Rotary to CD009 Adapter System | FISCH RACING TECH

[@michaelaguirre6757]

What would need to be done to the driveline, ppf, diff, and axles to run the Z transmission on s1 rx8 w/ renesis 13b?

[@FischRacingTech]

You would need to fabricate a diff brace (we only have one for rx7) and trans mount and customize the driveshaft

[@RotorKartel]

Which Rx8 starter?

[@FischRacingTech]

We recommend High Torque 2.0KW Starter (04-08 RX-8) from Banzai Racing (www.banzai-racing.com/store/RX8_2KW_Starter.html )

[@rae.wrx19]

Looking to do this trans swap in a turbo 2 FC, do you know how much modification is needed for the trans tunnel for an FC?

[@FischRacingTech]

There is tunnel massage necessary. FC tunnel is pretty small.

[@gamaliel311]

Fit mazda Rx8 with fd engine??

[@FischMoto]

yes

[@k3n1073]

How would you connect the wires to read for speed sensor ?

[@FischRacingTech]

Usual you take the signal from the ABS sensor

[@nobodyspecial5026]

I can’t locate anything that details doing this swap into a LHD FD3 RX7. I understand the PPF removal and trans/diff/driveshaft mods. My question is regarding trans tunnel fitment/modification and such. TIA.

[@FischRacingTech]

There is a bit of tunnel massage necessary. See product pictures on the website for clearance.

[@brianrobinson9979]

Why does a standard RX-7 or RX-8 clutch and flywheel not work with the Fisch Racing Bellhousing?

[@FischRacingTech]

The OEM RX-7 or RX-8 flywheels are too small because the location of the starter is further away from the center.

[@stephonhaydes2166]

Will this work on an rx8 series 1. 2004 manual transmission 6 port motor? Building a hybrid renesis motor currently and was looking into the cd009. Please advise

[@FischRacingTech]

yes.

[@Bazant-dm9pr]

Hi wondering if this sits the same length as s4/5/6 boxes shifter?

[@FischRacingTech]

Hi. Its almost the same with the relocation shifter.