Awesome vid, glad I found it! Just picked up a 2000 model fully lifted on 35s, my father in law has this same rack, I think I may commandeer it and repurpose it just like this!!

Is there a way to get all the rest of the fluid out of the torque converter in the same fluid change?

An excellent instructional video.

Am in the process of changing the body mounts will try this first cz man mine still look good maybe a bit of cracking but not bad at all especially the ones in the back, you might save me a few bucks if that’s what it is

Hopefully you'll never have to do this Me: def going to have to do this😵‍💫

Nicee

Well I'm going to assume there is a problem here "Houston!". What good are these bump stops if they are 5 or more inches away from the axle. I checked with Timbren and SUMO and theirs are 1 to 1.5 inches away giving them a normal ride until loaded. Your product line must be mistaken. I would never use a bump stop to assist in a heavy load on the rear that required my truck to squat 5 to 6 inches before making contact. Give it a look see and try to find out why these are so 'not conforming to helping out in carrying a load'. Now it could be that you only got bump stops to replace factory ones that are also too short to help with any load and that may be the entire problem we as viewers are seeing.

We need the ball joint remover video. Thats the most important part!

Niceeee I'm gonna do control arms an these... good video man

I got one bolt that won't budge and I'm about to throw the whole truck away🤬 help

Can you change the sway bar links without having to jack or lift anything ? They go right back in no prob. ?

I was going to say, use both always: new gasket + gasket maker, and torque bolts correct !! No leaks =)

Love this cause my 85 is getting these and hopefully LED taillights also!crg ♥

Did you bleed it from the brake lines in the rear

Is it hardtochange valve covergasket?

We have an 01 Excursion V10. I'm pretty sure you should use 75w140

i can only find these control arms for s55. Is the control arm the same for the CL that you showed in the video? non of the control arms online say for cl55. they all say s55. just want to make sure its correct let me know thanks

The uhhh so uhh the uhhh brakes uhhhhhh are uhhhhhh leaking uhhhhhhhhh some uhhhhhhh fluid ummmmmmmmmmmmm maybe uhhhhhhhhh we should uhhhhhhhhhhhhh

Thank You for making this video. I am working on my 79 Pinto speedo cable / speedometer not working. This video helps me with testing things before I finalize install.

Black Jack car jack (trying out the cheap car jack from Walmart)

You might want to re-read your owners manual. Most Ford rear ends of that generation require 75w140 synthetic.

how much oil would you lose because of this

GREAT video, thank you VERY MUCH!

Just now installing my coilovers do you still suggest getting the sway bar and where should I buy it

Nice Video man.! I really appreciated it

Couldn't you just plug the ports on the tandem part of the pump? Also, it's 2024, how's the car doing?

Sorry - not helpful.

You should keep the nut on the end of the ball joint, loosen the nut til it’s about flush with the bottom of the ball joint bolt that way you got plenty of threads gripping it, now when you use the ball joint separator and once it finally breaks loose it doesn’t just go flying but still breaks loose, THEN you can take the nut all the way off and remove control arm

Smart to open drain first to slow dump. Mine was dark with metalic sparkles in catch pan. Grey. I flushed with 1/2qt fresh atf! Lots of mud. I changed front diff. Wow slips into 4x4 fast and smooth. Surprised it cured hard turn. Smooth and tight turning 4x4 low!

Awesome!! I'm in the process of doing this on an 87 elco and was struggling. This helps tremendously

The stock headlights suck so bad it's not even funny 😂

Man I was just gonna do a drain not removed the pan but now you got me thinking about the filter just floating around in there lol

You can adjust Deez😂

I have one that has the same color scheme

greetings, it doesn't work forward and back, I looked at the fuses, they are all ok, all the functions work on the seat, except forward and back, what could be wrong with you

You fast forward most of the whole video and didn't show the pain in ass shit that comes along with the in stall...

I have a 1986 dodge ram d150 and 3-4 screws from the transmission oil pan are shorter than the other ones i just wanted to know if that is the way they have to be. Thanks in advance

Did you replace the tandem pump? If so, with which power steering pump? If not... How does that work?

Thank you for the video just got my excursion

Whar about rear sway bar?

Very SOLID tutorial man! Thanks, its really helped. Im NOT a mechanical guy, but i also can't afford to take my 2001 Excursion Limited to the dealership or elswhere to pay to have it done. Thanks again👍👍👍

Hey! I have a problem with the brake cylinder and clip, when i installed the new one with a new ring, the whole cylinder is so loose. Its twisting and eventually pops off the brake band. Have you ever been in the same situation or have any tips for me to "tighten" the ring so it wont twist? Its not mounted firm.

EZ fix thanks mate

If you do the change to coil over do you have to change the power sterring pump thanks

What size pipe did you use?

This was too fast. Also, what “kit” is he referring to?

5:39 what good is the reflector if the bulb only shines down?

So there’s no actual gasket just rtv?

Where can I order for Chevrolet

What brand roof rack is that?