I'm thinking of getting the Connector Wire, Has it burnt out because reviews are saying it burns out in the 2 week range.
@GlocksNCrcos27 күн бұрын
Did it cause any noise? I have oil leak but also sounds like HB is making a “knock” its not rod knock tho
@nicolasmerino1915Ай бұрын
On the Amazon link you posted for the female adaptors is that the right length or do you have to buy more wire?
@thawkproductions4248Ай бұрын
@@nicolasmerino1915 the leads are only 6" You'll need more wire
@nicolasmerino1915Ай бұрын
@@thawkproductions4248 thank you
@imagymdad2Ай бұрын
Great video!! Thanks much. Just installed these today and we got them somewhat adjusted but I will do this tomorrow and get them perfect.
@rogeraverill8989Ай бұрын
What are you saying you don’t have to run any wires to that new switch that goes in the dash just the way it was already plugged into it
@jcrjr383Ай бұрын
I was wondering the same, but it Looks like they are already there..
@gusgeorgopoulos2305Ай бұрын
I took your advice and got the same set up but I ran the main part to the front so I can pause and skip tracks. Thanks so much as the sound really did exceed my expectations of how good it sounds. Also wanted to say your C6Z is really nice. Love the color. Cheers Gus
@GG-ef2dm2 ай бұрын
How does the bluetooth sound? I know with some of the cigarette plug in bluetooth adapters some of them sound like Sh**. I'm guessing with the ground loop isolator it sounds pretty decent.
@thawkproductions4248Ай бұрын
@@GG-ef2dm It sounds amazing honestly.. 100% worth it! Definitely do this mod. I have a cigarette lighter one in my truck and it's horrible lol.. don't do the cigarette lighter thing
@MusicMr492 ай бұрын
Whew! Great news going forward. I was going to adjust them today although instead opted to paint the white parking area lines in front of my building instead. Tomorrow is "D" Day! lol
@MusicMr492 ай бұрын
Didn't see any ratchet. I'm thinking that with my short fat hand I might drop the socket inside and not be able to retrieve it. So, the screws are easy to move?
@thawkproductions42482 ай бұрын
@@MusicMr49 easy enough with just your hand. If you have an extension on the socket to hold onto
@MusicMr492 ай бұрын
See if I got this straight - I measured my headlights from the ground up & they are 25" off the ground at the car. So, at 20' - 25' back you adjust both headlights to 25" vertically. Then adjust the passenger side headlight 26 3/4" from the center of the hood. What about the drivers side measurement from the center line out? It looks like the drivers side is down lower than the passengers side Vertically, right?
@thawkproductions42482 ай бұрын
Driver side light should also be 26 3/4" from the center line. Both should be 25" off of the ground as well
@MusicMr492 ай бұрын
@@thawkproductions4248 Thank you for your quick response. Really liked your video by the way. Could hear your voice well and your presentation was quality thawkproductions4248
@arturoromero64682 ай бұрын
I know this video is about 4 years old but is the port that’s coming from the intake manifold the out or in.?
@thawkproductions42482 ай бұрын
The lower port on the engine connects to the catch can in The port that is higher on the engine is the catch can out
@jahbless28103 ай бұрын
Good job 👍 that little gap between side skirt and flare piece would drive me crazy but looks good bud
Thank you so much! But I cant get the plastic pics to go back in even with a hammer. Any advice?
@thawkproductions42483 ай бұрын
Oh man! Idk. Nothing here should involve a hammer
@egguw3 ай бұрын
I just did my tps on my yata but I went with oem because the whole re clocking and calibrating is a whole step that I feel is unnecessary unless of course you have aftermarket ecu but the oem part works even better than my original so that’s a plus
@ragnarlinn64313 ай бұрын
I have an 05 an installed foglights with turn signal in them but for some reason when I break the amber turn signal lights up. You have any ideas why this is
@thawkproductions42483 ай бұрын
Do they also work as blinkers?
@MobileNickMechanic3 ай бұрын
Much appreciated man. Thanks for getting right to the point and showing the steps!
@youngkillerhd85934 ай бұрын
Hey I did everything you said but mine didn’t work. When I press the foglight button it clicks on the relay but the lights don’t turn on and I was wondering if you might know why?
@martinmeza408Ай бұрын
Did you ever find out what the problems was ?
@youngkillerhd8593Ай бұрын
@@martinmeza408 no I just hooked it up to my low beams
@martinmeza408Ай бұрын
@@youngkillerhd8593 do they work good or what ?
@youngkillerhd8593Ай бұрын
@@martinmeza408 yes they do but the foglights are always on which I like but some people don’t
@martinmeza408Ай бұрын
@@youngkillerhd8593 ahh yess I get you I’ll try to do it the video way first and if it don’t work then I’ll just do it your way man thank you!
@dkemp13374 ай бұрын
does that mean its alwats pulling volts or you have to pull the usb or does it drain the battery please advise 03 tahoe owner needs helps with bluetooth xm does work still
@thawkproductions42484 ай бұрын
I believe I wired it better over on this video So it isn't always on kzbin.info/www/bejne/bqCQmWuPpM-asNEsi=F3ftVV0mtRhO9ggy
@Matthew-ib8bm4 ай бұрын
If my car has integrated fog lights in my headlights am I able to just buy an extension cable or hid kit?
@OLLI_UP5 ай бұрын
Can you do that without a heat gun?
@thawkproductions42485 ай бұрын
You probably could, but the vinyl is so much stickier and stretchier when it's hot It's a lot easier to use a heat gun
@IOAN2ER5 ай бұрын
Where do i tap to get the oil temperature sensor placed?
@thawkproductions42485 ай бұрын
Oil filter sandwich plate, I added one for an oil cooler. But you could add one specifically for a gauge
@IOAN2ER5 ай бұрын
@@thawkproductions4248 i can put it on any tipe of filter?
@thawkproductions42485 ай бұрын
@@IOAN2ER Potentially? I'm sure there are ones out there that can convert your filter threads/diameter. But the one I have still uses the same OEM size oil filter
@wkeil19816 ай бұрын
That offset where the back of skirt meets the new vertical piece I can’t live with that
@warrenlucier57966 ай бұрын
Wire the gauge lighting into the headlights/dash lights and then the brightness should correlate with the dash; if you haven't done this already.
@moffenvetas78056 ай бұрын
Very well explained video, thanks😃👍
@SS_Tuning6 ай бұрын
thanks for the info, very helpful
@lostloam26257 ай бұрын
Thanks for sharing this info! you saved me $500 bucks on a new head unit that I didn't need!
@lostloam26257 ай бұрын
Thanks for sharing this info! you saved me $500 bucks on a new head unit that I didn't need!
@thawkproductions42486 ай бұрын
Hell yeah! Glad I could help
@BrettWareWoodWorks7 ай бұрын
Thank you
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@sean.g451624 күн бұрын
Did you ever find the right pin?
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@thawkproductions42487 ай бұрын
APTIV Metri-Pack 280 Series, Female Terminal Depending on what size wire you use they have ones with barrel sizes from 20g-12g
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@XavierLongoria-f4x7 ай бұрын
Which size pin is required for the fuse box
@lukelegg99157 ай бұрын
getting ready to do this on my Sierra and couldn't find a diagram anywhere, THANK
@thawkproductions42487 ай бұрын
Glad I could help, you're welcome!
@SuperHall987 ай бұрын
Awesome video dude!! Got all the right angles
@thawkproductions42487 ай бұрын
Thank you thank you
@chictastic8 ай бұрын
Thank you for not over complicating anything. I watched many videos and yours was the best. Greatly appreciated!
@thawkproductions42487 ай бұрын
Glad I could help!
@itzaemayne8 ай бұрын
Nice video man
@thawkproductions42488 ай бұрын
Thank you thank you
@mrincredible23308 ай бұрын
Wish I had a corvettes to do this mod 😢
@thawkproductions42488 ай бұрын
😂 well thanks for checking out the video anyway. Maybe one day you'll get one
@philpernice47228 ай бұрын
Definitely a nice upgrade especially with the sequential lights
@porky52758 ай бұрын
Did the wiring harness come like that or did you fab it up?
@thawkproductions42488 ай бұрын
I made the harness. Little bit of solder, few crimps, and some wire lol