Waltherson R.C.

Пікірлер

@terryturner5360 4 күн бұрын

I have seen a removal method for the top pins that doesn't cause any damage, unfortunately at the moment I can't remember which channel it was on. If I can find it I'll send a link

@walthersonr.c.3360 2 күн бұрын

@@terryturner5360 Thank you, I have already obtained hardened ball ends . It’s just since the 80s companies are using cheaper and cheaper materials and it’s all about them saving a book to make a lot more but thank you sir! Thank you for watching my video and commenting please keep helping the small channels like mine!

@MrWhoever 6 күн бұрын

could you link the friction shocks maybe?

@walthersonr.c.3360 6 күн бұрын

@@MrWhoever Hello , the shocks and wheel came from aliExpress two different sellers the shocks were about 8.00 or 9.00 at the time I purchased the wheels were ranged from 5.00 to 11.00

@jamisonsenitz2528 7 күн бұрын

Thanks for the heads up man!!!!!

@sixxxis 26 күн бұрын

Any vids of you drifting this bad boy?

@sixxxis 26 күн бұрын

your voice reminds me of my late father. sub :)

@neonnerd1364 26 күн бұрын

I designed a front bash bar with a tow hook and intercooler that you can 3d print for the rx7 if you're interested. The files are on cults3d. I have plans to make other cosmetic mods and some other parts in the future.

@walthersonr.c.3360 13 күн бұрын

Thank you, that would be great, but I have not got in to 3D Printing yet. I am hoping to after the new year! I would appreciate information on a printer!

@neonnerd1364 13 күн бұрын

@walthersonr.c.3360 personally I have an ender 3 but I plan to upgrade after the new year. From what I see you can't go wrong with a bamboo labs printer. Which one you get depends on what you want to spend and how large of prints you plan to do.

@imaginatorproductions Ай бұрын

If I was to change the wheels of the ldrc Honda nsx, do I require the metal hubs or is it just recommended?

@walthersonr.c.3360 13 күн бұрын

Hello changing the wheels you can keep the plastic hubs . The metal hubs work better to me !

@imaginatorproductions 13 күн бұрын

@@walthersonr.c.3360 thanks, just got round to changing the wheels yesterday. Thankfully I didn’t need the metal hubs because I didn’t buy them lol. The car looks great now

@bighextacy 3 ай бұрын

By the looks of that remote you've got the 1st version. There's 2 other versions with tree newest having a tiny lcd screen on the remote and i believe that one has dual rate but i could be wrong. I have the version 2 in the k989 and 284010. Bigger! Cheaper looking remote but it has a beefier center shaft and the 284010 has a blue rally car body with leds. The only real difference between the k969 and the 2 i have is the locked diffs and plastic wheels on the k969. Tons of upgrades for those little cars. I would discourage you from converting to 2wd for drifting though. Even with an extended chassis (110mm wheelbase) it is very difficult to keep it from spinning out even with a premium gyro in 2wd. I regret chopping the center shaft to make both of mine rwd. Just enjoy power sliding tar little awd - it's a blast even with a cheap gyro. Or slap some rubber tires and you'll be amazed how fast those little cars are stock. Oh and you might wanna go in and lube the diffs if you don't want to wait for it to break in. I didn't like that body but they're fun little cars

@walthersonr.c.3360 3 ай бұрын

@@bighextacy Hello and thank you for viewing the video, yes I believe I was sold the first version, from this company, the one that was ordering should’ve heard dual rate as well as the newer control, i’ve made a shaft to run it rear wheel drive, and the only way to hooks up is on drywall and 2 Wheel drive ! If you’re gonna buy parts for these little cars by the parts from WL toys ! I’ve run the car on tile wood composite floors, and my best results were with drywall !

@bighextacy 3 ай бұрын

Do you have a video with links for your brushless build? What receiver and radio are you using?

@malky525 3 ай бұрын

Nice project build. I just finished the associated DC10. Very poor instructions and front end geometry needs abit of work to fix binding and rubbing issues. Not a fun build. The reve d rdx was way better. Anyway..looking forward to more mst updates.

@walthersonr.c.3360 3 ай бұрын

@@malky525 hello and thank you every view and comment matters to me ! I am looking to install onisiki or hobby wing in the rmx , my biggest problem is finding somewhere to run all of my drift car. The city just builted a new skate park!

@malky525 3 ай бұрын

@walthersonr.c.3360 I have trouble finding places to run also, in farming area australia. It's all dirt out here! For the dc10 I went aliexpress omg v4 gyro, omg brushless servo, rocket 10.5t and hw 120amp quickrun 10bl. All budget friendly but works as well as my expensive equipment.

@Fast_Lane_RC 3 ай бұрын

Hello my fellow youtuber nice videos you have, i want to ask for your guidance in buying one of these, wich one do you think has the best electronics and gyro out of the box for drifting?

@walthersonr.c.3360 3 ай бұрын

@@Fast_Lane_RC Hello and thank you for viewing the channel, LDRC have (4) versions of the vehicles the ,Toyota ae86 v1 & the yellow and silver Rx7 as well as the white nsx are v1 .all of the v2’s v3 & v4 have good electronic.The GTR’s and Mazda mx3 have better controls,

@Fast_Lane_RC 4 ай бұрын

Hello and thanks for sharing, nice video about a nice little car, well done.