Ah, got it to work myself 😅 drive.google.com/file/d/1RX9Ravdui8136SgbyfVceMHx5grTzAEE/view?usp=drive_link, drive.google.com/file/d/1XCjKLslfjBryC_M4C8CglK_24mSYDiUD/view?usp=drive_link

How do I recreate this drive.google.com/file/d/1zQAA30shA_4ghpOac_FqZ82b_2TdVM1g/view?usp=drive_link in Solidworks?

Hi, I have a round plate that is bended. No flat face or straight line to select for Fold. What then?

very helpful thanks

Great Video. Thanks.

simple but useful vid. I had no idea that you could customize the shortcuts.

Making the customised thread was not easy at first but this helped a lot. Thanks

Really helpful, thank you!

Thank you

This is FANTASTIC! Just what I've been looking for. Must I manually add the DESCRIPTION LENGTH details into the properties for it to show in my cutlist?

This sucks if you want to change the size of the ball, and then you have to adjust the offset surface again as well. Wish it was easier to slide something along a surface

It is anyway to downscale, sketch or solid models

This is a great video: a.) use [surface fill] but a few things before that: b.) Add surfaces to edges that border the geometry. Crating a normal to surface capability. c.) Click off "optimize" because optimize=boundary surface setting(internal calc method imbedded in the option)

If you click a face and right click you can save DXFs normal to the face you selected. Few less clicks than the save as method but still immediately opens the "save as" dialog box, so the rest of the steps are the same.

Thanks!!

You are the best, i am trying for days to find a video like that, and now i solved my problem, Thanks really a lot.

Is there any way to scale in only one direction?

how do this in assemblies?

Thank you thank you saved my homework assignment

this option doesn't appear on mine. can't save as .dxf doesn't appear in the drop down..

hi, Is there a way to fix the surface mesh like in Zbrush that you can retopologize the geometry to make it smoother? thank you

Saving Dxf's for laser cutting with kerf compensation. My current workflow is: *Make new sketch on part's face. *Convert entities (all edges u need out and inward) *Offset entities with your kerf value (make construction base geometry) *Select construction geometry and delete. *Hide main Boss Extrude (so it does not show on dxf file as additional edges) *Save as dxf. *Show main Boss Extrude *Hide sketch with offset edges so it does not show on your assemblies. Cypcut is great for nesting btw, just open new file, go nesting and "add parts"(use your dxf;s) make the nesting as required and copy the results to Primary Doc and save as dxf. Cypcut can coedge your parts if needed to minimize laser time. Cypcut does compensations pretty well by itself but only in lxds format, compensations wont save as dxf files. I wonder if there is a better way.

So, can this be used in a pattern? i wanted to try and make a cool spout for a sink, say 6 of these all twisting together but not connecting except for the base and the actual spout. Seems if you try this with different two plus arcs the points where they connect seem to mess things up a bit. Great video though this helped a bunch!

This is great

See knurling on solidworks kzbin.info/www/bejne/oKu5p2yGZ5d6nbM

Looks like Bob gave up making burgers for engineering.

is there a macro for "save as dxf" with one click? I am making tons of dxf files and clickin save as then selecting dxf is like a torture

Thanks mr,but can i know how to add the column on the middle of the right side? Im losed it once and dont know to add it back?

"For all intents AND purposes," man. "For all intents AND purposes." Not "for all intensive purposes."

Thanks

thank you so much bro that works well

Almost ten years later and this video is still helping engineering students. Hats off my friend.

great job

Hi, I am facing problem in equation when I go to change my equations, they dont update the part and rebuild. I have checked the automaticly rebuild box but they still don't change in the model, as shown by the same mass properties.

thanks you create a form on a planer face but how we can create it on a round face for exaple a steel pipe

Thanks for the tip!

You are da man

The revolve from the thread ends is how you want to do it. However in solidworks the end faces are not normal to the trajectory. They are normal to your standard planes. This causes the rotated thread end to not follow the thread. Pro-e has a button you can click to make the faces normal to your helix angle trajectory. I’ve not yet found how to do that in SWorks.

there is no DXF option when i go to save as

this is sick cool work

I'm having my holes in my plate dissapear when exported to DXF.

hey my toolbar section on the right disappeared how do i get it back?

Hi. Good video. Apparently circular sweep gives a different result for the spring body mass and the circle sketch also gives a different result, same material and same diameter applied. These two methods don't yield the same result. What is your suggestion for the CSWE, as there won't be any multiple choice

tHANKS!

Thanks a lot sir 👍👌🙏❤️🔥😎👌

Thank you

Nicely done. If you wanted to depict a sphere a toroid (steel ball and o-ring seal) in contact with each other using a mate in SWX 2020, shouldn't it be as simple as choosing surface of each and assigning a tangent relationship? There've been some usage features added since the version you are using. But, try as I may, I'm unable to make that happen. I have their axes aligned coincidently. I was really hoping for a homerun. Didn't happen. Advice?

thank you so much!!!!!

Is the last part only for 2018+?