Пікірлер
@__THE_SOMA__ Күн бұрын
☯️⏳🕉️ SHOW EXAMPLE PHOTOS/VIDEOS WHAT R U TALKING ABOUT
@__THE_SOMA__ Күн бұрын
☯️⏳🕉️ DM
@__THE_SOMA__ Күн бұрын
☯️⏳🕉️ DM
@__THE_SOMA__ Күн бұрын
☯️⏳🕉️
@rajathkunte7979 7 күн бұрын
I'm into fdm 3d printing, i can see huge potential in metal 3d printing
@Foundry_Podcast 7 күн бұрын
@@rajathkunte7979 Hi, Thanks for sharing, we’d love to know more, please write to us on [email protected]
@rajathkunte7979 7 күн бұрын
@Foundry_Podcast decently, love your work on industry oriented podcasts.
@Foundry_Podcast 7 күн бұрын
@@rajathkunte7979 Thank you 🙏🏼 Much appreciated!
@aayushkukreja8657 8 күн бұрын
He is looking at the camera more than towards the host.
@Foundry_Podcast 7 күн бұрын
@@aayushkukreja8657 Thanks for Watching ! Mr Shanavaz was focused on the audience and I think it’s come out very well! 🙂
@rdilipan 8 күн бұрын
Is there a large scale 3D printing solution provider in Bangalore / India?
@Foundry_Podcast 8 күн бұрын
@@rdilipan There are, but depends on what material is needed to be printed. PeeKay is mainly referring to Sand printing here in the video, the other printers have been printing polymers. What is the use case?
@rajathkunte7979 7 күн бұрын
Hi how large and material looking for
@ashishkumar-lb1ib 9 күн бұрын
Great thought process❤
@Foundry_Podcast 9 күн бұрын
@@ashishkumar-lb1ib Thanks for watching Ashish! 🙂
@rajivmaroo4569 9 күн бұрын
3D printing is the future
@Foundry_Podcast 9 күн бұрын
@@rajivmaroo4569 Thanks for watching Rajiv, hope you enjoyed the video too! 🙂
@Everyday-metallurgy 9 күн бұрын
Dear Ian. You really do A great job with the Podcast. On this episode about repairing I could recommend to look into two episodes I made on the podcast “Everyday Metallurgy” about welding of very large casted components without need of preheating. I have linked to the episodes below: Solving the Impossible Task - Welding of Cast Iron - Part 1 kzbin.info/www/bejne/n6audIOXl79qY7M The REAL Difference Between Success and Failure - Part2 kzbin.info/www/bejne/i4DMaJxti5WKgMU
@Foundry_Podcast 9 күн бұрын
Thanks Peter! Really informative! 😊
@chandrusoneji8108 12 күн бұрын
V informative! Good job Ian. 👏
@Foundry_Podcast 12 күн бұрын
@@chandrusoneji8108 Thank You Mr Soneji, Nice meeting you at Wescon! 🙂
@chandrusoneji8108 12 күн бұрын
V informative. Good Job Ian.
@Foundry_Podcast Күн бұрын
@@chandrusoneji8108 Thank you Mr Soneji! 🙂
@yashksingh262 20 күн бұрын
Great work Ian. I’m down with pneumonia, hope to see you soon brother Much love and respect ❤
@Foundry_Podcast 20 күн бұрын
Yash man, Thanks a ton! Better take care of that, sometimes could be critical, get well soon! 😮
@gauravbindal4168 24 күн бұрын
Best wishes for Vulcan India under the dynamic leadership of Mishra Sir👍
@Foundry_Podcast 24 күн бұрын
Thanks for Watching! 🙂
@RahulSharma-bv8pp 27 күн бұрын
Best foundry channel sir ❤
@Foundry_Podcast 27 күн бұрын
@@RahulSharma-bv8pp Thank You dearly Rahul, hope you enjoyed the video! We really appreciate each viewer and when we receive comments like this, it makes the work fruitful. Thank you again, - Ian
@knowledgefundamentalajayra8660 28 күн бұрын
आपका पॉडकास्ट बेकार है यदि हिंदी में बात नहीं करते हैं तो
@Foundry_Podcast 28 күн бұрын
@@knowledgefundamentalajayra8660 मुझे खेद है कि आप ऐसा महसूस कर रहे हैं, यह हमारे अतिथि के अनुरोध पर है क्योंकि वे मुख्य रूप से निर्यात करते हैं।
@Balajigopinath9197 Ай бұрын
Does it work in sand castings??
@Foundry_Podcast Ай бұрын
@@Balajigopinath9197 Yes! All these are sand casting references only ! Thanks for watching!
@aummetals 26 күн бұрын
Yes, it works in sand castings.
@ganeshkulkarni6984 Ай бұрын
In investment casting process, preformed cores are used. Are you in that field also?
@Foundry_Podcast Ай бұрын
@@ganeshkulkarni6984 Hi Ganesh, I have conveyed your message to AUM, they should reach out to you as well or please drop your email! Thanks a ton!
@prashanthb6521 Ай бұрын
Nice.
@Foundry_Podcast Ай бұрын
@@prashanthb6521 Thanks for watching, glad you liked it Prashant! 🙂
@aummetals 26 күн бұрын
Thank you. Connect with us to know more about the product!
@prashanthb6521 26 күн бұрын
@@Foundry_Podcast I was a foundry guy briefly before I left for software. I still like foundry.
@SureshPatil-fn1tb Ай бұрын
Very good initiative...keep it up
@Foundry_Podcast Ай бұрын
@@SureshPatil-fn1tb Thank you Mr Patil for taking the time out to watch the video, we really appreciate it. 🙂
@aummetals 26 күн бұрын
Thank you. Connect with us to know more about the product!
@Arpitkantia Ай бұрын
Hi Ian, great job at IFFE 2024. Appreciate your team's efforts to cover the entire event. Keep up 👏👏
@Foundry_Podcast Ай бұрын
@@Arpitkantia Thanks Arpit! Thanks to Techflow for contributing! 🙂
@VishalBhupathi-135 Ай бұрын
“Hi Nazareth, thank you so much for sharing this informative video! Unfortunately, I missed attending IFFE this time, but I truly appreciate getting a glimpse through your coverage. I’m eagerly looking forward to attending the Alucast Expo happening next month in Delhi. It’s such a great opportunity, and I’ll make sure not to miss it this time!”
@Foundry_Podcast Ай бұрын
@@VishalBhupathi-135 Hi Vishal, thank you you dearly for watching, appreciate the support! Exhibitions are truly like one big party for us and it’s the best time, (few of them are year) to connect with the Industry. Unfortunately we will not be attending ALUCAST this year as we’re working on another event with the IIF during December. Hope to see you soon! Do connect with us on our WhatsApp group! - Ian Nazareth
@vishalbk5967 Ай бұрын
@@Foundry_Podcastplease share me whatsapp link to join in
@Foundry_Podcast Ай бұрын
@ chat.whatsapp.com/Du4F7LMXvYbKVoKAQo1zbR Here
@BhartiBidkar-r5y Ай бұрын
Great sir 👏
@Foundry_Podcast Ай бұрын
@@BhartiBidkar-r5y Thanks for watching!
@Kishordesarda1 Ай бұрын
Background light is blinking too much. Too much distraction. Language can be Hindi , it will be more useful for wider audience.
@Foundry_Podcast Ай бұрын
@@Kishordesarda1 Thanks for suggestions and for watching ! 🙂
@snerlekar1 Ай бұрын
Great sir 👏
@Foundry_Podcast Ай бұрын
@@snerlekar1 Thanks for watching! Hope you enjoy our content! 🙂😊
@sai...2469 Ай бұрын
Very nice story sir.👏👏
@Foundry_Podcast Ай бұрын
@@sai...2469 Thanks for Watching! Hope you liked it.
@ganeshmathkar2985 Ай бұрын
Salute 🫡 to JD King 👑
@Foundry_Podcast Ай бұрын
@@ganeshmathkar2985 Thank you for watching ! 😊
@bhushantanavde8746 2 ай бұрын
Looking forward to meeting you at IFFE 24. ❤ Thank you for the video
@Foundry_Podcast 2 ай бұрын
@@bhushantanavde8746 will be great to finally meet you! 😊
@VikasHazrati 2 ай бұрын
Well said Balaji about Technology for Good, I am sure with this product the foundries would be much safer. I am sure your uncle would love this innovation
@balajidloganathan5245 2 ай бұрын
Thanks Vikas
@appasahebdeshpande8668 2 ай бұрын
Nice to see Sharad Dhumane sir.
@Foundry_Podcast Ай бұрын
He was a superstar on the Show ! Thanks for watching ! <3
@kussh100 2 ай бұрын
Nice to see this video on youtube. Hope indian foundry industry improves in quality, cost and competitiveness. The erp software will be good for automation of basic operations but if the technical design and quality control can also be automated, it would give more cost competitiveness to the industry
@Foundry_Podcast 2 ай бұрын
@@kussh100 Nice touch ! There are actually some very good ERPs in the industry, but majority of foundries struggle with the implementation. What is needed is a very low basic easy to adopt approach and scaling up from there, based on personal experience 🙂
@gopalkrishan1267 2 ай бұрын
It’s really amazing for foundries to change the behaviour of Indian Foundry work force to complete with International Standards by creating a safer workplace, improve efficiency of work force and generating a data for quality improvement. This is some of the things that I understand after watching the Foundry Podcast and come to know first time the power of AI. My special thanks to young engineers Mr. Balaji, Mr. Hari and Mr. Shriram. Foundry Podcast is doing a great job. Thanks..
@Foundry_Podcast 2 ай бұрын
@@gopalkrishan1267 Thank you GopalJi! Eye opener for us too! Please keep watching! 😊
@Everyday-metallurgy 2 ай бұрын
Do you have an episode on Electrical preheat of tundish and ladles? Could be interesting to learn if some already has implemented electrical preheating to reduce CO2 and make the working environment less humid due to the water produced in the gas burners.
@Foundry_Podcast 2 ай бұрын
@@Everyday-metallurgy Hello ! I think for technical topics and know how videos you should check out Dynamic foundry groups videos, they have a lot of tips and tricks for the foundry industry. We in turn focus more on the story and entertainment side of things with new technologies in mind 🙂 Hope this helps!
@snehakorangalekar1954 2 ай бұрын
Very interesting
@Foundry_Podcast 2 ай бұрын
@@snehakorangalekar1954 Thanks for watching @Sneha , hope you liked it! 🙂
@snehakorangalekar1954 2 ай бұрын
Wow nice sir & very inspiring journey
@Foundry_Podcast Ай бұрын
@@snehakorangalekar1954 thanks for watching! 🙂
@yadav-r 2 ай бұрын
Wow, there is a channel for Foundry tech in India, amazing. Insightful video. I wish to start my own foundry business, I have experience in Software development, currently working and learning CNC Machining and CAD design and I wish to do this, as I think there is relatively less competition, especially in India and I seriously belive if India wants to develop , Steel and Metal industries need to develop , USA was world power only because of their steel, China is leading because of Steel. I am your new subscriber, as a request, can you please do a podcast on how to start your own foundry, I am no hurry, currently building my software for cashflow. Thank you for sharing your knowledge.
@Foundry_Podcast 2 ай бұрын
@@yadav-r Yadav, Thank you for your appreciation and comment! We had started this 4 months ago with the intention of doing 52 videos until we decided whether it’s working or not, it has taken us only less than half that for us to be sure, thanks to people like yourself 🙂 This is an excellent suggestion, I am noting it down and we will find a guest on the show to cover this very topic, we have just the perfect person in mind too! Thanks for subscribing and keep watching! Also ping me on LinkedIn so I can add you to our WhatsApp group! Thanks a ton! - Ian
@anujjadaun6215 2 ай бұрын
Hindi main sarm aati hai
@anujjadaun6215 2 ай бұрын
Sale sab Paisa Ane ke bad English ho jate hain
@Foundry_Podcast 2 ай бұрын
@@anujjadaun6215 Hi Anujjadaun, It is not true. I have met some very very successful guests who speak Hindi, Marathi and Gujarati fluently, but would choose English as it could reach a global audience. Language should not stop you from making your money, it is only a mental barrier, soch badlo, and you can do it too🙂
@anujjadaun6215 2 ай бұрын
@@Foundry_Podcast sorry but thoda unko bhi samajh aaye jo English main kamjor hai sir
@Foundry_Podcast 2 ай бұрын
@@anujjadaun6215 Just for you, I will try to find a very successful foundry guest and interview them in Hindi, Promise 🙂
@adityajain9984 2 ай бұрын
Casting from sinto japan need buyers
@Foundry_Podcast 2 ай бұрын
@@adityajain9984 You mean you have a Sinto line installation?
@mallikarjunkundarnad9322 2 ай бұрын
This interview is done at your home. Wow! Great
@Foundry_Podcast 2 ай бұрын
@@mallikarjunkundarnad9322 He has a lovely home, best set for an interview 🙂
@mallikarjunkundarnad9322 2 ай бұрын
Very nice JD
@Meet1802 2 ай бұрын
How can we grow foundry business
@Meet1802 2 ай бұрын
I have a aluminium permanent mold die casting foundry
@Foundry_Podcast 2 ай бұрын
@@Meet1802 FOCUS on value addition. Preferably low batch qty margin work, I that’s what Mr Desai is advising 😊
@shyamalaroskar8025 2 ай бұрын
Very interesting and inspiring podcast!!
@Foundry_Podcast 2 ай бұрын
@@shyamalaroskar8025 Thank you 🙂, Mr Desai is one of our most fun to talk to guests, hence the long duration too!
@priyabratasinha3336 2 ай бұрын
I like his passion for Foundry and his inspiring journey too.
@Foundry_Podcast 2 ай бұрын
@@priyabratasinha3336 Yes, was an amazing time chatting with him ! Hope you enjoyed the video ! 🙂
@metalmasters9559 2 ай бұрын
What is the book name? Pls
@sharaddhumane1415 2 ай бұрын
There are many. For Defects, the huge "Atlas of Casting Defects" is very informative.
@metalmasters9559 2 ай бұрын
Thankyou sir... During the discussion you have mentioned an author name. Is it John Campbell or Jesse Campbell?
@Foundry_Podcast 2 ай бұрын
John*
@mdfaiyazalam6008 2 ай бұрын
Nice to see sharad dhumane sir..
@Foundry_Podcast 2 ай бұрын
@@mdfaiyazalam6008 Thanks Faiyaz, he’s done one of our most successful interviews till date.
@pankajjahujaJAL 3 ай бұрын
Hello ji , what are your views on micro / small casting units ? Govts aren’t of much help
@Foundry_Podcast 3 ай бұрын
@@pankajjahujaJAL Hi Mr Ahuja! Our NEXT Episode will answer this is Detail! 🙂 We have someone coming that is directly working with SME and MSME foundries to help them Grow. Thanks for being a loyal supporter of our content too, I really appreciate it. Please connect with me on LinkedIn too. Hope this helps! - Ian
@dutecfoundrycoatings 3 ай бұрын
Saras
@pramodgajare1184 3 ай бұрын
Many thanks for sharing the thoughts of a visionary Mr. R T Kulkarni through friendly discussions. His life is his message to the Industry!
@Foundry_Podcast 3 ай бұрын
@@pramodgajare1184 Thank you Mr Pramod for your comments! I genuinely had an amazing time talking to him, although we even had a script, we didn’t use most of it. Many thanks to him too for taking the time to do this! And Thanks again for watching! - Ian
@drdhv 3 ай бұрын
Good Podcast and happy to listen the experiences of Visionary person RT sir
@Foundry_Podcast 3 ай бұрын
@@drdhv Thank you Sir for watching! His zest for the industry and life at 79 is something that has also rubbed off on us. Not many people follow their passion so deeply. The day after the podcast, he was travelling to the US for 10 days, where does the energy come from I ask!? 😀 Glad you enjoyed it!
@drdhv 3 ай бұрын
Salute to his dedication... His thrust towards technology delvelopment and Adoption to grow Aluminum industry is remarkable and we can say it is driving him
@Foundry_Podcast 3 ай бұрын
@@drdhv Fully agree. 🙂