3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
4 жыл бұрын
Пікірлер
@anigotdesignershoes 2 ай бұрын
are the clutches options only to you guys, or are there more clutches from different brands
@FischRacingTech 2 ай бұрын
With the "single" option you can use any good 350z or 370z clutch. The "multi" and "street twin" options are designed to be used with the Tilton clutches that are on our website(feel free to purchase those ones from somewhere else as long as the part number is the same)
@MultiDave195 2 ай бұрын
Is It must to hammer the tunnel in IS300 with your kit? What clutch kit to use for street and about 500hp? thx
@FischRacingTech 2 ай бұрын
The transmission wont fit without hammering. The video showcases an IS300 so you can just follow the marks and it should fit perfectly(check 13:42). Regarding the clutch, for street we recommend the ACT Single dics clutch that you can by directly from us(rated for 580fl/lbs). For all the clutch options check out this link: fischracingtech.com/pages/choose-your-clutch
@michaelaguirre6757 2 ай бұрын
What would need to be done to the driveline, ppf, diff, and axles to run the Z transmission on s1 rx8 w/ renesis 13b?
@FischRacingTech 2 ай бұрын
You would need to fabricate a diff brace (we only have one for rx7) and trans mount and customize the driveshaft
@JMY8965 3 ай бұрын
For the 3uz to cd009 adapter bell housing, is modifications to the transmission as far as additional cutting required?
@FischRacingTech 3 ай бұрын
It requires the same amount of cutting as the JZ adapter. See here: kzbin.info/www/bejne/nZzYeZ2bgatnbtUsi=tp7G-XkMwiqzUAgn
@JMY8965 3 ай бұрын
@@FischRacingTech so just cut the bell housing, nothing else " not required for LS" ?
@FischRacingTech 3 ай бұрын
Cut the bellhousing and part of the input shaft(we provide a cutting guide so you won't cut too much)
@JMY8965 3 ай бұрын
@@FischRacingTech in the video is says " not required for LS" , does that mean for a LS motor or LS430 Lexus ? Thanks
@FischRacingTech 3 ай бұрын
That is meant for the LS motor
@RotorKartel 3 ай бұрын
Which Rx8 starter?
@FischRacingTech 3 ай бұрын
We recommend High Torque 2.0KW Starter (04-08 RX-8) from Banzai Racing (www.banzai-racing.com/store/RX8_2KW_Starter.html )
@ムネヒロ 4 ай бұрын
すばらしい
@thejasonrk 6 ай бұрын
this is so well done. i haven’t even fully sorted out my build plan yet but need to grab one of these while they exist.
@RetroAnachronist 7 ай бұрын
$2800 is ludicrous guys.
@Lowclef 2 ай бұрын
You can buy an ls and a cd009 for way less than that.
@RetroAnachronist 2 ай бұрын
@@Lowclef $2800 is the price of this particular adapter. I went with a much much cheaper one from FabTech.
@rae.wrx19 8 ай бұрын
Looking to do this trans swap in a turbo 2 FC, do you know how much modification is needed for the trans tunnel for an FC?
@FischRacingTech 3 ай бұрын
There is tunnel massage necessary. FC tunnel is pretty small.
@ChrisT-hp2zi 9 ай бұрын
Anyone know the size of the bolts that mate the bellhousing to the the engine?
@ChrisT-hp2zi 9 ай бұрын
@FischRacingTech
@spookyandy1 10 ай бұрын
wtf is up with the shakey ass camera work. fuck!
@nobodyspecial5026 11 ай бұрын
I can’t locate anything that details doing this swap into a LHD FD3 RX7. I understand the PPF removal and trans/diff/driveshaft mods. My question is regarding trans tunnel fitment/modification and such. TIA.
@FischRacingTech 11 ай бұрын
There is a bit of tunnel massage necessary. See product pictures on the website for clearance.
@Marklp16 Жыл бұрын
RB adapter soon?
@FischRacingTech Жыл бұрын
Yes. Next year.
@builtalliance2501 Жыл бұрын
Just used this exact kit on my KZbin channel for a customers ls400 and I honestly say it’s top tier quality
@stephonhaydes2166 Жыл бұрын
Will this work on an rx8 series 1. 2004 manual transmission 6 port motor? Building a hybrid renesis motor currently and was looking into the cd009. Please advise
@FischRacingTech Жыл бұрын
yes.
@fherg94 Жыл бұрын
This adapter works on a jk41 transmission from Nissan?
@FischMoto Жыл бұрын
yes
@gamaliel311 Жыл бұрын
Fit mazda Rx8 with fd engine??
@FischMoto Жыл бұрын
yes
@Gaaptain_2jz Жыл бұрын
But best adapter kit hands down this thing drivers better than oem. Going from collins night and day difference
@Gaaptain_2jz Жыл бұрын
I Definitely put in the input shaft seal backwards like an idiot lol now I git a leak have to take it down again
@mercedescherokee6853 Жыл бұрын
What is the weight of the single mass flywheel? Also I've heard that there will be increased gear chatter without the dual mass flywheel that comes with the vq/cd009 engine combination, do you have any intention of offering this for jz engine owners? My IS300 is such a smooth street car and I'd hate to increase the NVH with this transmission when ar5/w5x combinations don't seem to have this issue. Thanks!
@FischMoto Жыл бұрын
14lb. Sorry, we currently don't offer a dual mass flywheel. However, we have several hundreds of kits out there with no complaints about this. The CD009 in general is a noisier transmission compared to other transmissions.
@SP-bf4jg 2 жыл бұрын
👍
@PeterHatch-mx7zc 2 жыл бұрын
Do you make any shifters for the cd009 thks
@FischRacingTech 2 жыл бұрын
We are selling the S9 CD999 relocation shifter.
@PeterHatch-mx7zc 2 жыл бұрын
Where do I buy this conversion thks
@FischRacingTech 2 жыл бұрын
www.fischracingtech.com
@kammoperformance 2 жыл бұрын
Awesome video!
@OXEN_HeavyGUN 2 жыл бұрын
just watched this . i am hoping this will fit my f250 drift build. i like the long handle and : out of the box versatility for end user fitment and adjustment. what a beautiful piece of hardware . i am going to try and come pick one up in person . next time i cross to bc from the states.
@itsreallytheo 2 жыл бұрын
With serialnine bellhousing pretty much the same are the flywheel bolts customized as well?
@FischRacingTech 2 жыл бұрын
Yes. Flywheel bolts are customized. These Bellhousings have been made by us since day one. They get re-branded for S9 re-sale.
@itsreallytheo 2 жыл бұрын
@@FischRacingTech can I get the bellhousing and order the flywheel separately too?
@FischRacingTech 2 жыл бұрын
@@itsreallytheo Please contact us via email ([email protected])
@brianrobinson9979 2 жыл бұрын
Why does a standard RX-7 or RX-8 clutch and flywheel not work with the Fisch Racing Bellhousing?
@FischRacingTech 2 жыл бұрын
The OEM RX-7 or RX-8 flywheels are too small because the location of the starter is further away from the center.
@peoplesambassadordm8279 2 жыл бұрын
The fisch adapter housing is different from the Collins adapter... which is the better way to go?
@BenPetersMedia 2 жыл бұрын
In my opinion the Fisch adapter is better because adapter plates usually have alignment issues which the Fisch Bellhousing doesn't have.
@christianwellmann 2 жыл бұрын
Very nice🥰🔥🔥🔥
@SP-bf4jg 2 жыл бұрын
Nice.
@assettocorsadrifting1221 2 жыл бұрын
😍
@BenPetersMedia 2 жыл бұрын
🔥
@nicheniche 2 жыл бұрын
Wait isn’t this a rebranded Serial Nine cd pro or who made this first?
@FischRacingTech 2 жыл бұрын
These Bellhousings have been made by us since day one. They get re-branded for S9 re-sale.
@nicheniche 2 жыл бұрын
Good to know, thanks for getting back to me
@garymcqueen6396 2 жыл бұрын
My guy spinning the input shaft with no gloves.... tough :)
@cooliomo 2 жыл бұрын
This is amazing!!!
@cooliomo 2 жыл бұрын
OMG and you guys make stuff for FC's!!!
@jkljkl218 2 жыл бұрын
Aye, fancy seeing ya here!
@cooliomo 2 жыл бұрын
@@jkljkl218 sup dude haha!
@jkljkl218 2 жыл бұрын
@@cooliomo I BOUGHTTTT ITTTT!!!!!! 🤣
@cooliomo 2 жыл бұрын
@@jkljkl218 omg I’m so jelly! So long silly ppf!
@k3n1073 2 жыл бұрын
How would you connect the wires to read for speed sensor ?
@FischRacingTech 2 жыл бұрын
Usual you take the signal from the ABS sensor
@DuDaMountain 2 жыл бұрын
Good product high quality ++
@Bazant-dm9pr 2 жыл бұрын
Hi wondering if this sits the same length as s4/5/6 boxes shifter?
@FischRacingTech 2 жыл бұрын
Hi. Its almost the same with the relocation shifter.
@therackles 2 жыл бұрын
The cost of your kit makes using this box as a cheap option unless. Its cheaper to just go with a tr6060
@aldocastillo1350 2 жыл бұрын
Will this kit fit an SC300???
@FischRacingTech 2 жыл бұрын
Yes. It works with a 2JZ.
@danthomas86 3 жыл бұрын
Does it matter if you were to use a manual out of a 370z, they seem to have some electronics for throttle matching... I take it the gearbox would just run fine as a normal manual?????
@FischRacingTech 3 жыл бұрын
yes. It should run like a normal manual.
@danthomas86 3 жыл бұрын
@@FischRacingTech And there's no rattle with your product... I've heard stories of rattling with these swaps... Be it from another well known company
@FischRacingTech 3 жыл бұрын
@@danthomas86 We don't know about rattle with our kits.
@ForwardMomentum 3 жыл бұрын
I have a multi-episode swap series on my KZbin channel and having done a MT swap in my GS400, I can say without a doubt this would have been a great kit had I gone CD009 in my car. Good job on this!
@arcangeldelagurda 3 жыл бұрын
that adapter is for brz / frs / gt86 ? ,and could you send him the link to buy that adapter for brz / frs / gt86? Thank you
@FischRacingTech 3 жыл бұрын
Sorry, not available for this car/engine.
@arcangeldelagurda 3 жыл бұрын
@@FischRacingTech ok Thank you
@ammoking6099 3 жыл бұрын
Maybe do a K24 cd009 kit. What mount did u guys use?
@FischRacingTech 3 жыл бұрын
We are doing a k24 next. What do you mean mount kit?
@ammoking6099 3 жыл бұрын
@@FischRacingTech sign me Up for one lol. transmission mount.
@FischRacingTech 3 жыл бұрын
For the jz-cd into an is300, we make a transmission mount. We actually have a few trans mount options on our website!
@pourtierbeatz7804 3 жыл бұрын
Whats the soundtrack its good
@HNatureTV 3 жыл бұрын
What starter is needed for the jz cd009 bellhousing?
@FischRacingTech 3 жыл бұрын
Any jz starter will work.
@nickcampbellisadick 3 жыл бұрын
next item on my swap list.
@PeaceSTAR253 3 жыл бұрын
You need to do a start up so people can hear the rattles. 🤣
@FischRacingTech 3 жыл бұрын
Whats your ig so i can send you a video. Not sure if its your clutch or the collins kit, but there are no rattles in any of our test cars.
@PeaceSTAR253 3 жыл бұрын
@@FischRacingTech pearce_the_hood_hippie I have the Collins kit on mine.
@PeaceSTAR253 3 жыл бұрын
From my understanding it's the flywheel being to light to absorb the vibrations from the motor then transfered into the input shaft.
@FischRacingTech 3 жыл бұрын
@@PeaceSTAR253 how much does it weigh
@PeaceSTAR253 3 жыл бұрын
@@FischRacingTech I'm not 100% sure because I bought the car swapped already but I think collins uses the fidanza flywheel that's 13.5 pounds.
@damonf9475 3 жыл бұрын
a kit for the rich. meanwhile domestic muscle cars have aftermarket bellhousings for $300 :/
@FischRacingTech 3 жыл бұрын
Will terrible alignment issues. There are cheap kits out there for jz - xx transmissions as well. Unlike those kits we havent had a single customer break an input shaft at any power level (yet) A JZ swap making enough power to require a non toyota trans is not a cheap junkyard build
@nicko9725 3 жыл бұрын
Geezus. Ill just snag a getrag for those prices.
@FischRacingTech 3 жыл бұрын
You would be paying more money for a worse feeling, hard to find, used trans, than you would be into a 0km 1000hp capable setup