g3gg0

Пікірлер

@ALFEDAL 8 күн бұрын

Нагрузки в виде лопастей нет, зачем так газовать то?

@bschanneladdy Ай бұрын

😂 congratulations finding part to fix the problem you created

@xhappy425 Ай бұрын

what frame is that?

@UmNitro Ай бұрын

Betaflight is strictly for small tests, that's why it blew up. What's the point in throttling like that while not flying anyway?

@MichaelRogersJesusrules Ай бұрын

same things happened to me even after using a smoke stopper 5 or more times then plug the battery in without the smoke stopper and boom :( whats the point if it doesnt stop it or tell you that there is a problem? its a jhemcu 30v 0.5A, well i never knew if the light (red) doesnt come on there is a short , learn somthing new all the time to bad ive blown up a few things as a newbie :( already

@skyfighter5720 Ай бұрын

das exakt gleiche hatte ich auch gestern als ich meine fpv dröhne in beta flight hatte. Das war aber nicht schlimm da ich einfach schlecht gelötet hatte. Durch die Drehung der Motoren hat es wiebriert und so ist der minus xc60 Stecker abgegangen. Dann gab es funken und ich hab die batterie ab gemacht. aber dann habe ich den Kontakt neu gelötet und jetzt geht wieder alles also ist mein fc nicht kaputt

@richardfalcos 2 ай бұрын

E qual seria a solução para não queima, seria comprar vários para fazer teste...kkkkkk

@user-wr2fc6qj2m 2 ай бұрын

Can I know chich frame is it

@interbudelblag 3 ай бұрын

bad esc

@ourchannel8215 3 ай бұрын

not about cap...electronic component can demage anytime when used

@fpvince4622 3 ай бұрын

why did you do that?

@TurtleModeFPV 4 ай бұрын

That's crazy lol... lit up pretty good 🙈😆

@tomasnemecek395 4 ай бұрын

Welcome to reality 😂

@Skysurferdrones 4 ай бұрын

whoops :(

@VR46Monster 5 ай бұрын

it was just some diode or whatever, nothing unrepairable

@minhtinnguyen594 5 ай бұрын

Congratulations it’s a boy🎉

@idiotsnifff 2 ай бұрын

Sorry it's trans 😵‍💫

@heitorbarrosmotta1133 5 ай бұрын

@mahesh_patil_02 5 ай бұрын

Bro which motors ur using

@waqar95ful 5 ай бұрын

do not spin motor faster without propeller...

@MrBlonde5k1 6 ай бұрын

G3ggo!!!! I just recognized your name from Magic Lantern - you cracked the 7D! You’re my hero! I did so much awesome stuff with that. You’re a LEGEND! You -would- also be into FPV like me. Hahahaha. Thanks again!!!

@voltzFPV 5 ай бұрын

Nerd will be nerds, cracked 700D user here 😂

@g3gg0 3 ай бұрын

Haha. Yes, thats me. Oh yes thats a few years now. Not into development of ML anymore, thats now in the hands of others. but still a bit involved in infrastructure.

@Blueheeler2013 6 ай бұрын

The legend says that the drone is made of iPhone

@patrickfrensdorff7485 6 ай бұрын

what brand esc was it? how much amp should it be able to give?

@andrewf3k 6 ай бұрын

From video I see that it was a capacitor in power source network, so just remove it and keep going 😂

@Powerloopvideo 6 ай бұрын

🙃🥲🥲🙃

@master_lox8639 6 ай бұрын

regenerative braking?

@WStreetFleet 6 ай бұрын

Thanks to this video my channel is starting to pop off lol. It says on KZbin analytics that most people watched my videos from this video

@Dongpham393 6 ай бұрын

how to i can open cmd folder ? where i cant find it

@loonywalker6729 6 ай бұрын

Why it is failed ? Is it a software bug or a hardware malfunction?

@sweetpoison4228 4 ай бұрын

He didnt solder a capacitor to the battery pads

@xardas-cp3rt 6 ай бұрын

1k rpm difference

@hifinsword 6 ай бұрын

I have ruined motors from doing static tests without a load on them. The ESC was up to the task but the motors weren't when not loaded. I suspect the same can be said for ESCs if the motors are up to the load, but the ESC isn't. My guess is the energy that would be normally used to turn the props, the load, is turned into heat instead. Whichever component that is the weakest gets too hot and fails.

@gatzetech3079 6 ай бұрын

A motor takes what it needs, so there is no energy 'somewhere' turning in to heat. You can get a feel for it if can read out the current. Without props it does draw hardly any current (except for the startup), when you try to slow it down with your hand the current goes up, like I said it take's what it needs. Therefor it's better to have a bit bigger ESC then the motor needs in power. A bigger ESC does not mean that the motor draws more current. I suspect it's a voltage spike or current spike causing this explosion, the coils in the motor can sometimes generete nasty current/voltage spike's.

@hifinsword 6 ай бұрын

@@gatzetech3079 If a motor spins higher than its rated RPM, the wires overheat and fly the motor. A loaded motor won't generally spin higher than the rated RPM unless it's overpowered with higher voltage battery. Motors will also go higher than their rated RPM if they are not loaded with a prop. If you don't believe me, run a motor without a prop using a fully charged LiPo at the motor's highest rated voltage at max power. Or run a motor with or without a prop on a battery higher than its rated voltage.

@Jandodev 7 ай бұрын

opps

@mrj.3025 7 ай бұрын

nice camera filter dude

@ASHWEAVE84 7 ай бұрын

What software were you using

@g3gg0 7 ай бұрын

Betaflight configurator

@blacksmoke9408 7 ай бұрын

автор озвучки пистолета из GTA San Andreas

@ftemaximal 7 ай бұрын

las fallas de Valencia

@LetsPlayOnWeed 7 ай бұрын

Zunächst einmal möchte ich mich herzlich bei dir für deine großartige Arbeit im Zusammenhang mit "Flipper Zero" und "Tonieboxen" bedanken. Es ist offensichtlich, dass du dich mit viel Engagement und Fachkenntnissen diesen Technologien widmest. Leider stehe ich derzeit vor einem kleinen Problem und hoffe, dass du mir dabei behilflich sein kannst. Wenn ich versuche, Dateien auf meinem Flipper Zero abzuspielen, erhalte ich die Meldung "Can not parse file". Das hat mich etwas ratlos zurückgelassen. Könntest du mir vielleicht einige Tipps oder Anleitungen geben, wie ich dieses Problem beheben kann? Ich danke dir im Voraus für deine Zeit und Unterstützung. Falls zusätzliche Informationen benötigt werden, stehe ich selbstverständlich zur Verfügung.

@g3gg0 7 ай бұрын

Komm am besten in unseren Telegram channel: t.me/toniebox_reverse_engineering

@notsure1502 7 ай бұрын

@DrFrantic77 8 ай бұрын

ohhh f±ck dude... that was not a good idear....

@aphidini 8 ай бұрын

A good ESC depends on the luck of the draw. In my experience, the presence or absence of a capacitor is not the cause.

@g3gg0 7 ай бұрын

The bigger the cap, the lower the chance to blow your ESC in extreme scenarios (bad prop, turtle mode). You can win in this lottery, you can lose. If you have TVS supressor diodes instead, you are definitely safe. Look for e.g. FETtec Spike-Absorber with a good explanation how it works

@killswitchfpv5820 8 ай бұрын

You are very fool man

@aciidd6369 8 ай бұрын

Man u are scaring me im building my first ever fpv drone after dji fpv and I have a 6s build paired up with a 5" quad so why did this happen how do I avoid it.

@paulfritze2214 4 ай бұрын

Voltage spikes can overload the ESC, so just make sure you solder a capacitor to the esc side of the battery lead and you should be fine. Capacitors smooth out the power, so they are essential for any kind of esc. The guy in this video was a bit of an idiot for doing this without a capacitor.

@Chillin-fpv 4 ай бұрын

Hopefully you bought the vifly short saver 2

@noisy_boi_fpv_3920 8 ай бұрын

That's nothing to do with cap probably your soldering at them loads doubt it's cap or the lack of

@mark6302 8 ай бұрын

ahh xD

Ең жақсы KZbin

Пікірлер