Trunk badge grommets don't fit front on an E85 Z4. I need front badge grommets.

I don’t know if you will see this message but my z3 have a problem when it gets to temperature it miss fires and loses power, I can put my feet all the way to the floor and it barely moves. I scanned the codes and it said my camshaft sensor was bad, I changed them but the problem was still there. I also got a code that said FUEL CONTROL (bank 2 sensor 1) is bad. Should that sensor be the problem

Thnx for the post. I used a heat gun, worked great. BTW- you got a really cool accent. You should be a Bond Villain

what size zippers are these ?

Doing this tomorrow. Thanks for the video, it’s straight forward and informative. Thank you

seeing some one do this makes me a lot more confident about sewing my windshield back in

NICELY DONE - thanks very much for this video ! I just bought an old 1998 z3 that NOONE wanted to buy because of this one single flaw - the rear window vinyl had literally cracked in 8 different lines across the entire window- just like you explained happens after 15+ years ! Now I'm looking forward to fixing this window even by this coming weekend - ALL THANKS TO YOU ! -Mark in North Aurora IL (USA)

my buddy accidentally put it in pin #17 and it sparked up at him, my Z3 won’t start now and I have an EML light :( my OBD scanner won’t connect to it anymore either… what are the chances I short-circuited my ECM?

Lmao nice. I was like damn how do I replace this!!! Thank you 🙏🏽

I admire the simplicity of this video. Thank u mate ❤

Genius. Never knew you could approach it from the underside of the hood. This worked great. Zero risk of scratching the hood. Thank you!

How often do you clean and reoil your K&N filters?

For all of the other rear lights, check here: kzbin.info/www/bejne/m6LZhH9tqLyaqtE

This is such a great video. Short, to the point, and no senseless jabber or useless information. Great editing and clear instructions. Thank you very much!!

hey alex, thanks for the video! replaced my taillight thanks to you

Life hack 101 BMW Z3 edition

Haha take that pump and use it for watercooling 👌🏽🤪

Love that engine bro bro ❤️

If you are looking on how to reset the service oil indicator, it's here: kzbin.info/www/bejne/f2mwZpiiopuVa6s

Tip: do this on a warm day or use a hairdryer to make the plastic more pliable...

Bro can you please name the glue you use? I need to repair my right side of the plastic window

It's a bastard of a job. Top Tip: earn the money and pay a trimmer to do it.

Same place on mine . Thank you

Great Job time to fix my 91 300SL

Thanks for the video. The item is no longer available through the link, anyone know where I can get a replacement for cheap?

Good work! Thank you! :)

Thank you

Thanks so much Alex great video!

Krakohzia

Nice !! Thanks very much for posting this !!! I actually imported a whole new soft top complete on rails with electrics and mechanics included - before learning that the back window was zippered in - as my Z3's back window got slashed a couple of years ago and then it became worn/trashed over time (I know MG's !...I collect them.... NOT BMW's.... but I'm now becoming a fan !! ), I always thought that they should just zip out...(like all the other soft tops I've ever owned - and Fark Me - spending 2 grand to get everything and then youtube ing how to do it - educated me ! - For gods sake, here in NZ nobody knows,, even the BMW dealers (read sales support) - go.... "UMMMM we can do it but that'll cost 1000 euros, let me convert that into NZ $'s for you" .... ). I realized (after a bit of unpicking), that some previous owner of my Z3 had gone the extra mile and sewed the cloth hem down over the zip in the Interior as well. Absolute legend ! His mother must have been a leader in the boy scouts (or Hitler Jugend - that's a joke by the way) SO I shall do the same !

😂😂😂😂💪

I changed my crankshaft pulley last week the I got this problem , really I was lost I did not figure it out ,but now it’s clear, Thanks so much 👍🏼😊

Shouldve used black thread to sew it back together?

Lol I've been dailying my 2.8 roadster in the winter the past few years. It's pretty fun with snow tires. Makes the drifting predictable instead of a surprise.

Check this out my frend 👍👍👍

Salut ami can you tell how to change the zipper or whear did you bye your window from Thank you

Thank you...I'm having the same problem when the engine gets hot. I ordered the crank sensor, and I'm sure it will correct the problem.

is this the same sensor as in a m52b20?

I have this problem with the M54, If you guys have this problem on the m54b30 the camshaft sensor is in the front of the engine, symptoms are hesitation to start when warm. Hope that helps.

The link for the window on eBay no longer exists

It’s so difficult to stitch!!

Do you know how to replace the fog light bulb?

Why didn't you upgrade to LED's?

I have the exact same problem on my Z3 1.9 thanks for pointing me in that direction.

Great video! I used the same kit. It is a huge help having someone hold the window. Take your time with the glue and it’s not bad.

hi .thank you for your video, i need to change the rear window on my z3 1.8: I can no longer insert the fabric in a lower corner of the gasket (original rear window) so I am interested in the model you proposed in the video. I think that with the double fabric covering the zipper it protects from the infiltration of rain. write me the exact name and brand of your rear window. how do you feel with it? thank you Giorgio

Very nice job! I appreciate you taking time to make this video & show the step by step process. It was really helpful. These type of repairs require skills & take lots of time. Good to know how to keep your car looking nice without spending lots of money. I give you two thumbs up! Cute kitty too. Thank you for sharing. Wishing you abundant Blessings!

Crank position sensor, yesterday we solved same problem on a 328i.

Thanks

My window is actually coming away from the stitching so this is a great help