar hopper style chopper and I’ll be buying someone’s stock 1100 pipes bc these pipes on it now are aftermarket China garbage tiny pipes and have a heat shield on them to make it appear there fat pipes sounds like a 50cc dirtbike on steroids and that ain’t going to cut it

@user-my5nr3il3q Жыл бұрын

Lmao the man just learned the snap transition I'm dead

@billh1337 Жыл бұрын

🤣 hey man what can i say i am behind the times i guess lol

@bobbywillamson3117 Жыл бұрын

To each his on. I'm 64 yrs. old and been riding many different bikes since I was a small boy. I just bought a 2008 Yamaha 1100 v star with stock exhaust. I love it. Quiet and smooth. That's the way I like it. To old for the noise anymore.

@billh1337 Жыл бұрын

I totally get that and understand it. Each his own. It is a nice ride for sure hope you enjoy her.

@MultiMoose007 Жыл бұрын

I removed mine. Same year bike, same motor, same color! Yes, if you adjust the fuel mixture a little, it will be fine. All the bikes, that I have owned, I remove the baffles. No problems.

@billh1337 Жыл бұрын

Really? You didnt have issues like mine how they are loose in there but stuck with some kind of flange holding them in? Good to hear it went well with yours. Are you in a different country perhaps where they might have built them slightly differently??

@ethanh1701 Жыл бұрын

@@billh1337 if your bike is from California it has a different muffler with catalytic converter systems in them

@billh1337 Жыл бұрын

@@ethanh1701 It may very well have been. I am in Arizona so only one state away. Being the third owner could be likely.

@ethanh1701 Жыл бұрын

@@billh1337 well that right there is a damn good observation by me😂 it probably is. If you haven’t gotten them out already I would suggest just getting new aftermarket pipes. The layout of those mufflers is way different than the usual and causes issues with removing that baffle

@davidbalogh3845 Жыл бұрын

When you remove the rearmost baffle you don't change much. Of course the result is somewhat less backpressure but it's not going to ruin the engine if the carburetor is tuned accordingly. If one puts on a set of eg. Cobra pipes the backpressure changes a lot more drastically compared to this modification, hence the jet kit Cobra also sells. If you experience symptoms like backfiring during engine braking or slight hesitation at low throttle adjust your pilot mixture screws on the carbs. Usually 1/4-1/2 turn counterclockwise will richen the mixture to compensate for this. For more info Google "Vstar Knowledge Base" and look for Carb jetting in the Tuning menu for detailed, model specific explanation and additonal tips.

@billh1337 Жыл бұрын

Thanks for the info. Good to know how to properly tune your carb for sure.

@josephdarling7558 Жыл бұрын

How did you get them to come out all the way?

@billh1337 Жыл бұрын

This year model is a B. But I was going to have to cut the center of the exhaust and was going to have to look inside and see if you could either bend the metal flanges flat or remove it from the other end. After that weld back the cut open metal. I never got the chance too as someone had seen the bike and offered money as she was so I took it.

@kileighjohnston2525 Жыл бұрын

How did you end up getting them out? I see in your newer videos you still have the stock exhaust, I'm trying to do mine and have them half way out like you do here.

@billh1337 Жыл бұрын

Hey so I ended up selling the bike before I could do anything to it. But I was going to have to cut the center of the exhaust and was going to have to look inside and see if you could either bend the metal flanges flat or remove it from the other end. After that weld back the cut open metal. Really bad design on the newer year models. I wish it was easy as all the older models.

@COORTEGA-c6v Жыл бұрын

Removal of baffles is just a slow death to that motor... No back pressure equals the motor not getting enough cooling!!

@billh1337 Жыл бұрын

Mmm interesting, I did not know this. I do notice more backfiring as a result of it. Thanks for letting me know.

@derfskittlers6125 Жыл бұрын

You'll have to change the air intake as well.

Ең жақсы KZbin

Пікірлер