Can you update with a diagram how you installed the valve
@mandimayyhem2 ай бұрын
This is so wonderful! I'm not sure what I'm going to do, but this video is too notch with info. Thank you so much.
@josiec45366 ай бұрын
Do you have a video on how to replace and parts used?
@esmeraldadelcarmen_8 ай бұрын
You might not have the answer but my model doesn’t have these hot cold indicators. Do I just have to make sure I plug in the 12 V the right way?
@usasidekicks2568 Жыл бұрын
My 1st Igloo 18 can 12v cooler was about $68.99 and lasted 15 years - Igloo stop making it and had to buy a bigger one for twice the money and the POS didn't last 5 years - Not the same quality of Yesteryear - I got a RoadPro 12v bag this time for half the money - So far so good 🤞
@GUSTAVO-uy6ps Жыл бұрын
what if my light is flashing fast many times.
@ombeth Жыл бұрын
I wish someone would go over how to remove poison ivy from shoes. I'm going to try pouring alcohol on them and letting them dry, then probably going to throw them in wash machine on a low tumble. It keeps transferring to my ankles and lower legs. I stopped wearing those shoes and it went away but I would like to keep using them for yard work in the warmer weather, instead of throwing them out.
@DLeighWifey11 ай бұрын
That's what I'm looking for also. Did you find any answers?
@shroomzzz3 ай бұрын
New shoes...it's the only solution I found. You can try washing them in Hot washer with dish soap, but it's only moderately effective.
@MrBlacJack1 Жыл бұрын
Tyyyyyy❤
@sylva5359 Жыл бұрын
This gave me the information I needed. Thank you! Portable GE dishwasher
@h-mkoch9721 Жыл бұрын
What is the identifying info or part number of the Peltier Chip?
@porterfamily789 Жыл бұрын
I thought my code was Fed but it might be Ftd (failure to drain)
@sl5311 Жыл бұрын
Where did you get this sheet?
@earthn144711 ай бұрын
It is under the front behind the panel (kick panel) under the door- take out the two little screws, then look on the left side - folded into a 2” square tucked on the side by the foot
@sl531111 ай бұрын
@@earthn1447 Thanks, I think mine was taken.
@justplaywoman22 жыл бұрын
fuuuuuu k summer time ground hard / spring ground wet soft I got a 2" pipe in solid ground already ripped up 1/4 metal & 18" pipe wrench
@justplaywoman22 жыл бұрын
summer time 25' sand point galvanized steel
@NYtulip2 жыл бұрын
Man this guy rants so much nonsense. Just come to the point
@TheArizonaOutriders2 жыл бұрын
Great job, we are in the process of pulling our deep well pump in AZ. 600' yeah, our water is deep. I'm thinking of posting a video on The Arizona Outriders. There are a few off roaders who have stolen my name, but search and you will find. Give me a few days after Sept 4 2022
@kennethrodrigues43712 жыл бұрын
Thanks for the video. I took mine apart to change the thermal grease. There is a thick black sealer between the peltier cooler and the body of the cooler. Anyone have any recommendation on what to use as a replacement when I put it back?
@RIZZO0372 жыл бұрын
How do i find Service Diagnostic Sheet. nothing that i can find under machine. Please help?
@freedomaintfree10302 жыл бұрын
I have a 72' well that hasn't been used in 30 years. Want to get it working. 2" galvanized with a 1 1/4 intake line. Thinking check valve may need replacement but now, after watching your video, point may be rusted out as well. Should I just hook up a jet pump and see what happens? Need to pull intake and replace check valve? Rust and corrosion ruined the whole thing? Thoughts anyone?
@wildswan221 Жыл бұрын
Try the jet pump. You might get lucky. We had a similar situation and it worked fine. Pulling all that stuff out is a pain
@freedomaintfree1030 Жыл бұрын
@@wildswan221 Thanks! I've pulled the check valves before and it is a lot of toil and sweat. I'm gonna try setting up the pump and see what happens. Like you said, maybe I'll get lucky! Thanks again!!
@joewhitehead82112 жыл бұрын
Where can i get the replacent motor that. Has a shaft in each end? Coleman. No longer. Has the.
@komafoxy10192 жыл бұрын
12 volts plus website
@amyhayes16472 жыл бұрын
could someone possibly send a link or a screen shot of the service diagnostic sheet ? I have the manual but the diagnostic sheet in nowhere to be found.
@morgandodsoncoaching Жыл бұрын
I found this one but it wasn’t my exact model but it was close enough, it might work www.applianceaid.com/pdf/31_9253.pdf
@farmfitnesspham49132 жыл бұрын
My well have a house like it inside a little house it not in open air outside
@farmfitnesspham49132 жыл бұрын
Yes I am been looking for a video like your thanks you very much
@chevyguy25362 жыл бұрын
On mine the door controls are dead ,nothing. the main control board led is flashing so fast the light just dims a little, any help please
@coolthingzbruhh52522 жыл бұрын
I dont have the foam on the outside fan, does it matter
@reeol12 жыл бұрын
You can wire it directly into the thermostat , you can wire to the furnace board
@kevinor6776 Жыл бұрын
That's what I want to do! But it seems like a difficult task.
@BrettHoustonTube2 жыл бұрын
Do you know what that little thing attached to the peltier is? It's covered in black goo. Right next to the module by the heat sink. I just replaced mine but the new one didn't have it. Should I use that with the new one or toss it? Thanks
@chrisandnolenej2 жыл бұрын
Hi. I replaced my Peltier module and it gets hot/cold...but it still doesn't cool the cooler? Any ideas why? I used the thermo-grease, but maybe it was too thick?
@Airdaddy552 жыл бұрын
GE make a piece of crap. I paid 800 for this piece of junk. I have had nothing but problems. Changed board, upper board is also bad. My old dishwasher was 12 yrs old. Never had ptoblems other than maintainece. GE sells crap, dont waist your money.
@stevemcqueen90393 жыл бұрын
Brilliant !! just fixed my Mitsi L300 with same issue. many thanks.
@defomatt26843 жыл бұрын
What if you get no lights up on top at all, I did confirm I am getting 115v up to the top of the door.
@Kogitesolar3 жыл бұрын
Please which direction is the inner and outer fan turning?, Clockwise or anti clock?. Thank you
@iaminevitable9363 жыл бұрын
Mow powa baby!
@PH-md8xp3 жыл бұрын
Thanks for sharing this video. Very helpful. I have a different GE model GDF620HSJ6SS and have a similar sheet of error codes and things to check. In my case, all of the control panel lights suddenly went off and no combination of pushing buttons simultaneously has any effect on the dishwasher, it’s like it’s dead :( so I called for service. The technician checked the washer and concluded that either the main control board or User Interface (UI) board is bad and advised me to just get a new dishwasher because the replacement boards work for a few weeks and quit ! Now after watching this video, I’m motivated to check the main control board and see if there’s any sign of life, I don’t believe in simply discarding a 3 year old $700 appliance without a bit of a fight!
@OzSkyking1523 жыл бұрын
My dishwasher has a problem where the top panel lights and controls stopped working. The main board has 120 volts power going in and it has a steady green light. It also has the 13.5 volts DC current going out to the top control board . I am still trying to get an answer on the correct part needed but I think it might be the top board.
@bernadettewoods46912 жыл бұрын
Did you get your GE dishwasher going? We have same problem! UHG
@robertirby50593 жыл бұрын
Well that 30 mins of my life wasted, I just wanted to know why my plugs not working, didn't need to know your beer story.
@evanweimer16273 жыл бұрын
How did it work?
@HimsinBoston3 жыл бұрын
My bottom circuit board solid green, bottom of machine controller board. But my buttons don’t ON. No power to up buttons, which board is dead? Top one buttons or controller?
@superwave333 жыл бұрын
Can't believe 25% of people who viewed this find it bad - I mean, if you don't like it, don't bother rating it and make your own and see if it's any better! Good job Howie.
@michaeljdestefano12083 жыл бұрын
Great camera work, very informative video. Thank you!!!
@jheighten75683 жыл бұрын
I have this one. I was told that i needed to put a bag if ice or frozen water bottles in order to cool. Is that true or is this supposed to get cold without any ice in it?
@hotrolls34733 жыл бұрын
The service LED light on my GE model GDT695SGJBB is solid green wether the door is open or closed so I bought and replaced the UI board (WD21X23463). It did not fix the issue. The issue being, no lights or functionality of the UI touchpad. Dishwasher is not working at all. Can you help?
@nobodycares23542 жыл бұрын
So if that didn't work, guessing it was the bottom one that needed replaced. Did you ever figure it out?
@hotrolls34732 жыл бұрын
@@nobodycares2354 it turns out that it was the top interface board. It needed to be programmed. I ended up having to call a technician to program the board I had installed.
@spookville6632 Жыл бұрын
@@hotrolls3473 Yes I believe there are a few jumpers in a row that need to be placed in the right position (jumpered or not jumpered) although according to what you wrote it sounded as though the bottom control was defective> depending on the model the green led lite should be a steady flash or a double time flash (where the control PCB is square shaped)
@hotrolls3473 Жыл бұрын
@@spookville6632 The board manufacturer did not install the jumpers during manufacturing. In addition, my board needed a software update so I had to call a technician who plugged into my board and installed the update.
@judylepthien98913 жыл бұрын
I see several people have the same problem I have and that is getting the service diagnostic sheet. Where did you get those. I called GE, emailed them etc and they say they don't have them, so I am wondering how you got them? Please reply.
@PH-md8xp3 жыл бұрын
Hey Judy, I found my service diagnostic sheet tucked into the left foot of the dishwasher, it was visible after removing the kick plate. Apparently the manufacturer places it there.
@BizzaroBrainBoi3 жыл бұрын
howie thank you so much
@jec_ecart3 жыл бұрын
Good information
@bkmodelcars3 жыл бұрын
Okay so where do I find the video where you put it back in
@robertparsons97693 жыл бұрын
How can I get a replacement sheet like that?
@danaraemiller3493 жыл бұрын
I have the GE GDT680 model. My heating element is not working. I replaced the element, but that was not it. The user interface board they sent me has a "personality jumper" that has to be configured. I ran the test you showed by holding down the cycle and start. They all blinked and the only ones left on were the "autosense" and "lock controls". What does that mean? Also, do you know how to set the jumper on the new board? It's Christmas eve and I could sure use the dishwasher... ;)
@wayneo72203 жыл бұрын
Interesting both heatsinks are the same size. The cold side is usually much smaller than the hot side.
@MauricioRNavas3 жыл бұрын
I want to install a duct fan since one of my bedroom get less cold than the other one can you direct me how should I wire it Thank you!