TylerThePlowGuy

Пікірлер

@donkeyman1683 4 ай бұрын

I just bought the same plow. I’m using it now and hit a rock and it tripped for the first time since I’ve used it. Your video was very helpful. It taught me how it works and how to fix it. What did the old farmers do without KZbin or Google. 🤣 Thanks again for the great video.

@texmetzger 9 ай бұрын

Listen to that 31HP 430W Snort!

@nicratliff6596 9 ай бұрын

Great video! Thanks for sharing. One safety trip on the forward most bottom of my 3-bottoms e-8450 plow is not staying engaged and immediately trips back when moving forward again after hitting a big rock in my field. On quick inspection, nothing looks bent or broken or different than the other bottoms. What would you suggest I look at next? Thanks!!!

@barnycanuck6234 Жыл бұрын

That work for 5020's as well?

@MikeyShumy Жыл бұрын

Thanks for the video! I have only recently started participating in some of the local plow days in my area. I am in the process of purchasing my first mechanical trip plow which is a Deere 55 plow (not sure on exact details of it yet), but it is a clutch trip. I was very hesitant on getting a trip clutch plow and/or converting one to hydraulic since my red tractors do have hydraulic capability. But thanks to your video, I now feel completely comfortable keeping and maintaining the original clutch system on it. I was completely oblivious on how simple these trip clutch/cams really are. Thanks again for the amount of info in this video, and for taking away the "mystery" on how the trips really work on these plows.

@jeffgillette3364 Жыл бұрын

I have a John Deere 55h moldboard plow do you have any bushings for the rear wheel there's lots of play back and forth about an inch maybe a half inch but I think it's more like a inch and a

@jeffgillette3364 Жыл бұрын

Do you have any suggestions

@donmesman568 Жыл бұрын

I got it figured out. "Till guard" Thanks for the info

@donmesman568 Жыл бұрын

I cannot pick up what you said the product you are using to spray moldboards. would you spell it out please

@derfvader6951 Жыл бұрын

or the cheapest spray enamel spray paint you can find, the cheaper the better

@bobocaterpillar3697 Жыл бұрын

when you're done plowing, PAINT the moldboards with primer then cheap rattle can metal paint. keeps them from rusting away. mine sit outside all year and next time i use them, after the paint wears off, they look brand new.

@BoysInTheWoodsofPA Жыл бұрын

How does a guy identify the plow model number on a set of these old plows? I have a set of 3-14 JD plows very similar to yours, would like to get a positive ID on them?

@bueno7052 Жыл бұрын

Thanks for your clips on these old plows. With your info I was able to disassemble and reassemble a #44 and turns out (yes-pun intended) it works. I'll be looking for more info on how to get axle shims and the clutch kit and other miscellaneous unicorns. Field day is today so wish us luck.

@mom_im_losing_it Жыл бұрын

Damn sucks he’s going to have cancer and Wiese isn’t going to pay his medical bills.

@bncollector Жыл бұрын

I need some help. But I can’t figure out how to contact you

@mcdowellfarm23 2 жыл бұрын

Great class!

@calvin1926 2 жыл бұрын

where can i get shims? I've tried looking on the internet and cannot find anything.

@norbertoroger4399 2 жыл бұрын

Spectacular !! "John Deere" 720 👍👏💪💚💛🇺🇸

@thedeadender5486 2 жыл бұрын

Remember back then when you could whoop your children to do the job for free

@ExploringCabinsandMines 2 жыл бұрын

So I picked up an old JD 4 bottom 3 point plow with no coulters. how will this turn sod over without coulters ? I was considering buying some 1 1/2 in rod and mounting them in the old clamps and sharpening the edge just to score the sod first , crazy ?

@tylertheplowguy8690 2 жыл бұрын

It may work but will likely not be nearly as good as a rolling coulter.

@ExploringCabinsandMines 2 жыл бұрын

@@tylertheplowguy8690 Agreed but the cost of 4 used coulters is more than I paid for the plow. without them will the plow blades rip the sod and leave a jagged mess ?

@Scott2510A Жыл бұрын

Without coulters, your plow will likely clog up often and terribly. The 1 1/2 in rod idea in the old clamps will most likely break all of the old clamps and will clog up. Try finding used coulters at junk yards in your area or put an ad in the wanted adds. Until you find coulters, disk the area you want to plow first or rotary mow and disk to chop up plant vines. I plowed 10 acres the other year. Started with notched coulters on the plow. The notched coulters kept getting wrapped up with vines. I could only go about 100 yards and the plow was clogged up terribly. Subsequently, I rotary mowed the entire field and changed the coulter blades to the plane round type and adjusted the coulters per the book. Went back to the field and no more problems with clogging. The plane round type coulters cut the vines like a hot knife through butter. Plowed 10 acres with the JD 620 in 3rd gear and F145 3-16's. @@ExploringCabinsandMines

@maisyholly 2 жыл бұрын

Will sandblasting moldboards work ?

@kdwalmsley 2 жыл бұрын

Very useful and informative video, thank you.

@bradwiebelhaus7065 2 жыл бұрын

Good video.

@AnglesideFarm 2 жыл бұрын

Good to know! We’ve always used grease as you mentioned

@levismith8245 2 жыл бұрын

Hey there Tyler I was watching the 1952 B cutting hay and I have a question does you're B have a RPM gage and if it does how would put one on a 1952 B without one installed any help would be appreciated 👍😉

@BlueGiant69202 2 жыл бұрын

How about vegetable oil? Not quite as messy as grease but not as easy as the method shown in the video.

@rossr277 2 жыл бұрын

Where do you get parts for those?

@markconner5175 2 жыл бұрын

Where do I get parts for the vintage 415a john deere plow 2-16?

@derweibhai 2 жыл бұрын

I think the cast case on my 44 clutch was damaged by ice. The gasket mating surface has gaps and appears that it has been bent. Is this common? Can a replacement case.be found?

@jeffgantt5975 2 жыл бұрын

Like your videos, I found a 416-14" that had been in the fence row for over 30 years last summer, plow is in excellent shape for S.Ga and never been inside. New set of shares from JD parts and put it to work. The trips not even rusted up and the moldboards still have the little metal tags on them.

@stanhensley3082 2 жыл бұрын

Thanks ☺️

@alancarter3166 3 жыл бұрын

Hey man! thank you so much for the Video. Helped us a ton. The bushings for this have been rendered obsolete and I am looking for some. Where did you get yours?

@kristopherperritt1974 3 жыл бұрын

Thanks for this video! Saved me a lot of time tonight!

@hillbilly918 3 жыл бұрын

Pull that thing through the ground a few minutes and it'll shine like new

@c.carney1948 9 ай бұрын

Yes, that is all I do. A couple passes and it is shiny.

@bw1895 3 жыл бұрын

Hey, can you contact me I need some assistance identifying a POSSIBLE John Deere 2 bottom trip plow

@roycevanroekel344 3 жыл бұрын

Thank you for this video, very short, but very helpful to someone who knows nothing but am getting into using a plow. Thank you!

@sjrsloan 3 жыл бұрын

i need one of those kits for john deer trip plow closed clutch,how can i get one

@tylertheplowguy8690 3 жыл бұрын

mrbtractors.com and fill out a contact form.

@sjrsloan 3 жыл бұрын

@@tylertheplowguy8690 yessir i did today

@RJ1999x 4 жыл бұрын

Why wouldn't you just buy the pioneer 9500 lever couplers and bolt them on, and get rid of the John Deere crap

@America-First2024 3 жыл бұрын

What is the number for the hydraulic hose tip for the 9500?

@RJ1999x 3 жыл бұрын

@@America-First2024 not sure without looking, but it's just the standard pioneer end

@randyrobinson8751 4 жыл бұрын

You should come plow at rollag Minnesota Tyler. It's the most awful stuff on God's green earth to plow

@rociocaudillo1339 4 жыл бұрын

Uggg cbhjv fu cuhchucvhhvghvccchh

@bluefirevburen8386 4 жыл бұрын

you must have done something wrong. I've had the jd iso kit for years on 2 tractors,no leaks! how did you keep insert from turning when 1 1/4 coupler was tightened? cost?

@Iowagrown123 4 жыл бұрын

He said there's a groove at the bottom of the housing, to keep barrel from turning.

@jasonpatterson2985 4 жыл бұрын

Such a great amount of information thanks

@michaeljeffcoat9096 4 жыл бұрын

Many thanks for your time and effort. I was stuck and had no idea that KZbin could help me but it (YOU) did.

@Sgt_Kilborn 4 жыл бұрын

Looking good! Have you ever considered covering JD disk plows? Not a lot of good content on KZbin about them

@lloydhenning9567 4 жыл бұрын

after a period of time now. how do you like the Waspi /Grove conversion on your tractor?

@danw6014 4 жыл бұрын

I always wondered how they were made.

@mikecarpenter4821 4 жыл бұрын

Do you have parts for a John Deere 614 single bottom plow

@oby-1607 4 жыл бұрын

My parts guy told me there is probably more oil leaked in the fields by farm equipment than any amount of cars on the highway.

@Iowagrown123 4 жыл бұрын

I'd put money on it. Lol

@nedraarsenault9297 4 жыл бұрын

I have a 1030 John Deer Lost all hydraulics working fine and all of sudden quit. what do you think. changed the filter still nothing.

@dbob8800 4 жыл бұрын

You have pump failure

@tobysavage1278 4 ай бұрын

Your stroke control valve is probably stuck. Take it out and free it up before replacing pump

@johndeere1951a 4 жыл бұрын

Priceless experience for that youngster! My uncle Eddie let me stand in front of him when I was 6 in the mid '50's, on his JD 1951 model A. I have an A today that I ride in my late 60's now. My uncle rides in my heart. Very emotional stuff. Bless the souls on D-Day beaches this weekend.

@nilslange2229 4 жыл бұрын

Looking for a plow share for my NO. 44

@iqcomposite 5 жыл бұрын

Use plastic mouldboards instead

Ең жақсы KZbin

Пікірлер