Awesome video! Nice to find someone with the same bike and same pads! I’ll stick mine on later 🤙🏼
@RhinoRSA Жыл бұрын
Haven't seen a video from this guy in over 5 years, I hope he's okay...
@MihaiS09 Жыл бұрын
And the two small ones?
@gregsmith_za Жыл бұрын
12v5w bulb, part number 92069-1016. You can take a look at this site, it gives nice parts breakdowns: www.motorcyclespareparts.eu/en/kawasaki-parts/2010-er-6n-motorcycles/headlight
@aristo32za27 Жыл бұрын
Alright I know this is a long shot since this was uploaded yonks ago. But dude where did you get the integrated tail light from? Been wanting one for my ER6 for ages. But cant seem to source them locally (DBN) and you never know if the online stuff is "actually" gonna fit. Tail tidy looks leka too. Will watch the video again in slo mo and copy and paste 😂
@gregsmith_za Жыл бұрын
Hey bud, no worries. You can take a look on ebay. I also couldn't find locally so took a chance on ebay. I found one that looks similar to the one I got but the risk is yours to take. Ebay has a good money back policy so keep an eye on the expected delivery date. If you don't receive something within 30 days of the expected date, send them a message and they refund you. www.ebay.com/itm/374640817712?hash=item573a553630:g:KrkAAOSw9X5kPz0b&amdata=enc%3AAQAIAAAAwEuUlAPSY6%2BtexwpALQqK5NDuLVKpMIrbxjjSQ0Uem6re3uRmjOk9z8kvoZ02XYaFXailBo%2BZYCOmMqiTLwG8W%2B0gi3YrFf4gaV4Kx7sAKBFYzxsaIodOCTcGAujqpkCDZtcgvGRxOLK42XZY8eOfjG06wqvpydVTf2m9hTyywW69d8GyflmYp7h1e5GxMmcXvb5ntF9U3%2BAAkYYHkf3IARUVWutJYQnY3FYZN3W5iTguNlhjez1NklnlBGgYw%2F9ug%3D%3D%7Ctkp%3ABk9SR7Ls5o2CYg Good luck!
@gregsmith_za Жыл бұрын
You should be able to find some that are even cheaper, this was just a quick search.
@aristo32za27 Жыл бұрын
@@gregsmith_za Shot bud, will definetly look into it!! 👍
@dominiquemoore2910 Жыл бұрын
Where did you get the bulbs from ?
@gregsmith_za Жыл бұрын
I got them from a local parts store but I'm sure you can find them online at Amazon or Ebay.
@81kopka2 жыл бұрын
Perfect 👍👌👏💪
@fatalisticend2 жыл бұрын
Many thanks this is just what I was looking for. As a new rider I constantly forget and I’d rather have something remind me so I can develop the habit. The brake cutoff is an excellent addition to a simple modification. :D
@shankarbn2 жыл бұрын
Amazing. I have seen tons of videos and no one else used angle iron. angle iron is simpler to use especially to make slotted holes and hold the swing arm spool and at the same time strong AF. Brilliant and simple design! Also you make coping cuts look so easy :) Did you have to weld gussets to add more strength to the 2inch angle iron or not at all? I ordered a paddock stand for my Tiger 1050 but motivated to build after watching your video.
@gregsmith_za2 жыл бұрын
Thank you for your kind words. Appreciate it. I didn't have to add any gussets, there might be one or two but that's left over from the steel workbench I cut up to make the stand. But it doesn't hurt to add gussets or other bracing. If you're going to make one, change the angle from 65 degrees as I have it to around 80. It'll work better and have less load on the joint. Take care!
@shankarbn2 жыл бұрын
@@gregsmith_za Will do, thanks!
@Vagdinox2 жыл бұрын
Some people says mantaining a bike is enoying but I think is really an anjoying moment opening it up and letting everything perfect soo when you go on the streets you know you are going in a well prepared bike I got a 2009 ER6N I Will get a air and oil filter a new oil and antifreezing liquid and the sparks and will let it as new
@ALEXANDERCRETA12 жыл бұрын
Nice video thanks for the idea
@MrYouTuba2 жыл бұрын
This was really useful - I plan to take the same approach with my MGB because the indicators don't self cancel most of the time and I find myself driving along with them flashing for ever (and the indicator lights on the dash are perfectly positioned to be hidden behind the steering wheel!). The only thing I don't understand is why there is no sound when the hazards are on. It seems to me that there would still be 12v across the buzzer in this this case although maybe the circuitry on the bike is different from that on the car. I will just have to experiment I suppose.
@gregsmith_za2 жыл бұрын
If I'm honest, I really can't remember why it worked, but it did (>_<). I also thought it would buzz when the hazards are on. Here's the website I got the info from. www.rattlebars.com/mtz/fourways.html Good luck!
@pistolpeetlokk3 жыл бұрын
I did this and now my battery keeps dieing in such a noob
@anonymoushkrepsolrider42173 жыл бұрын
is bulb h7 or h11? thanks
@gregsmith_za3 жыл бұрын
Mine was an H11 bulb
@ananiassoares4183 жыл бұрын
só serve pra roda trazeira a dianteira fica no chão
@gregsmith_za3 жыл бұрын
That's correct
@memolocoporlasrutas99443 жыл бұрын
Cuales son las medidas ???
@gregsmith_za3 жыл бұрын
0:45 - But it depends on your specific bike
@jiantlive88594 жыл бұрын
is it possible to know which windshield is fitted?
@gregsmith_za4 жыл бұрын
Sure, it's a Puig Rafale. I think the newer models look a bit different.
@zefroes66164 жыл бұрын
Simples e show
@davidcowton10704 жыл бұрын
I could do with one of those, the centre stand on my bike gets in the way when aligning the wheels
@tuanz80094 жыл бұрын
Love that ''click'' sound.
@tuanz80094 жыл бұрын
Which engine oil did you use?
@gregsmith_za4 жыл бұрын
I used Castrol Actevo 10w-40 4 stroke oil
@marjanger4 жыл бұрын
The buzzers are cheaper than diodes so you can avoid installing diodes by using ONE BUZZER FOR EACH SIDE.
@pgarneau20034 жыл бұрын
in asian countries they just wire parallel 1 buzzer across signal relay
@altairlucio33754 жыл бұрын
🤔👍👏😂🇧🇷🇧🇷👍
@mitchellmitchell69384 жыл бұрын
Was that 6011 rod?
@gregsmith_za4 жыл бұрын
I believe it was 6013 but it was a while back.
@mazda3junkie9364 жыл бұрын
Do you have links for the air filter and spark plugs??
@bionickchief4 жыл бұрын
can i ask you,do they actually offer better grip on the tank?some of my pants just slide on them,thats the reason im thinking on buying them,can you sort this out for me please
@gregsmith_za4 жыл бұрын
Definitely more grip than without the pads, but it's not Velcro so you'll still have some movement. They're cheap so I reckon it's a low risk purchase even if they don't live up to your expectations. I'm quite happy with mine.
@Sophist9904 жыл бұрын
Nice vid ...But now I gotta buy 10k in tools to build them? ehh ill just buy a set.
@gregsmith_za4 жыл бұрын
Eh, not 10k for the tools but I get the point. If I didn't already have the tools I wouldn't have bought them especially to make the stand. Definitely cheaper and easier just to go and buy a stand!
@MrAloysioguimaraes4 жыл бұрын
Hey, Greg. Nice job! I have the same bike. Your video inspired me to make one. Let me ask you a question. Do you believe it is safe to let the bike parked in a paddock stand like yours? I mean in a flat surface. Thanks in advance for any feedback.
@gregsmith_za4 жыл бұрын
Thanks man! If you're going to make one I'd say change the angle to be a bit more vertical, say around 80 degrees. I don't see why you couldn't leave the bike parked like that, but I'd probably not do it over the long term. "IF" something happens then you'll find the bike on it's side. I only use the stand when I'm oiling the chain or working on the bike. The rest of the time it uses it's own side stand. Good luck!
@MrAloysioguimaraes4 жыл бұрын
@@gregsmith_za , thanks a lot for sharing your viewpoint. In fact, I'd make a paddock anyway. I really appriated your tutorial. The reason why I'd like to let it on a paddock is due to kids running around the garage of the building where I live. It's not allowed, but they access the garage and a couple of time I've seen they're involuntary tapping the bike. Then I got scared they drop the bike. This bike is heavy. Somebody can get hurt. I've talk to their parents, but kids are hard to control.
@julesarsenault80004 жыл бұрын
Great Video ! Helped me change all headlights to LED lighting on my 2009 Er6-N. Thanks from Montreal, Canada. For those looking to change the small position lights : gently pull them out as the casing is only held in place by the rubber.
@gregsmith_za4 жыл бұрын
Awesome thanks Jules. Glad it helped
@Tossiboll4 жыл бұрын
The 2 smaller bulbs that you didn't cover in this video are they h7? Can't find any info about them anywhere
@gregsmith_za4 жыл бұрын
Hi Emil, it's one of these little guys(12v 5w KLE500-A1) www.motorcyclespareparts.eu/en/kawasaki-parts/920691016 Even though I'm not in Europe, I found this site has an excellent breakdown of the parts. www.motorcyclespareparts.eu/en/kawasaki-parts/motorcycles/er-6n
@ArcanePath3604 жыл бұрын
Typical of Big Mike to show up when you were done and not before you started!
@robertp93704 жыл бұрын
Did they hold up for a while or are they junk?
@gregsmith_za4 жыл бұрын
Hey Robert. They're still going strong actually! The adhesive along the bottom edge is starting to come a bit lose, suppose it's where there's the most movement but other than that they're great.
@robertp93704 жыл бұрын
Greg Smith I just got a 2011 650r where did you buy these? I like them
@gregsmith_za4 жыл бұрын
@@robertp9370 I got mine on eBay. The're cheap. Not sure what currency you work in but I'd guess between $8 and $15. Just search ER6 Tank Pads and you should come right.
@fly4fun245 жыл бұрын
awesome video
@gregsmith_za5 жыл бұрын
Thanks man, I appreciate it
@macoyrams51765 жыл бұрын
Good working
@bobjackson64965 жыл бұрын
What are those signal strips you have in the rear? I love that
@gregsmith_za5 жыл бұрын
Hey thanks man. You're exactly right, they're strip lights. Cheap ones from eBay actually. I disabled the brake lights in them and only use them for turn signals now. There are better ones out there but these still work fine after almost 2 years. www.ebay.com/itm/Hot-LED-Light-Strip-Tail-Trailer-Brake-Stop-Turn-Signal-48-3528-SMD-Plate/173872274004?epid=2304802369&hash=item287b985a54:g:tgMAAOSwVFJbxs5V
@gregsmith_za5 жыл бұрын
Oh I bought 2 of them and connected each of them up. If one is fitted horizontally it has a left and right signal. It'll make more sense if you see the picture.
@bobjackson64965 жыл бұрын
Greg Smith thank you so much, I’m 100% going to do this. I also am in need of a nice phone mount/holder too.
@gregsmith_za5 жыл бұрын
@@bobjackson6496 I think I got my phone holder off of eBay or Banggood. It works fine even at high speed but I found that I hardly ever use it anymore. I think I only use it for when I use the gps on my phone, but I generally know where I'm going :-)
@anthonywilson83665 жыл бұрын
What do you call the thing you buy to put the stand on???
@gregsmith_za5 жыл бұрын
Hi Anthony. I'm not sure I follow 100%, Do you mean the swingarm spools? Or they're also called bobbins. 0:15. If you timestamp a part in the vid I could try help out better.
@anthonywilson83665 жыл бұрын
@@gregsmith_za yeah that alot
@gregsmith_za5 жыл бұрын
@@anthonywilson8366 Cool cool. I got mine off eBay. Just searched ER6N padock stand bobbins. Make sure you get one that fits your bike, the bolts are different diameters.
@soldiers3035 жыл бұрын
i think you did the angle too much? Also whats the red light flashing when you testing it out?
@gregsmith_za5 жыл бұрын
Hey man. Yeah you're right, I mentioned in some other comments that if I did it again I'd have made the angle closer to vertical, say around 80 degrees. Definitely didn't need to be that much. The flashing could've been me testing my tail tidy. I think I recorded those parts the same day. kzbin.info/www/bejne/iJ_blqClo8mKlZo
@morenohabets75765 жыл бұрын
hi man thanks for that video this will help me out! I also got a 09 er6n and am looking to costumize it a little bit by changing some standard features on it. Any reccomendations?
@gregsmith_za5 жыл бұрын
Great thanks Moreno, glad it'll help. I got a bunch of subtle custom parts off of eBay for aesthetics, haven't changed mechanical components from standard yet. I got bar mirrors, paddock stand spolls/bobbins, rubber tank grip pads, shorty levers, tail tidy, led brake light with integrated turn signals. You have a lot of choices and they're all easy things to do. Go have fun shopping and fitting! If you have any issues let me know and I'll TRY and help where I can :)
@nekoakua50645 жыл бұрын
That Katana 😍😍😍
@gregsmith_za5 жыл бұрын
Lol 😂
@consciousobserver15145 жыл бұрын
I got a stand from Harbor Freight for $33 and it is Aluminum looks great and works great
@gregsmith_za5 жыл бұрын
That's cheap, unfortunately no Harbor Freight in my country. Stands cost around 3 times the amount here.
@consciousobserver15145 жыл бұрын
@@gregsmith_za you can order them online and have it sent to your house
@gregsmith_za5 жыл бұрын
@@consciousobserver1514 import duties and shipping costs make them quite expensive. If they were the equivalent of $33 here I'd definitely have bought one. The prices have seemed to drop a bit since I made the video though
@kamandanuwijaya89105 жыл бұрын
nice bike
@gregsmith_za5 жыл бұрын
Thanks man!
@nelvilla865 жыл бұрын
How would you suggest altering this DIY for stand that has the flat rests? Not sure if the proper language but my bike is a cruiser and can’t have pegs it would use the flat small square piece to balance on.
@gregsmith_za5 жыл бұрын
Hi Marisa. Take a look at the link below, it shows a factory made stand the type of which I think you're referring to. www.amazon.co.uk/OXFORD-BLACK-MOTORCYCLE-PADDOCK-STAND/dp/B003BF69J2 If that is the case, then instead of cutting grooves for the bobbin pins (3:04) you'd just drill holes and fabricate a bolt with a cleat welded to the end (angle iron) for the square piece to rest in. I'd pad the angle iron with some thick rubber to protect the bike. Without knowing what bike you have or what the swing arm looks like I can't be 100% sure though.
@imabeast73975 жыл бұрын
it looks like a huge pain in the ass
@gregsmith_za5 жыл бұрын
The spark plugs were a pain in the ass. The rest is fine, just takes a bit of time.
@rookierider6n7795 жыл бұрын
Lol I need a torque wrench to do that
@claudioroder65545 жыл бұрын
Very good
@gregsmith_za5 жыл бұрын
Thanks!
@samguy83535 жыл бұрын
What kind of a wind screen is that? May I have link to the website to buy?
@gregsmith_za5 жыл бұрын
Hi. It's the Puig Rafale. Not sure which country you're in so here's the manufacturers website: puig.tv/en/tuning-motos/carenabrises-universales-para-faros-no-redondos/windshield-rafale
@Buggsy-sy2of5 жыл бұрын
Question for ya boss. What type / brand of wind screen do you have. I have been looking to add one to my 09 as well. I'd appreciate the info.
@gregsmith_za5 жыл бұрын
Hey man. It's the Puig Rafale. I have the old model, I see the new one looks slightly different. Puig make a screen specifically for the ER6N but the Rafale is a bit bigger and looks a bit better in my opinion. They're super easy to fit, just get some foam and stick it to the screen where it goes over your instrument cluster otherwise it will scratch.
@Buggsy-sy2of5 жыл бұрын
@@gregsmith_zaAwesome. Thanks for the info, and for the advice as well. I'll be sure to throw some foam on it. Much appreciated.
@aedryk5 жыл бұрын
do you know the size and thread pitch for the plug?
@gregsmith_za5 жыл бұрын
Hi Aedryk, I don't know actually but I'll see if I can find the old one. Here's a link to one I bought www.ebay.com/itm/Billet-M12x1-5mm-Magnetic-Oil-Drain-Plug-Bolts-For-Kawasaki-ZXR250-ZXR400-ZXR750-/182784288190?hash=item2a8ecae5be
@aedryk5 жыл бұрын
@@gregsmith_za Thanks for the quick reply. I did some digging and im pretty sure its a M12 1.5 so thats what i ordered. cheers and safe riding mate!
@gregsmith_za5 жыл бұрын
@@aedryk Pleasure man. Yup, it's M12x1.5mm. Feeling silly because that exactly what the link I posted said >_< Keep safe bud!
@michaelgiddens43765 жыл бұрын
Hi Greg Just found your signal buzzer post. is there any other wiring required to make the buzzer silent when the brake is applied ?
@gregsmith_za5 жыл бұрын
Hi Michael. At 0:16, the line shown on top is the 12V + power. If you use the + cable that goes to your break light it makes the buzzer cut out when applying the break. Installation of the diodes are also important, they only let current flow in one direction.
@michaelgiddens43765 жыл бұрын
Thanks Greg
@michaelgiddens43765 жыл бұрын
The 12v supply in your diagram seems to indicate it's a negative not a positive rail, is that correct ?
@gregsmith_za5 жыл бұрын
@@michaelgiddens4376 OK, the diagram is as follows. Top line is brake light +. Line on left is left turn signal +. Line on right is right turn signal +. The piezo + is connected to the diodes, piezo - connected to brake +. There's an article that I got that I can send to you in pdf. The website was removed but I saved the pdf. I could send to you if you'd like?