Thanga The One

Пікірлер

@mavelikkra Ай бұрын

Thank you bro, you had explained it properly not like the other people. i appreciate your effort and talent to do this. i have one doubt, can i install the same remote start in my 2004 Geep Grand Cherokee..

@NelsonVelez-wo8mt 2 ай бұрын

If that is galvanized steel, be sure to grind the area you are going to weld prior to welding it and make sure you are using proper respiratory equipment and plenty of ventilation. Welding galvanized steel can create fumes that cause metal fume fever and has high potential for long term side effects that can drastically reduce your lifespan and/or quality of life. Be safe.

@brother7238 Ай бұрын

Thats the main reason i weld that stuff without respiratory masks and in closed not ventillated room

@johnsanford346 2 ай бұрын

Testing the relay with a 9V battery is genius! Never seen that before.

@zapstrapsnmudflaps8609 2 ай бұрын

Durka durka

@marilynalexander1101 2 ай бұрын

What color

@thangatheone904 2 ай бұрын

@@marilynalexander1101 Lifeproof Pawnee Cove Travertine 22 MIL x 11.9 in. W x 23.8 in. L Click Lock Waterproof Vinyl

@alekuzunovic203 2 ай бұрын

My favorite part is when you used salt-pepper to clean off the silicone. Thank you for the instructions.

@victorschechter7075 3 ай бұрын

Great stuff, thanks for showing this.

@nitrofreakmanho 4 ай бұрын

Never undercoat you vehicles. It will trap moisture beneath the undercoat and inside the frame. This will deteriorate the metal from the inside out, and that will be hidden behind the undercoat until it’s too late.

@deegaw11 4 ай бұрын

Did your XJ had pistol slap and did the seafoam help get rid of the noise by any chance?

@thangatheone904 4 ай бұрын

No, I had no change in noise or performance, as you can see there was no much carbon in mine it did clean little bit.

@drummerboy9041 5 ай бұрын

place your tank in front of the exhaust and the heat from the exhaust will keep it warm.

@mic0917 6 ай бұрын

Are lights and solar panel water proof ?

@thangatheone904 6 ай бұрын

Yes, it is working good till now , even in winter snow, it worked 4 hours daily, in summer up to 8 hours

@w.c.6678 6 ай бұрын

At 9:49... when you INSERTED your KEY into the QUICK CONNECT... you LOST me..... I couldn't QUIT LAUGHING!

@amalekited 6 ай бұрын

Very nice work. This helped me!

@luisg_r6133 6 ай бұрын

Man I need help my lug 9 strip

@awesomedave8484 7 ай бұрын

Thanks for sharing

@JoeJoe-bz9nb 7 ай бұрын

Have fun we-blace de odring

@SahasraPaka-yw2rg 7 ай бұрын

Can I use without installing the batteries?

@thangatheone904 7 ай бұрын

No, this is low power DC, so you need the solar device and battery in it. You can also connect type c cable to solar device if you need to power on for more time.

@Motor-City_Ben-Diesel 7 ай бұрын

Great idea 👍🏼👍🏼👍🏼

@Experimentblack 8 ай бұрын

Nicely done!! It looks great

@Leo-zero711 8 ай бұрын

I bought the e80 and it wouldnt drop below 50% even tho I had it at a 45% target which meant it never turned off

@thangatheone904 8 ай бұрын

On high humidity day, it takes more time to reach 50 % , but 45% is impossible for me too. But 50 is better compared to 60%. I use calcium chloride method in addition to control high humidity

@Leo-zero711 8 ай бұрын

Does it ever go below 50%

@BLtheP 8 ай бұрын

Good video. I wanted to add and clarify that no, the wheel being mounted further in on the left side (newer) setup is not a problem with alignment. That is actually the proper location for the wheel. On the earlier setup, the factory composite rotors had a very thin mounting surface. When Jeep updated the bearings and the rotors to the new design, the new cast rotors had a thicker face, and so they made the bearing more shallow to make up for it. So the wheel ends up in the exact same place on both stock applications. Using new cast rotors on the old bearings actually places the wheel further outward than stock. It also makes the hub pilot for the factory wheels very shallow. To me, the ideal option for anybody with these unit bearings is to choose the later model bearing and rotors to match. This maintains stock width and keeps stock wheels registered on the pilot the best.

@philpernice4722 8 ай бұрын

brave man doing this barefoot

@christophermee6462 9 ай бұрын

Thank you

@iAmJankus 10 ай бұрын

Next level engineering right there

@bigc6812 10 ай бұрын

Nice man this helped me a ton thank you

@mischafellner8943 10 ай бұрын

Did it take you a couple days to charge up the battery?

@thangatheone904 10 ай бұрын

Not really, it gave 6 to 7 hours in summer, in winter just 2 to 3 hours, I didn't recharge the battery

@SahasraPaka-yw2rg 7 ай бұрын

@@thangatheone904But the batteries are mandatory or optional?

@theloudprofessional 11 ай бұрын

Thanks for the info

@StAnne07 11 ай бұрын

Great info. Thanks.

@cpsany Жыл бұрын

Thank you for the incense smoke idea. I'm wondering why you didn't route the pipe through the sidewall, as that would have required just one hole in the wall!

@thangatheone904 Жыл бұрын

2 reasons I didn't do through side wall 1) I didn't have a concrete 4.5 inch hole bit 2) I live in cold area so routing the pipe outdoor will create water condensation and some time ice block on top of the pipe and reduce the fan life.

@thangatheone904 Жыл бұрын

I explained it in the video at 3.00 minutes

@danm400 Жыл бұрын

I Iike the ideas you have, for putting the boards under the tires to get more room underneath for the drain pan, and also using aluminum foil to guide the oil to the pan.

@webstella Жыл бұрын

Great job!

@vijayasiddhanathan9443 Жыл бұрын

Super

@colinstreet6782 Жыл бұрын

Dope tho

@colinstreet6782 Жыл бұрын

1 seams 2 I like that ur working with plywood I’m sure this is a great method for things like stage sets and things that are not scrutinized under detail however if something is going to be furniture I rlly don’t think plywood is even a good idea

@evanxander7917 Жыл бұрын

The seams they're huge

@chonkitman8920 Жыл бұрын

my r6 was also like this. but no error code.... the EXUP close when high rpm and open when low rpm....... No error code but im going to fix it myself lol. i think that's bad for the bike performance

@godlugner5327 Жыл бұрын

NOT proper handling of a rented U-Haul truck!! you didn't drop the whole load all at once to wreck the bed and suspension 😂

@thangatheone904 Жыл бұрын

1) Board length - ( no of holes × diameter of holes) = total blank space 2) Total blank space / ( no of hole +1) = single space length 3) single space length + radius of hole -> first hole center 4) single space length + diameter od the hole -> second hole center