Thanks, man. I have a fused relay triggered by the ACC wire to two 100W Type-C PD chargers. 1 for the Type-C hub (powers phone and Fiio DAC) and the other to the monitor. When I turn the car off, everything shuts down. I have "Charge connected device" turned off on the phone's settings, so it doesn't try to power anything connected to it.

Thank you for the reply. I tried disabling "charge connected device" so my phone doesn't try to power the monitor, but it just won't turn off. Perhaps disabling "hdmi auto start dex", I'll try other things such as HDMI auto start dex to see if that'll let me disable "charge connected device". Any other suggestions are welcome.

Hi, I used to have issues losing GPS signal. I played around with the settings and it now works. Try these settings. I hope it works for you. I am using a Note 20 Ultra SM-N986N Location Services: Turn OFF Wi-Fi and Bluetooth Scanning Developer Mode: Turn ON Force full GNSS measurements Power Saving: Turn OFF Enhanced Processing: Turn ON

Hi, thank you for tips, but It didn't works for me.

@@maciekmirek8280 If you are using a hub, you can also use a USB vk-172 or a Bluetooth Garmin Glo 2. But these only work with Developer Options turned on and with Location Mocking on. The Garmin Glo 2 works a lot smoother.

Hi, I have relocated them into a custom center console. The dash cam is hard wired.

Yes, sir.

Here you go, sir. 13 Inch 4K OLED Touch Screen Portable Monitor 550Nit USB-C HDMI-Compatible External Gaming Monitor for Xbox Switch Laptop a.aliexpress.com/_EIt7q3L

Hi, pretty simple, from Note 20 Ultra to USB-C Dock with HDMI output. You can connect the monitor and DAC to the hub.

What car brand and model do you have? I have a n18 inch DEX setup in my car with 0 modification done to the car. Just plug and play. Maybe I can help.

​@@gate9595 it's a 2017 Honda pilot

​@khamadiojiambo You can add it to your car in just a few minutes with no modifications. Your car has a glossy plastic trim around its infotainment, which is excellent to stick double sided tape to. Strategically place no more than 4 magnetic phone mounts that you can get from Amazon. They’ll come with metal plates that stick to the back of your tablet/monitor. These magnets are relatively small (About 6 x 2x 2 cm, or 6x 2 x 0.5 cm ) with extremely strong magnets (neodymium N52s) Unless you want a 15 inch monitor or more in your car, a Samsung tablet (10 to 14 inch) would make the most sense). None of Samsung flagship and FE edition tablets require a monitor to run DEX, and DEX works much better than on a monitor. You don’t have to deal with cable management; it will just be a clean tablet on your dashboard thar you can remove anytime. DEX works very well on monitors, but it just works excellent on Samsung tablets. Note: Any tablet or monitor larger than 10 inch may be in the way of your AC vents (something to consider). You may get away with mounting a 12 or 14 inch tablet vertically.

Awesome!! Thank-you very much!! 🙌🙌

It is very convenient, I'm sure you'll love it.

@@thatonecarmonkey4477 I will keep you posted. Do you use a mouse or touchpad to navigate the screen?

@@RussellHogan I use a touchscreen monitor

@@thatonecarmonkey4477 Cool. I am working on my setup now. What monitor do you use?

@@thatonecarmonkey4477 What’s the name of the monitor?

Hi, the phone is connected to a Fiio BTR5 DAC via bluetooth, then that is connected to the amps. I will be replacing that with a DSP w/ built-in bluetooth.

It's on the carpet now, but will be on a built-in dock in a console I am building.

They do, I've since replaced the radio with an android unit. But, yes, tried the blank CD. It worked.

Hi, yes. I think there's a video he in KZbin about that.

I love this unit, it has all the features and output that I need. Check it out: joyingauto.com/

Is yours the 8"

@@m3xicano4ever It's the 9 inch.

Thanks

Db6501?

Yes, I instead installed an AUX input.

Hi! On eBay, search 12/24v bluetooth module" 🙂

Thanks, ArmorLab!

I just checked, I couldn't find the same one. Not sure if they still offer the same model.

ArmorLab, yeah I couldn’t find it either. I found this one in Amazon. Bluetooth Board, DROK Audio Receiver Bluetooth Module DC 5V-24V 12v Portable Wireless Electronics Stereo Music Receive Circuit Chip with Micro USB Port for Headphone Speaker Home Sound System DIY www.amazon.com/dp/B07P94Z9XR/ref=cm_sw_r_cp_api_fabc_vleXFbTR93SG2?_encoding=UTF8&psc=1

Looks like a better quality module. Any would do, as long as it doesn't have the "Bluetooth is now connected" lady voice. 😁

Correct

Hi, James. I tried that, but there was a ground loop that I couldn't get rid of.

@@thatonecarmonkey4477 I wired mine up the way you showed in the video and works great. Thanks for making the video.

@@jamesstotler329 You are nost welcome.

Yes, sir. Here is the setup. drive.google.com/file/d/1yGKKXGRXebiBWT3RYuT-li7yEDRnKcG1/view?usp=sharing

Here you go. kzbin.info?redir_token=QUFFLUhqbVBiQmY5SmFoNEVwUUg2eGtrS0M0X1htd2VTQXxBQ3Jtc0trTl9SMjB3TWE1WXRZaHZVa0c2ZFhxd0RxS0hWa1pQMG5sVDR1am5JT1R4Z3JmdU9oUmJJNjVQdHBhdDlwZVhrejhhOVEyN29yeFJsVnRQWWpuQXdqa1ctV1ZWbW4tR01pUEJNZEVpNDcwa00wWXJYOA%3D%3D&v=Esu7R81HMfg&q=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D0B4Bw2WC6jH1fQTZHQ3phcW5MT2s&event=video_description

I will try it in a radio of 99 I hope and it works, thanks for the information.

No doubt!, were obviously looking for info on how

No, sir.

Alaric Thanks!

@@thatonecarmonkey4477 i have similar vehicle what do you have in there

Alaric It's all different now. I installed a 9 inch android head unit.

Hi John, no, I don't have the tape deck, hence the CD route. It's wired differently now, I killed the CD altogether and just added an Aux input instead.