Wish I'd watched this sooner! Would have saved me a lot of time. All the info in under 5 minutes. Bravo!😊
@macmac32818 күн бұрын
How do I get the part to remove the crank?
@winterwolf201215 күн бұрын
Got a new bike today, no power anywhere. I am already sick of the e bike scam.
@beavermonk112 күн бұрын
Same thing just happened to me too
@winterwolf201212 күн бұрын
@@beavermonk1 Found out from watching KZbin the factory forgot to connect all the wiring. The bike was not plug & play ready. Corrected the problem & the bike runs great now.
@beavermonk112 күн бұрын
@winterwolf2012 You're lucky. I bought a totem bulldog and she looks so beautiful but all my connections are good and I either have bad charger or a dud battery. Smh. This was a replacement for my last ebike that was an aostirmotor which it's handlebars broke at the weld and almost killed me 2 times. So frustrating. Glad you got your bike working. I was so eager to test the stronger motor I bought and I'm crap outta luck so far 🙃 😅 😎 Enjoy your new ride dude
@Supercola31618 күн бұрын
Ahh I don't mind either way I always keep my phone charge xd
@raymondkelly959918 күн бұрын
Now where do I buy the tools or kit.😊
@raymondkelly959918 күн бұрын
Awesome thanks for the update and information. 😊😊😊😊😊😊😊
@maltinamaltina266521 күн бұрын
Alert: JetSono = SCAM
@monchy2523 күн бұрын
The input fuse controls the charging part of the e-bike? Meaning if the input fuse is blown it won’t get into charging mode?
@monchy2523 күн бұрын
Is this the same type of battery on the Ride1up cafe cruiser?
@jan-olofharnvall876024 күн бұрын
Thanks👌
@alanmorgan138928 күн бұрын
What grease for the planetary gears I wonder? Maybe nothing with a petroleum base as I'm wondering about any reaction with plastic? Personally I'd use fresh thread locker on the plate bolts and also some sort of non-hardening sealant between the hub plate and main body.
@geodez8626 күн бұрын
У меня лежит новый мотор G.063, я осматривал его и заметил клей. Потрогал ногтем и это было похоже на мягкую полоску резины-клея между крышкой и основной ступицей. Похоже это какой-то герметик с завода. А фиксатор резьбы очень сложно выкрутить, его придется нагревать до 200°С
@PaulChapman1bz2 күн бұрын
Thread lock comes in different varieties for different applications
@briankeightly336128 күн бұрын
iam getting 12w error on my screen , my bike was in bad weather snow rain slush and salt , its a current sensor error , can anyone tell me what i need to do my rear motor is sputtering not going to thre right speed , front motor is fine , any suggestions , can you post on here
@egilsjolander77929 күн бұрын
If the axel is threaded, please put a nut on before hammering. It will protect the treads;-)
@DW-nf9qeАй бұрын
1:06, please tell me that is all Celsius. I'm scared to bike in anything below 45. If that is Farenheit? Thats extreme, even for me.
@임일균-x5gАй бұрын
A liberty by bicycle.😊
@nedkent5239Ай бұрын
Thank you
@firestaralive3Ай бұрын
How do you know when to grease it up???????1 I have one that I bought 2 months ago and I have 200 miles on it already!!!!!!!1
@AdiCicirean5 күн бұрын
The hub motor is to noisie and it has to be greased.
@JakubSKАй бұрын
But how in the world would a pin just mysteriously become bent? It would have to be inserted that way…
@garyholloran6279Ай бұрын
Hi I have a dyu electric 250w foldable compact ebike it’s fully charged 4 bars but when I go out on it goes off dies on me all bars go i did get court in the rain ont time that’s when it cut out but playing up since I have not long had the bike two brand new it is or some times I have to take charger out put it back in then 4 bars come back up so wen I go to push it to take it out it’s dies then all bars go off not sure what it is think it could be my back tyre an some times I pedal it the bars come back up might stay on for five mins or so but happens again ?
@kevinohara3476Ай бұрын
My bike does something very similar, the drawdown when under load can and will cause the bike to lose power assist when I am riding it. I can drawdown from 6 bars to 0 bars and the bike will quit on me. I/Rize added a 2nd battery to compensate for the drawdown, now I am getting 90km+ in range, but once I start to get down to 50% bars I need to get it recharged to avoid pushing
@shodenАй бұрын
First saying it will damage your phone then you can use it for other devices, pointless video. I think it's just to promote their power bank.
@curtislake352Ай бұрын
Can't get any
@roncooke2188Ай бұрын
you say grease what grease is best. great video
@roncooke2188Ай бұрын
Nice hammer but it’s for removing nails
@alii7851Ай бұрын
My rq20 dosent work because I cut the light of please if anyone could help me reply
@HyperKilljoy112Ай бұрын
Very informative tutorial on opening up the motor hub. I have a Rad Runner Plus. Aside from the basic maintenance routine I perform like checking the air pressure, tuning the brakes, and occasionally replacing the tires. I hardly dabble with the motor hub because I’m painfully aware of how much they cost to replace. That being said I typically leave that part alone and never mustered up the courage to open them up and reassemble it. I’m now at the two year mark of owning this bike and I want to give it a proper tuning session. Giving it a nice clean and adding some much needed grease. Only thing I have left to learn is understanding the wiring mechanism and hopefully one day override the speed regulator/limiter and be able to go faster.
@BigStankyFishАй бұрын
1:57 oh thank goodness
@michaelsmithyАй бұрын
how to turn off pedal assist
@JamesLeremАй бұрын
Don't pedal..🤨🤷
@netog4260Ай бұрын
Most torque sensors pedal assist ebikes behave like cadence assist during start including Rize which I test ride. It require initial movement before it allows the motor assist. During start facing uphill you don't have assist unless your strong enough to make the initial move.
@Имбирнаяпеченька-ю6ьАй бұрын
Bottled water is fine, but it's gonna get cold if not freeze even in your backpack, and especially in your bag anywhere on the bike. So I'd highly recommend getting a vacuum flask at least 0.5 of capacity and keep there hot coffe/tea/cacao with some sugar/honey (any other sweetener that has lots of carbohydrates to give a little bit more energy to heat up) and take 2-3 sips from it every 15-20 minutes while you're having a ride, it'll keep you both warm and hydrated. For longer and colder rides I'd recommend getting an additional mug/thermos with hot chicken soup. It also gives warmth, and also minerals and salts which you lose while sweating plus it has some glucosamine for your joints.
@RobertBeriault753Ай бұрын
Thank you for the good demonstration and the advice. Do you advise using Loctite on the bolts before putting them back in?
@kiernansmith472Ай бұрын
Yeah this shit don’t work lmao😂
@Zak_filmsАй бұрын
Hi where can i buy a new hub motor for my mac fox
@legendaryanimegeekАй бұрын
Is their a video of replacing the rear axel of an ebike
@ogtech55222 ай бұрын
Im thinking about going to buy some tools and take apart mine. it stoped working, and when i push the bike backwards, the weel gets stuck and don't go freely.
@geodez8626 күн бұрын
У меня набралось инструментов на покупку трёх велосипедов😂 Бро, сходи в мастерскую. Это дешевле.
@ogtech552226 күн бұрын
@@geodez86 I contacted workshop here in Netherlands. They said that they have 50eur/hr rates, so its cheaper to do it myself :D
@mrdshadow159812 күн бұрын
@@ogtech5522 Did you fix it? I have the same exact problem i am opening the bike now but a screw of the motor doesnt open. I have a ouxi in the netherlands as well Did you fix your problem en waren het dus de 3 wieltjes die kapot waren? Ik was mn woorden in het engels kwijt bedankt
@ogtech552211 күн бұрын
@mrdshadow1598 I was able to open it up, all my gears in the motor was broken off, and its looked like a mess. Also the cable was damaged. I just ordered new wheel with 500w motor from aliexpress, it should arrive soon.
@Kaetoh2 ай бұрын
My rize bie (regular rize model) has over 1k km’s and just randomly stopped working. Batteries seem to show up on lcd and lcd turns on, but no power/ability to move. As soon as I turn it on the headlight/tail light are automatically on, and it wont go above 1. On 1, the throttle does nothing. If i go down to 0, its stuck there. Wont go back to 1. There is a small crack on the bottom of my throttle but must have been from the one time i had a minor crash running into a curve. Telt like it was mostly the wheel that got sorta warped but still fine. Was a stupid mistake trying to take a phone call riding. Anyways, im rlly hoping its an electrical wiring issue thats simple to fix as i just missed my dr appt the other day assuming itd work as usual and being unable to figure it out. Gonna go re check the wires n shit now. Lil rust on the sprocket tho i gotta be better at cleaning at and get some proper grease/lube if wd40 is not good
@tofanalexander2 ай бұрын
Thanks, man. Was going crazy putting it back!
@mr.mcmich87232 ай бұрын
I have loud rattling/grinding noises coming from my motor hub,I have found any loose spokes so it has to be inside the motor hub,my question is how long can I get away with using my bike while in it’s condition and my guess is those teeth you mentioned that need to line up when snapping the motor hub back together could be damaged on mine and that’s where the loud noise is coming from,I have the discovery ebike and the motor looks the same as the one your demonstrating,maybe slightly bigger ,I don’t know how much a new motor would cost me or if that’s the cheapest route for me to go,unfortunately my bike is my transportation at the moment so I greatly appreciate it if you could get back to me with some suggestions when you have the time,thank you.
@oscarlinder862 ай бұрын
Where do I get a replacement pin? What is it called? Mine broke
@OzaruPrince2 ай бұрын
What size is the bolt ? I have a e bike and the adjuster just fell off today I only found the “ boot “ and the metal thing that goes on the inside not the bolt
@maxheadroom15062 ай бұрын
You forgot to put the square rounded pin in.
@PaulChapman1bz2 күн бұрын
And the planetary gears are still on the bench at the end of the video 😮
@kanogomez50632 ай бұрын
What about if the battery has issues..?? Cuz I changed the display,the controller,the motor I got a new throttle a new wire for the display the one going from the controller to the display and changed all the connectors and I still got 30h error on my screen ..😵💫😵💫I'm going crazy the rides but the speedometer ain't working she's stocked in high speed that's a good thing at list but every time I go fast the battery % goes down to 0% and come back to normal when I slow down....
@jimlahey88622 ай бұрын
Hello i have heybike race max im getting the e33 error code battery still works
@lxne65902 ай бұрын
What kind of grease do you put in there?
@BillBadMule1232 ай бұрын
White lithium grease
@lxne65902 ай бұрын
@@BillBadMule123 thanks
@sebumgold31082 ай бұрын
PY motors used phillips screws on hub motor! So i cant remove them without stripping them 😂
@lxne65902 ай бұрын
Same here 😂
@sebumgold31082 ай бұрын
@lxne6590 such a bad choice... Running out to harbor freight to get a cheap Impact Screwdriver and Bolt Extractor Kit today. Frustrating!
@lxne65902 ай бұрын
@ Ik it’s a big pain. I did the same thing make sure to predrill a deep hole before using the extractor
@sebumgold31082 ай бұрын
@@lxne6590 grabbing a cheap extractor set that comes with lefty drill bits. Plan on using impact driver on remaining screws as I stopped before ruining them all. Didn't touch the new motor, so only damaged the old defunct motor. Swapping cores.
@lxne65902 ай бұрын
@ gotcha good luck
@kanogomez50632 ай бұрын
I got that same problem...i bought a new display a new controller and now a just got a new hub motor and the problem still there....I'm going crazy the battery is charging fine so idk what it's...I checked all the wires too ...😵💫😵💫😡
@christopher-tg5zv2 ай бұрын
iv got the opposite problem my ebike wont turn off the display turns off but everything else still functions no error codes i think that the controller wont turn off but how to fix without buying a new one
@dennisd74512 ай бұрын
That pin in the old days was called a Woodruff key that holds the planetary gears to the axel and should be replaced.?😊
@krakerjak32 ай бұрын
It says to remove the bleed funnel once its emptied, but he removed it when it was still half full. Im confused
@mosama222 ай бұрын
Thank you so much for the beautiful video, but quick question please: Is this mean that we can upgrade our motor?! Thank you again 🙂
@benjoshd33862 ай бұрын
Can I use third party battery using the ebike secondary battery outlet