Adjusting the Morimoto headlights

[@red5va]

Very informative video. Thank you! Now my Morimoto-equipped C6 won't blind anybody, and my night vision is better than it has been in years! Man, those little plastic things in the wheel wells were a pain in the butt to remove!

[@SuperOperator4]

Spot on process! I was all tangled up until I "followed the directions"!!!!!!

[@imagymdad2]

Great video!! Thanks much. Just installed these today and we got them somewhat adjusted but I will do this tomorrow and get them perfect.

[@MusicMr49]

Whew! Great news going forward. I was going to adjust them today although instead opted to paint the white parking area lines in front of my building instead. Tomorrow is "D" Day! lol

[@alexalcantar9371]

Great video sir. The measurements worked at great

[@leehollister1199]

Perfectly timed video - I had no idea how to get these things aligned since my engine builder installed them but the video explained everything perfectly. Thanks!

[@thawkproductions4248]

No problem, hope everything works out good for ya If they're too far out of alignment I have an install video as well, that shows which screws to loosen to move the housing around

[@XDgamer-lk8nf]

This video really helps I will be doing mine this Friday. I hope I don’t have to mess with the screws ur talking about if it’s way out of alignment. If so please send me the video nice c6 by the way 😎👍

[@mikeguy3721]

Excellent, thanks for sharing the information !

[@XDgamer-lk8nf]

Cool car this video should help me this week when I get time to adjust them 😉

[@thawkproductions4248]

Thank you, and good luck 👍🏻

[@MusicMr49]

Didn't see any ratchet. I'm thinking that with my short fat hand I might drop the socket inside and not be able to retrieve it. So, the screws are easy to move?

[@thawkproductions4248]

@@MusicMr49 easy enough with just your hand. If you have an extension on the socket to hold onto

[@garry34mackey]

Great vid 👌🏾

[@ffcorona]

Are the adjustment screws the same on the GTR Carbide C8 style headlights?

[@MusicMr49]

See if I got this straight - I measured my headlights from the ground up & they are 25" off the ground at the car. So, at 20' - 25' back you adjust both headlights to 25" vertically. Then adjust the passenger side headlight 26 3/4" from the center of the hood. What about the drivers side measurement from the center line out? It looks like the drivers side is down lower than the passengers side Vertically, right?

[@thawkproductions4248]

Driver side light should also be 26 3/4" from the center line. Both should be 25" off of the ground as well

[@MusicMr49]

@@thawkproductions4248 Thank you for your quick response. Really liked your video by the way. Could hear your voice well and your presentation was quality thawkproductions4248

[@thawkproductions4248]

I'm not sure, but I would assume they are very similar Sorry