muchas gracias!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! de verdad, este video me ha ayudado muchisimo
@MrSuicidesilence916 күн бұрын
Thank you for your time to make this video. Have a healthy good time!
@RabbitConfirmedАй бұрын
What monitors are you using?
@RacingCockpitsАй бұрын
The monitors used in the video are Samsung G5, 32" with a 1000r curve.
@RabbitConfirmedАй бұрын
@@RacingCockpits Oh nice, can you recommend them or do you have other preferences?
@RacingCockpitsАй бұрын
@@RabbitConfirmed We actually still use them on our main setup in the office. They're a great deal if you don't want to spend the cash on the G9 series.
@RabbitConfirmedАй бұрын
@@RacingCockpits I actually own a G9 for my gaming setupd. Wouldn't you say a 32:9 is less good than triples? From what I've seen, triples are superior, but idk.. What do you think? Do you just use one 32:9 instead or?
@RacingCockpitsАй бұрын
@@RabbitConfirmed It really just comes down to personal preference and system performance. It's always easier on a PC to only use one monitor. A triple monitor setup will give you a much wider view, but also takes more to setup on top of the cost of three monitors.
@banjoqcАй бұрын
This guy is a legend!
@JohanDikkenberg2 ай бұрын
I use the Sim Labs Vario Vesa Adapter Kit it makes youre life with mounting youre monitors even more easier
@Bigheadedwon2 ай бұрын
This looks like the setup I want to build this summer. If you still have this could you measure the width? I’d want this cockpit with the same 32” G9s and don’t have a ton of space. So I’m wondering if it’ll fit.
@RacingCockpits2 ай бұрын
The width of the cockpit is approximately 55" using these G5 32" 1000R curved screens.
@IgorHolovka3 ай бұрын
thank you for the video, was so useful!
@rachedguerafi9383 ай бұрын
thanks alot for the guide, its the best one i could find on youtube. however, i have to ask why is your seat flexing alot while you are driving, is it not tightened enough ? what is the cause ?
@RacingCockpitsWarehouse3 ай бұрын
A keen observation! You can also see that the cockpit itself is moving as well. That's from the Sigma Integrale motion system on our demo setup.
@FoxRob934 ай бұрын
Just ordered one today.
@tdg9114 ай бұрын
Do you have a video on constructing the extruded aluminum monitor system?
@RacingCockpitsWarehouse4 ай бұрын
We don't have a video on building the stand, unfortunately. If you have purchased one, please reach out to our support and they can provide a .PDF manual.
@edreed55714 ай бұрын
U the real mvp, king
@xxmuffins352xx5 ай бұрын
Thanks for the video on this. It looks like the Simlab GT1 Evo instructions have you mount it all on the rig first and then install the seat. However, your approach seems to be a lot easier especially for a beginner doing this the first time. Looking forward to trying out this method once my seat and seat slider kit arrive!
@julianduggan31195 ай бұрын
😊😊
@RobRast5 ай бұрын
love it, answered all my questions - now I need to see you race
@bang75875 ай бұрын
Do you recommend getting the cockpit mounted monitor stand? Or freestanding? Torn between the two, don't want the monitors to be vibrating/moving while racing
@RacingCockpits5 ай бұрын
We haven't had any issues with our integrated mounts moving while racing. Freestanding mounts can give a little more adjustability as well as being able to hold larger monitors. For instance, if you have a Sport Series cockpit put need a Pro Series Freestanding Mount. We also recommend a freestanding mount if you're using a motion system as an integrated mount may damage the monitors. We have freestanding mounts available for both our Sport and Pro Series mounts in both single and triple configurations. They're not currently on the website, but if you send us a text, e-mail or message we can create the order for it!
@whyilovethemoon6 ай бұрын
Are these 32 or 27 G5s?
@RacingCockpits6 ай бұрын
All three are 32"
@zachowens14126 ай бұрын
I will def reference this once my pro gets here. My wheel is mounted in a TV tray now and it’s a bit unstable! I can’t wait to see how my triple 27” look on this.
@matthewwhite51586 ай бұрын
Torque specs: 1.5 ooga's
@deadmanwalking19306 ай бұрын
Why all these tutorials show side mount way, and not base mount. 😮 also you say push down with thumb to get them to slide, but I can't find any part that does this.
@RacingCockpits6 ай бұрын
The side mount option is popular because it allows for easy seat adjustment for height and angle. Nothing wrong with a bottom mount though! The part to push down on, as mentioned at 2:30, to get it to slide is the silver latch that the slider bar attached to later.
@deadmanwalking19306 ай бұрын
@RacingCockpits I will order side mount brackets and return the slider. I ill use in fixed position, its only me that uses the rig. I never want to see another seat slider in my life.
@jonneymendoza6 ай бұрын
Why?@@deadmanwalking1930
@matthewwhite51586 ай бұрын
FOV police approve
@Schwing277 ай бұрын
What monitors are you using?
@RacingCockpits7 ай бұрын
In this video we're using the Samsung 32" G5 1000R.
@victornin75057 ай бұрын
Great guid!!! Are you still running the g5? And would you recommend them.
@RacingCockpits6 ай бұрын
The G5 setup is still running strong! For the price they're a great monitor. For a little extra, the step up to a G7 is also a good option.
@exitspeed_7 ай бұрын
You rock! Thank you!
@junmingliu10217 ай бұрын
Hi, quick question, how close is your eyes to your monitor?
@RacingCockpits6 ай бұрын
The distance with this setup is about 27" - 35" depending on the seat. It could be a little closer, but we have to allow room for the motion system.
@jeremyfehlauer33957 ай бұрын
#1 thing to make sure before doing anything is make sure the brace that holds the monitors is level. If it isn’t the side monitors will have a huge gap at the top. Also use black electrical tape to pull them together perfectly and seal the seam so no light gets through. This will save you hours of frustration
@JustMamba7 ай бұрын
I second the tape suggestion. It took my "just alright" aligment to now perfect. I cant even tell whwre the two other screens begin when playing
@kevinhunter4528 ай бұрын
What monitors are they? How did you know what angle to set the side monitors
@RacingCockpits6 ай бұрын
The monitors in this video are the 32" G5 Odyssey 1000R Curved Screen. We've since swapped out the middle monitor for a 32" G5 flat screen. We find that it gives a more immersive feel over a curved center screen. The angle of the side monitors largely depends on personal preference for Field-of-View (FOV) settings.
@Simlife10124 күн бұрын
@@RacingCockpits No it isn’t personal preference you must use fov calculator that will tell you what angle to set the side screen too relative to your eye distance and screen sizes once you input that into the calculator not only does the FOV Calculator give you the FOV to set but also what angle to set the side screens
@the_normsk8 ай бұрын
I got to the seat install part of the instructions and I was like, I have no idea what I'm doing! then I found this video. This is invaluable Eric! thank you for this. You explained it really well, though of cause I installed the sliders already on the rig before I looked at the seat per the instructions. Still wasn''t too bad. Biggest issue? Dragging two beers before had made following the instructions harder! LOL.
@Titan1458 ай бұрын
You ever had an issue with the brackets on these prisma seats being misaligned? I got my slider on and it’s kinda bent more towards one side. The only thing that looks off to me is one of the brackets seems like maybe a half inch closer to the front of the seat
@RacingCockpits7 ай бұрын
Yes, this is a good thing to bring up. This is somewhat due to the nature of the NRG molded seats. We designed our seat rail extrusions to be fully adjustable and independent so you can still get everything straight even if the fronts or backs are closer or different side to side.
@mementomori49729 ай бұрын
Yea but wat if I don't have a five axes adjustment. Why can't you just put that in the title?
@bartoszszarko87859 ай бұрын
are these samsung g5 27 inch?
@RacingCockpits6 ай бұрын
These are the 32" G5 Odyssey 1000R Curved Screen
@offdapace26279 ай бұрын
How do you managed to get it so perfect without using the vario that everyone says it’s a MUST !!!
@Simlife10124 күн бұрын
@offdapace2627 it is needed once he starts to drive and the FFB causes the monitor to shake slightly they will come out of sync and need readjusting (I’ve been building sim rigs for 10 years plus) Also the vesa plates are not designed to be used to level the screen that’s just a hack and good idea but not by design. The vario adaptors will allow you to lock it into place so they never ever move again
@macho8303n1310 ай бұрын
Hey here from jed channel hopefully soon i will be looking into getting a setup
@andotski_10 ай бұрын
yeah i definitely have my sliders upside down 😂
@MADWOLF_GR10 ай бұрын
Hey really nice and helpful video... What is the best distance between our head and monitor...? I use 34 ultra wide monitor's..
@RacingCockpits6 ай бұрын
Generally it's best to have the center monitor as close as possible without interfering with your wheel. Our setup needs a little extra clearance due to the motion system, but is still about 27"- 35" from the center screen to our head position.
@MADWOLF_GR6 ай бұрын
@@RacingCockpits thanks mate..!!!
@ryleighjulina572410 ай бұрын
"Promosm" 😍
@DJHeroMasta11 ай бұрын
I hope the photo shoot went well!
11 ай бұрын
Very well explained. 👍
@RacingCockpits11 ай бұрын
Thanks!
@aldinturan327111 ай бұрын
Can you please post more videos? I’m definitely considering buying one!! Keep it up.
@nikexy3905 Жыл бұрын
Hi! how wide is the setup from monitor to monitor? I'm thinking about doing this, but have very limited space.
@awwk8452 Жыл бұрын
Hey I ordered mine today. I was wondering is it possible to mount a shifter and a handbrake together on the sport cockpit? I see this is possible to mount with a fanatic shifter but I was wondering if it was possible in any way with a Thrustmaster TH8A shifter
@RacingCockpits6 ай бұрын
Unfortunately, it looks like the best option for the Thrustmaster shifters and handbrakes is going with a third-party mounting plate. Definitely something we will look into more!
@Lurch-11 Жыл бұрын
Just finished setting mine up! Love it, just struggling with monitors. Have it adjusted as far as i can get it yet middle monitor is angled up slightly and also wont go back dar enough or low enough to get behind wheel. Im using 3 LG 32GP850-b's and a Fanatec DD Pro Premium bundle. Badass rig just hoping i can figure something out here lol
@RacingCockpits6 ай бұрын
Hey there! Sorry to just be getting back to you now. Our video on the triple mount his some tips to get the angles and bezels to match up perfectly!
@MasterCamus Жыл бұрын
Hey mate Is this a 800mm centre piece or 1200mm? And I imagine those monitors are 32”?
@erikgonzalez2486 Жыл бұрын
Great video what size and brand are your screens ?
@RacingCockpits11 ай бұрын
Thx! Samsung G5 32"
@WORLDGAMESETECNOLOGIA Жыл бұрын
And.. asus bezel kit for perfect view. 😎👊
@SMSmotorsports Жыл бұрын
is it possible to order upgrade parts from the pro such as the shifter arm for the people that bought the sport originally.
@RacingCockpits6 ай бұрын
If you're still looking to upgrade, feel free to send us an e-mail, text, or message through our website. We have extra stock of the extrusion we use for people who want to customize their rig to fit their style and gear!
@brandonchretien5995 Жыл бұрын
are these 1500R curved?
@jasonodson5670 Жыл бұрын
I have 32in curved monitors. What’s the ideal angle on the monitor arms?
@RacingCockpits Жыл бұрын
65 degrees is what we're using here for 1000R curved 32" but it depends are how curved your monitors are. For 1500R you'd do something like 55 degrees and for flat 45 degrees. Ultimately though, it's all about personal preference to get them how you like them.
@thomasb3668 Жыл бұрын
Nice Rig! What resolution are you running those 32 triples in?