3 ай бұрын
Пікірлер
@damienaspros Күн бұрын
Hi, I'm just finishing up my cruiser and was wondering if you knew of anyone who might have the same seats as these avaliable, its the last large item I've got to track down to finish her off. cheers
@40ChannelCruiser Күн бұрын
@damienaspros Hey mate, I had these custom made by scottslandcruisers. On instagram.
@Golden-69 Күн бұрын
Rob is down to earth guy. I have wheel with him at SCC
@fj40guy 5 күн бұрын
What tires are mounted on this 40?
@geraldvaniwaarden4632 6 күн бұрын
Enjoy the channel. My FJ40 is LHD from 1978 and I live in Utah. The previous owner installed a skylight, but I would like to know the source for the roof skylight you have on the beige FJ40.
@40ChannelCruiser 5 күн бұрын
Hi mate, thanks for your support of the Channel. Unfortunately, the skylight company that made the skylight in my roof is no longer in business. Feel free to email some photos of your cruiser. [email protected]
@geraldvaniwaarden4632 5 күн бұрын
@@40ChannelCruiser Thanks for getting back to me so quick. I will try and fine one to replace my leaky one or fill in the hole like it was stock.
@eagleeyeswings2863 7 күн бұрын
Is it necessary and mandatory to prime the oil pump before starting the rebuilt engine?
@40ChannelCruiser 7 күн бұрын
@eagleeyeswings2863 yes to ensure you have all the oil galleries in the correct position and oil is getting to the rockers.
@eagleeyeswings2863 6 күн бұрын
@@40ChannelCruiser ok and according to you sir, if the pump is not primed, could this cause damage to the crank shaft and the rod and main bearing?
@40ChannelCruiser 6 күн бұрын
@eagleeyeswings2863 it's more to ensure that oil is running through the correct galleries, so that you don't damage anything on start up.
@eagleeyeswings2863 6 күн бұрын
@@40ChannelCruiser ok
@scottpettie 7 күн бұрын
Have you put a sway bar in your FJ40? I have a FJ40 that I just purchased, it came with a 70 series front suspension. This means coils and shocks instead of leaf springs. I am looking for a factory sway bar option. For front or rear, both would be overkill on a FJ40.... but I would do it if it is available and easy and not expensive to obtain. :-)
@40ChannelCruiser 7 күн бұрын
@scottpettie Hi mate, no haven't put a sway bar on a FJ40. But would be interesting to see how it would perform.
@colindoolan4690 7 күн бұрын
Did you buy the covers made up or have them made ? Thanks
@40ChannelCruiser 7 күн бұрын
@colindoolan4690 I had them custom made.
@kierranmackenzie7997 10 күн бұрын
Yeah I noticed that when I first got it, it’s Fj40 and it says Diesel on the grill
@40ChannelCruiser 10 күн бұрын
@kierranmackenzie7997 yes, it was the first thing I said to the person behind the counter. I said the description of the vehicle doesn't meet the model. 🤣
@framolon3708 10 күн бұрын
Where is it available?
@40ChannelCruiser 10 күн бұрын
@framolon3708 daughter brought from Repco.
@framolon3708 10 күн бұрын
@@40ChannelCruiser Try to find here in Italy...but doubt it! Thank you!
@40ChannelCruiser 10 күн бұрын
@framolon3708 they may have a web page. Make sure you enter the Instagram comp for the shirt.
@framolon3708 10 күн бұрын
@@40ChannelCruiser I will...but nothing so far!
@deanconacher3578 12 күн бұрын
Fj40 with diesel on the grill, nice bit of kit!
@40ChannelCruiser 10 күн бұрын
@@deanconacher3578 yep, you picked it.
@BeigeBus 12 күн бұрын
It’s an FJ40 with a diesel grille badge. FJ is a petrol 👍🏽
@40ChannelCruiser 10 күн бұрын
@@BeigeBus Spot on mate.
@donnareed3822 12 күн бұрын
Happy New year to you and your family
@Jakethemuss35 12 күн бұрын
Your attention to detail is amazing mate, watching every episode from NZ 🇳🇿
@40ChannelCruiser 12 күн бұрын
@Jakethemuss35 Thank mate, what cruiser to you have in NZ?
@DrunkenAussieAdventures 12 күн бұрын
you should be useing blue loctight not red
@Golden-69 12 күн бұрын
There is no gas in it😅
@Rob-r2s 12 күн бұрын
The side of the hood isn't correct.
@MrlandcruiserG 12 күн бұрын
Grate video man thanks I wish I get one shirt thanks again
@ahmadenwagei4267 18 күн бұрын
Cool. Big greeting from libya. Just wondering for mirrors is it for jeep ?
@40ChannelCruiser 17 күн бұрын
@@ahmadenwagei4267 G'day mate, when I first found these mirrors online, they were advertised as off-road mirrors, but yes, I have since found out they are for a Jeep, but I'm pretty happy with them for the moment.
@ahmadenwagei4267 16 күн бұрын
@40ChannelCruiser Thank you, mate
@jeffh676 18 күн бұрын
I have a roof top tent on my 40 on a gutter mount rack. Only 4 points of contact. Been on for several years and lots of off-road with no issues.
@40ChannelCruiser 16 күн бұрын
@jeffh676 great to hear, thanks for sharing and confirming the stories I have heard.
@ROBERTRICHDALE 21 күн бұрын
I have a few Bluetti units AC 200P, AC200L, AC70, EB3A, I also have the 350-w solar panel. I can say not so very impressed with the with the Eb3a. But the AC70 I'm very happy with it I find that to be the happy medium if you're going off grid for a night or 2 its very portable run a fridge a diesel heater charges up phone or tablet put the 350w solar on it charges up fast with good sun. It's a good grab and go power bank.
@papa54321 23 күн бұрын
You located your Charger 1 at the worse place and just under the hole in your window seal. This is where moisture will leaks straight on it. I beleive you located somewhere else after you realized this..
@petersmith2544 23 күн бұрын
Nice awning all I need is the cruiser
@Rob-r2s 24 күн бұрын
How many FJ40's and FJ45's do you have?
@40ChannelCruiser 23 күн бұрын
@Rob-r2s 5, but only one is running atm
@Rob-r2s 23 күн бұрын
@@40ChannelCruiser Good. Now I know that your KZbin channel will be around for a while.
@merinofarmeragriculturewor4623 24 күн бұрын
First comment merry Christmas & new year Jason & your family 🍻🍻🩵💚❤️🩷💜💙🩵🇦🇺👍
@40ChannelCruiser 23 күн бұрын
Thanks mate, Merry Christmas and a Happy New Year to you as well! Thanks for the support!
@Jason-cx1gi 25 күн бұрын
Sam is looking great mate. You and Aliah should be proud.
@jimbob9102 26 күн бұрын
Hi, doing same to mine with h55f 75 series box was wondering about transfer gear stick weather to bend it or do what you bid cut and weld did that make it come though original hole to get it away from handbrake, thanks for your time .
@40ChannelCruiser 25 күн бұрын
@@jimbob9102 I don't think you would be able to bent it as much as you need to with the stick being very short.
@kenwhite9223 26 күн бұрын
Sam is looking good mate. Good to see Aliha (Hope I spelt that correct) getting involved. When is the LX going to get started on and how's Jacks truck going.
@40ChannelCruiser 26 күн бұрын
@kenwhite9223 Thanks mate, yes Aliyah has been very involved in this build and is very keen to get it finished. Jack truck will get focus before the LX.
@Rob-r2s 26 күн бұрын
I'm waiting to restore my 64 FJ40 because I don't have a shop yet. I'll most likely be breaking ground on my shop in July I think but that depends on the economy. Then I'm going to restore it. Love what you do. You've taught me a lot and you make it look easy. I've never restored a vehicle before or have really worked on one before. I'm a carpenter but now I'm keen on getting my Toyota up and running and think that I can do it after watching your videos. Could you put together a list of all the parts that you have installed on it rather than me going back over all the videos again? My FJ40 hasn't run in like 20 years. It's all original and everything needs to be gone through like yours. I'll be building my shop all by myself and without hired help to keep the cost down. It will be a post frame construction like RR Buildings dream shop build on KZbin.
@40ChannelCruiser 25 күн бұрын
@Rob-r2s G'day Rob. Thank you so much for your kind words, and it's fantastic to hear that the channel is helping people like yourself to take on awesome projects and bring old Landcruisers back to life. I think it would be a good idea to do a video on parts used and where I was able to acquire them so that everyone can benefit, as you are not the first to ask this question. Thanks for the idea. Where are you located?
@Rob-r2s 25 күн бұрын
@@40ChannelCruiser I live in Washington state, USA. I'm out in the country away from the city. Yes, a video with a printed list of where I can get those parts would be really good. I need the carburetor and that metal curved hose that goes to the radiator as well as many other parts that you've mentioned. Maybe you could post that list that we can print out at the bottom of each video for each vehicle you've worked on and you could always add to that list as a running total of parts or something like that. That way when I'm ready to finally restore my ride, it will be a supper easy reference. If you did a video about it than it would be just another video and would be difficult to find.
@AdelaideInvigilation 26 күн бұрын
So with the dials out why didnt you add markers on the speedo for KMH? Surely there is a stick on decal for that?
@40ChannelCruiser 25 күн бұрын
@AdelaideInvigilation I wanted to keep an original look. This will not be a daily driver. But it would be a great idea, you could swap for a later speedo or yes you can buy decals from the States.
@quinterofelixchidez 29 күн бұрын
Swamcooler dry gas microwave test
@quinterofelixchidez 29 күн бұрын
DeWalt top table saw review miter combo if avaloble
@40ChannelCruiser 25 күн бұрын
@quinterofelixchidez I'm not really a wood guy, but when we get to building the tray we will be using wood.
@brucemacneil 29 күн бұрын
Which Bluetti is weather resistant?
@davidholzgrefe7298 Ай бұрын
Question , does this unit stop once aux tank is empty ? What stops pump from burning out ?
@bryannanna380 Ай бұрын
Do you have a video on how to adjust the timing after converting? Do you have to pull the distributor?
@eagleeyeswings2863 Ай бұрын
👍
@davidleggitt4687 Ай бұрын
Does the app cost $$$$ to use?
@glynotglen1098 Ай бұрын
So lovely to see a dad with such a great connection with his kids on these projects. Well done.
@40ChannelCruiser 25 күн бұрын
@glynotglen1098 Thank you, it is a real blessing to be able to share the builds with the kids!
@dadstoygarage1878 Ай бұрын
very nice! she is going to have a sweet old Toyota. after my 40 series build I would love to build a patina 45 series.
@40ChannelCruiser 25 күн бұрын
@dadstoygarage1878 Yep she sure is! I am really loving the Patina look too!
@DB-lm1nj Ай бұрын
You two are getting there! I love the that you are keeping the patina look on the outside while cleaning up the inside.
@40ChannelCruiser 25 күн бұрын
@DB-lm1nj Yes it is starting to look like a FJ45 again. It is getting very exciting now! But still it's all the small things that will take the time.
@georgefromiami Ай бұрын
Hey Jayson, George from Miami here, you are always up for the good causes, I been following you since long time but never write, I like the energy that you put into the videos, I like also the family vibes, great work man, also I recently purchase a FJ40 that is in great mechanical condition but might need some rust repairs, currently I am driving it but the day I stop and start striping will pass years before is drivable again, I will again watch the first videos all over again, where can buy a shirt and sticker from your channel?, thanks
@iliantosahadi9613 Ай бұрын
Tank.s bro
@rockbiterhd Ай бұрын
please tell me you guy are going to paint this great work
@DaveFraser-o5p Ай бұрын
Great video, love the dog’s patience waiting for the ball to be kicked.
@40ChannelCruiser Ай бұрын
Thanks Dave, Yes🐶 She is very patience, she will wait and follow you around the shed for the whole day with her ball.
@Rustythe40 Ай бұрын
Nice work Jason and Ali…I’m super excited to see it come together.
@40ChannelCruiser Ай бұрын
We are excited to see it get to this point too, chasing the last part up now.
@merinofarmeragriculturewor4623 Ай бұрын
Awesome as Jason great work you are doing 🇦🇺🍻
@40ChannelCruiser Ай бұрын
Cheers mate, I appreciate the support! Flick me an email [email protected] I would like to send you a sticker for your support and always getting in and sending us a comment.
@MH-re3kb Ай бұрын
Wow that front end looks soooo good. I am always amazed how far you got with the build...
@40ChannelCruiser Ай бұрын
Yep, we are stocked at well it has turned out too, it is a hard balance to get the Old and New look to work.
@ryanphotostudio Ай бұрын
Awesome guys! That is gonna be one cool Ute for Alia to cruise in, lucky girl 😊
@40ChannelCruiser Ай бұрын
Thanks, yes Ali is very keen to take it for a drive!
@FirstLightAdv Ай бұрын
Thank you
@40ChannelCruiser Ай бұрын
@@FirstLightAdv you are welcome. Hope it helped.
@brianfox3020 Ай бұрын
Rare as, plus wearing a 40 Channel t-shirt
@40ChannelCruiser Ай бұрын
@@brianfox3020 hopefully we can get the 40 Channel Merch out and about so they don't become as rare!
@davidhinchliffe6464 Ай бұрын
Great rig Oz and top video Jayson
@40ChannelCruiser Ай бұрын
@@davidhinchliffe6464 sure is mate, thank you.
@SquiffyVision Ай бұрын
Thanks David 👍