rc mustsee

Пікірлер

@AsurasWrath164 Ай бұрын

This guy doesnt have the slightest amount of steering control. Letting of the wheel every second and letting it bounce into center sounds terrible.

@rcmustsee437 Ай бұрын

this was the very first kit i ever built and i had just gotten into the hobby. i can assure you that that does not happen anymore. thanks for noticing.

@RCRoads Ай бұрын

Fantastic job. Your videos are quite motivational. Awesome U4 and location.

@rcmustsee437 Ай бұрын

Thank you for the kind words!

@RCRoads 3 ай бұрын

Sorry to see you broke something so fast on the U4. I've been quite lucky so far and haven't broken anything but a front bumper. I sure like the awesome footage of the MAXX.

@rcmustsee437 3 ай бұрын

@@RCRoads overall it’s a fantastic car. A few weak spots that need to be dealt with but when it’s running i don’t think there is a better performing u4 rig on the market today. Check out the rest of my lasernut vids. Thank you for appreciating the slow-mo maxx footage!

@RCRoads 3 ай бұрын

@@rcmustsee437 For sure! I try to run my cars until something major breaks. I get worried about the diffs blowing out like everyone claims. So far I think 3s is probably the best choice. Very enjoyable RC to drive. When we make video's we want them to be all rad and exciting but then we push our rigs too hard and they break.

@edwincordero8 4 ай бұрын

Which you think would be more efficient, 12T/33T or 13T/33T front overdrive?

@RCRoads 5 ай бұрын

Very nice setup. Thanks for filming the install as it helps me see how stuff fits together. Vitivon parts are the best. Kind of expensive for some but the parts you went with are really the most important. Anyways I'm just a Lasernut enthusiasts right now and just love mine even in stock form but slowly as it breaks I'll probably do some Vitivon upgrades. They even have some beadlocks rims designed for the U4 and they look tempting as well.

@stefanierogers5715 6 ай бұрын

Do you know if I can race my rc rustler 2wd vxl in any rc race.

@RCRoads 6 ай бұрын

Bummer about the short axels. I'm ending up with lots of tires that don't fit any of my cars. It's food to know that the axels are short and it will be a problem. I have the same issue with the Redcat Everest 10. Short axels are a PITA. I might go with some 17mm adaptors and see if I can match up some tires that way. Proline Trenchers mount up ok on my lasernut but I'm looking for something taller like the stock ones.

@rcmustsee437 6 ай бұрын

They make the hyrax specifically for this truck. I have them and they rip. They will fit the stock wheels or vitavon has some a awesome beadlocks.

@RCRoads 6 ай бұрын

@@rcmustsee437 Thanks buddy. That really helps. Enjoy you fun with this awesome setup. 🏆👍

@joshleyba3854 8 ай бұрын

Those front tires really dig in and pull that Nut through the turns😮

@rcmustsee437 8 ай бұрын

they sure do! pretty fun in the right conditions. thanks for watching 👍

@Fallenicons24 8 ай бұрын

How have they held up

@rcmustsee437 8 ай бұрын

i sold this truck to my buddy years ago. but he still uses the slash and all the dogbones are still in great shape- highly recommended.

@michaelprather-662nd 10 ай бұрын

Cool

@Tuidkskiwjdhdbd Жыл бұрын

Are your diffs locked in this video

@rcmustsee437 Жыл бұрын

No. 500k center and i think 50 f/r. The beauty of the lasernut is the fact that you can adjust them- which is important for rock racing. Not the best for crawling off that’s your goal. I would build an independent front/ solid axle rear rig for more hardcore 4x4 action!

@Tuidkskiwjdhdbd Жыл бұрын

@rcmustsee437 yea I Have the yeti and ryft but I got smoke by a guy at a hill climb with a losi the all around independent helped him alot my yeti is sick has tekin mamba x sensored system it rocks but I want a independent front and back rig. steering sucks on yeti I'm sure it's not much better on this but we will see

@rcmustsee437 Жыл бұрын

the steering is great @@Tuidkskiwjdhdbd but you have to buy an upgraded steering rack right out of the box mine broke in 10 minutes. throw 500k - 1M k. in all 3 diffs you will have a mean machine.

@Tuidkskiwjdhdbd Жыл бұрын

I just ordered one my plan is sensored system and lock all the diffs for hull climbs only any maybe trail crawls with other crawlers like at beat the creek a big rc event I go to I just wanted to know if you can think of any problems I'm going to have I love my ryft and yeti but I think this could be really special

@chromemondo Жыл бұрын

Dope video! What compound and what wheels are you running with these Flings

@rcmustsee437 Жыл бұрын

Thanks for watching, they were the softer compound they offered and the wheels were proline i forget the name but they are made for the fling kings and come with 3 different hub with options

@chromemondo Жыл бұрын

After running it, do you still think u should have went with the harder compound

@rcmustsee437 Жыл бұрын

@@chromemondo not sure but overall the soft work very well.

@af8lbite205 Жыл бұрын

Where’s nitro?

@rcmustsee437 Жыл бұрын

No nitro at this event.

@barceloni1984 Жыл бұрын

It's a pretty cool car, I have the black one. It's been great over the years. Completely stock, besides a slightly bigger pinion gear. Haven't had any issues with it. I do wish I could find a replacement body and tires tho. Mine is starting to crack and is riding on slicks now. 👍👍

@barceloni1984 Жыл бұрын

Nice run. I just sold 2 old crawlers and got a used RTR Rock Rey last week. Haven't had time yet to thoroughly test it out. Can't wait 👍👍

@rcmustsee437 Жыл бұрын

i think its a cool truck but i let it go a while back. too annoying to work on and unfortunately it doesn't perform very well. get a Losi Lasernut!!

@barceloni1984 Жыл бұрын

@@rcmustsee437 I really enjoyed thrashing my Baja Rey for the last couple years. I already have a bunch of spare parts laying around. My Baja Rey is about done, hanging in the garage now as a trophy. I mainly wanted something as direct competition for my Yeti.

@trucker5455 Жыл бұрын

I just broke my Lasernut exactly the same way on a cold day. I noticed that the arm that broke makes contact with the corner of the servo at a full right turn. I'm gonna set the steering end points a degree or two short of full lock. I think the cold may have contributed to the plastic being more brittle. On a hot day it may have bent instead of snapping.

@rcmustsee437 Жыл бұрын

It’s a weak point in the steering, that’s for sure. The plastic part is just a bit too weak for what the truck and big tires demand, especially if you put a better servo in like i did. Thanks for watching!

@thomas23345 2 жыл бұрын

Hey man I want to tell you that you are a great influencer for traxxes

@rcmustsee437 Жыл бұрын

Thanks?

@TheAmericanUhate 2 жыл бұрын

Can the under-drive for the rear also fit the front axle? I'd like to under-drive front & rear both. Lower drive train ratio with slightly higher spur gear ratio would improve smoothness in my theory lol. Plus it would reduce stress on the transmission, drive shafts to the trans, motor, and esc.

@rcmustsee437 2 жыл бұрын

Yes i believe they are interchangeable

@miller038 2 жыл бұрын

I been there

@DashcamLessons 2 жыл бұрын

Thanks for the video! Featuring it in today's one.

@Deviousone4life 2 жыл бұрын

When decending down a hill you got to be careful while having the upgrade you will have your rigs front end pulled over front right underneath you causing you to indo into a front flip. Also when side trailing it will hard cause the rig will want to pull to the side making it hard to keep a straight line. Overall pretty good upgrade

@thomasnash167 2 жыл бұрын

Good job dude keep it up

@WrightInvestments 2 жыл бұрын

Yoo thats crazy that Scotty is still around. I used to go up to the shop he used to own called trackside in Milwaukee, WI all the time as a kid. When I would break parts and stuff he would look out for me alot. He made my Rc experience one of a kind, im glad to see hes still in the RC space.

@standforjesus7427 2 жыл бұрын

I love it grown men playing with toy trucks....I wanna play

@Wanted1069 2 жыл бұрын

Need those shims.....

@weswes1294 2 жыл бұрын

Came to your channel again now that I’m back into the rc car hobby. Pulled out my jlb cheetah after 4 years of it sitting in my closet (accidentally sunk it in salt water at the beach which obviously messed it up), but I just got it running a couple days ago! Keep making vids man!

@julianmarkarian3001 2 жыл бұрын

what did you use for the mesh over the esc?

@rcmustsee437 2 жыл бұрын

some scale mesh i bought on amazon i think

@julianmarkarian3001 2 жыл бұрын

Wait, you didnt use any shims in the rear??? mine feels like it has a bunch of backlash if i dont use a buttload of shims.

@tristanw9008 9 ай бұрын

Julian I found you on yt lol

@stingennettle3343 2 жыл бұрын

I wish my local hobby town had stock of this amplitude, they hardly ever have a matching set of tires, or popular rc vehicles in stock.. smh

@dizzychizzy1 2 жыл бұрын

Thanks for the effort champ… I appreciate it as I’m trying to get into rc 1/8 racing and trying to get as much info as possible through the net… will vist the track as soon as I have a trug or bug built…

@steveruta8746 2 жыл бұрын

What tires worked the best on that track?

@rcmustsee437 2 жыл бұрын

i allways loved the ss proline buckshot. buggy and truggy. if you have the skill to keep it in traction a tighter pin tire is better

@DaveCraige 2 жыл бұрын

Nice vid

@FromthePits 2 жыл бұрын

Great vid, I've always wanted to go to Motorama, always been a bucketlister since getting back into the hobby.

@rcmustsee437 2 жыл бұрын

if you enjoy electric its worth the trip. Thanks for watching

@gleisonqueiroz6541 2 жыл бұрын

Amigo as engrenagens dos diferenciais dele são duráveis ?

@rcmustsee437 2 жыл бұрын

nunca tive problemas com os diferenciais

@distilledmilk2441 2 жыл бұрын

Show the crash that broke it so we know what not to do

@rcmustsee437 2 жыл бұрын

it wasn't a crash actually, it just broke while driving. unfortunately i didn't get it on camera. Had i had a big crash i would have understood the break.

@tojo3507 2 жыл бұрын

Shame on Losi??….How bout shame on RC MUSTSEE….plastic parts do not fare well AT ALL in cold temps. Not Losi’s fault.

@rcmustsee437 2 жыл бұрын

I have driven many rc cars much harder in colder temps then this and they did not break in 5 minutes. def cheap losi parts.

@sunoncream1118 2 жыл бұрын

@@rcmustsee437 yeah you right... for me that was 3 full gaz on 4s (tatu 800mah 130c burst) on road then rear diff death ... didnt figure out if that was case or ... diff dont look damage maybe that need shim and bolt and nut allway down the case (m3*70) and same replacing arm rod with m4*75 bolt and nut? upgraded bearing for the diff also i saw it need...

@sunoncream1118 2 жыл бұрын

no shame on losi.. the lasernut have many fail point... (me 3 ful gaz on 4s small drone battery an rear diff death not normal.. rated for 4s mean not broke like that... (ive do launch control with mini8 for 2 year no damage .. mini 8 good car.. lazernut good concept but out of the box not good)

@syncroG60golf 2 жыл бұрын

What esc? Didn’t think they could run on 2s

@rcmustsee437 2 жыл бұрын

yep. 2-4 s but 2 is laughably slow.

@rcplaytime 2 жыл бұрын

Way to expensive, disgraceful 😔😔 if only losi built the awesome lasernut better😔

@rcmustsee437 2 жыл бұрын

idk about disgraceful... they are custom machined high quality parts that come from the other side of the planet! You get what you pay for. def not in everyones budget, that i understand. And I agree with you about the lasernut. a shame it lacks durability out of the box. overall its a killer vehicle tho, happy with the purchase. thanks for watching.

@BrianW2979 2 жыл бұрын

I know this is an older video, but for whoever watches this and is attempting this mod, there is an easier ay to deal with the steering linkage when removing the front part. Turn your wheels to the right or left (not sure which way, but you will see) then through th holes in the bottom of the chassis, you can get to the screw that attaches the linkage to the steering servo horn. Undo that srew and the linkage comes off easy when you remove the front bulkhead.

@chadanderson2486 2 жыл бұрын

No nitro?! Booooooo!

@rcmustsee437 2 жыл бұрын

Yea electric only at this event. I don’t miss the fumes! Thanks for watching

@roberttannenbaum6779 2 жыл бұрын

Thankx for the great vid

@AndrewKellman 2 жыл бұрын

My shock mount (the gold piece) always bends if I land hard on the back. Do you know of a way to reinforce it?

@rcmustsee437 2 жыл бұрын

unfortunatly there is no fixing that. you would either need to just buy a replacement (they are very cheap) or see if there is a machined upgrade. the one that comes on the truck is a cheap forged part.

@rcx8971 2 жыл бұрын

Seen my buddy buggy racing

@Johney_Nomadic888 2 жыл бұрын

Great video. Finally, someone that can drive!

@kevinmoore994 2 жыл бұрын

I’m dying to buy a Lazernut but being brand new to RC I don’t have the confidence I can do the pre-first run check over to make sure everything was assembled correct or the needed parts replacement (although your video on the Vitavon parts install was great). Seems like a car for the more experienced. Bummer its not more reliable out of the box, especially for that price. Great to see the Baja Rey did so well though as that’s my option. The gum chewing didn’t bother me…

@rcmustsee437 2 жыл бұрын

The only way to learn is to challenge yourself. I say go for it. Overall this buggy is really really good. Thanks for watching