Where did you bought stronger spokes, dimensions please ? :)
@VasCH4n10 күн бұрын
@@krunoslavbenko690 that's just a cover on the spokes, from Amazon a.co/d/a2NnWCP
@ellieparker528317 күн бұрын
What vault?
@ScoobyDo0.23 күн бұрын
I was thinking about getting this but for only about $500 more you could buy the rawer mantis x which is 72 volts instead of 60
@emikearizona24 күн бұрын
You'll get your bike back in shape, your bike is super cool looking. I'm hoping to get mine soon. Love your videos. (To line up the rotor and the caliper, have the caliper bolts loose, spin the wheel hold the brake and then tighten the caliper bolts. It forces them to line up together.
@VasCH4n24 күн бұрын
@@emikearizona Thanks for the support to my channel, still not in shape since the last accident but this week I will work on it
@ballsyasf28 күн бұрын
DO NOT put wd40 on your bike like he did
@JoshuaOsten-u3kАй бұрын
Hey bro you shouldn’t be touching your rotors like that, the oil from your hands is going to be toxic for that metal and could cause rust and erosion. Just a heads up
@E_bikeDadАй бұрын
can you link the spokes you bought?
@VasCH4nАй бұрын
@@E_bikeDad The measurement of these is 130mm specifically for this model, it can be 13/ 14/ or 17 grams, you will only have to make the pots large if they are not 13 G. I bought mine on AliExpress. a.aliexpress.com/_mNctpxm
@brentcollins9727Ай бұрын
You ran that stop sign and crossed the double line to pass that car. You should try to relax and chill on your rides more. We all should. There’s no rush.
@VasCH4nАй бұрын
No friend, I didn't ran the stop sign, the video was recorded in TimeLapse so the exact time cannot be seen. and I passed the double yellow lines because I deduced that the blue SUV was looking for a park due to the slow speed it was traveling.
@blagh52Ай бұрын
What psi do you run at?
@bringOUTyaDEADАй бұрын
Spoke sizes are 128 and 130 mm 12G
@krzysztofczapiewski1147Ай бұрын
żałosne XDRIVE i drift ? darujcie sobie bo szkoda rozdzielacza
@blagh52Ай бұрын
Did you get the extra battery to work?
@VasCH4nАй бұрын
@@blagh52 The extra batteries work super well, they have a autonomy of approximately 3 hours without having to pedal. I will post some videos that I will record this week.
@blagh52Ай бұрын
@@VasCH4n a video would be very helpful! I’m looking to do the same thing to my bike to get more range
@VasCH4nАй бұрын
@@blagh52 This happened to me while I was recording the video. kzbin.info/www/bejne/iJnGdaafhtN4apYsi=b2whXn7X_tDUgrYl
@blagh5225 күн бұрын
@ hope you are alright brotha that’s gnarly
@Maverick098-m5bАй бұрын
Can you link those pegs as a reply here.. i just need to make sure i get the right size pegs so fits on bike like you got it, basically what im after.
@VasCH4nАй бұрын
@@Maverick098-m5b a.co/d/8sM5l3p They just fit a little tight. Because the threads are a little different, make sure it fits straight and don't worry, the pegs are aluminum, they will adopt the threads of the Freego x2 Make sure you subscribe and like, that will help me a lot, thank you🫶
@geraldf9651Ай бұрын
Where did you get the tube from?
@VasCH4nАй бұрын
@@geraldf9651 I ordered from Amazon.
@geraldf9651Ай бұрын
@@VasCH4n thanks for the fast reply.
@MarvstubeSoontvАй бұрын
What would you say the range is going a minimum of 35 mph ?
@VasCH4nАй бұрын
@@MarvstubeSoontv I would say that it is not ok, the truth is my speculations are that we can go up to 80 mph, it would be a social and community challenge without forgetting the laws. At some point I will have to drive 10 mph, there is no minimum in that regulation.
@E_bikeDadАй бұрын
Did you see the X2 Pro video that is on KZbin? I wonder if its the company or a modification company that changed things
@matthaines53552 ай бұрын
Is that flashing led running of the bike or its own battery?
@ronbrown45512 ай бұрын
I had that problem when I started out the bike when I got it. I felt the tires thought they had enough air in them but apparently they didn't. So after that first ride it twisted the valve a little bit and I had to deflate it and straighten the stem up a little bit. And I checked the air pressure and it was too low. So since I put it up to 33 lb it seems to be doing okay. I saw another guy on KZbin that has the same bike and he just bought new tubes and they had the nuts on them.
@Ronnie-mp8ze2 ай бұрын
What size of tire lock are you using please
@VasCH4n2 ай бұрын
@@Ronnie-mp8ze it’s is 1.6 inches AliExpress. Tyre Rim Lock safe bolt 1.6" a.aliexpress.com/_mLOGb5w
@clubber.lang.762 ай бұрын
😊is this a defect with this bike or tire or something common? never seen these wheel locks. thanks for video I’m thinking about getting this bike!
@VasCH4n2 ай бұрын
@@clubber.lang.76 I am a person of approximately 215 pounds and I don't know exactly why the head of the air valve broke, that happened to me 4 times until I decided to put the rim lock to avoid unwanted movement on tire with the rim, you know, as a motocross. so far everything works perfect. This week I will upload a video explaining what was happening to me in this, regard the rim wheel lock , and showing damage from a second fall that I had 2 weeks ago.🫶
@cirwo852 ай бұрын
You ever get hard time from cops ?
@isaiahlea8562 ай бұрын
thx for the tutorial, just curious, where did u buy those cool red spoke covers, i want to get some for my own freego x2.
@VasCH4n2 ай бұрын
@@isaiahlea856 I bought mine on AliExpress Just found this amazing item on AliExpress. Check it out! $3.10 | New Motorcycle 72Pcs Wheel Rim Spoke Wrap Kit Skin Cover For Motocross Dirt Pit Bike Enduro a.aliexpress.com/_m04MQKs
@venlu3822 ай бұрын
Hey man can this thing take an extra battery? Thanks!
@VasCH4n2 ай бұрын
@@venlu382 I think so, in fact I have 2 extra battery for when I go long distances, it lasts approximately 3 hours without having to pedal. But the engine gets very hot, you have to be careful
@JohnathonJones-v1m2 ай бұрын
are there any street tires that work with the bike?
@VasCH4n2 ай бұрын
@@JohnathonJones-v1m Definitely yes, they are just a little expensive, but you can get them online, I recommend the original ones because they are very strong. In case you run out of air or your tube is damaged, you can still continue running with the original one. I bought these:a.co/d/bq71CJa
@FreegoBikesOfficial2 ай бұрын
Nice video and good job on modifications. Freego CEO is happy to say you are helping people learn more about Freego X2.
@VasCH4n2 ай бұрын
@@FreegoBikesOfficial Thanks, I was proud to hear that from you as a company, that is what I am in this life for, to enjoy great adventures on this great electric bicycle and share my experiences & knowledge.🔥🔥🇩🇴
@FreegoBikesOfficial2 ай бұрын
You guys love red spoke?
@VasCH4n2 ай бұрын
@@FreegoBikesOfficial Yes, It looks unique and can be seen everywhere. Also the bicycle in general is a dream come true
@justinhaynes49302 ай бұрын
Is the rear brake lever on left side or on the right side?
@VasCH4n2 ай бұрын
@@justinhaynes4930 Left side for the rear. On the right side is the throttle and the front brake.
@justinhaynes49302 ай бұрын
That’s wassup can u wheelie it
@VasCH4n2 ай бұрын
@@justinhaynes4930 I can't very well, because I don't know. but of course someone with experience could easily
@justinhaynes49302 ай бұрын
Ok kool are you gonna upload more videos
@VasCH4n2 ай бұрын
@@justinhaynes4930 Yes. I hope so, if you have some ideas that can help me I would appreciate it. Last Saturday I had an accident, I fell and some things on my bike broke and I hit myself badly, I still have pain when breathing.
@TheyLuvMikey3172 ай бұрын
Also did you have to drill the rim or make any modifications in order to install it?
@VasCH4n2 ай бұрын
@@TheyLuvMikey317 If you have one of these, you will notice some problems with the tube, it will be necessary to make some modifications and take responsibility for your actions. yes, I made an extra hole.
@TheyLuvMikey3172 ай бұрын
@@VasCH4n ok well i just received mine and it seems on my tires the valve has a rim lock built in because theres a threaded nut around it but ill see how it holds up during flat ground riding Edit: I see your tire has the same nut so ill def install the extra rim lock to prevent flats
@johnmacdonald81422 ай бұрын
@@TheyLuvMikey317can you explain what the rim lock exactly does and if you think it’s necessary?
@TheyLuvMikey3172 ай бұрын
@@johnmacdonald8142 basically what they do is prevent your inner tube from shifting when lots of torque is applied to a wheel running a low pressure (this bike runs at 33 psi) what will happen is that over time the valve stem wont be able to handle that rapid acceleration and exertion onto the valve stem and it will tear causing the tube to leak so a rim lock holds everything in place and prevents that shifting however it does make installing a new tube or tire MUCH more time consuming Side note: if you really want to extend the tubes life without having to install one id recommend riding flat ground and not too fast also after every ride check the tires psi but if you want peace of mind that your tube wont flat just install the rim lock
@geraldf9651Ай бұрын
@@TheyLuvMikey317 that’s exactly what happened to my bike. I need a tube now my bike is outta commotion
@TheyLuvMikey3172 ай бұрын
where did you buy the rim lock from?
@VasCH4n2 ай бұрын
@@TheyLuvMikey317 AliExpress,I bought it online the measurement is 1.60
@justinhaynes49302 ай бұрын
🔥helmet where’d you get it from?
@sophisticatedignorance75412 ай бұрын
Is that a 2000w?? What is the specs on that bike what’s the fastest you got it to? Asking because I’m thinking of buying one.
@matthewstultz7361Ай бұрын
It’s 3000w 6000w peak goes about 60mph I got mine to 54 so not super accurate but more then enough and it has a battery of 60v/30ah
@justinhaynes49302 ай бұрын
Where’d u get the seat pad from
@VasCH4n2 ай бұрын
@@justinhaynes4930 from AliExpress $12.99
@metaltoph3 ай бұрын
Hey man just wanna know how easy it is to remove the rear wheel for a tire swap. I see the motor is attached to the rear wheel
@VasCH4n2 ай бұрын
@@metaltoph It is super easy to remove the rear tire, it only requires two nuts and the complete tire comes out, but without disconnecting the cables, I will soon upload a video showing how I install a tire with the wheel rim lock
@joshfosho3 ай бұрын
had me worried when you started off the video saying you having problems with the bike but its all just issues you made lol, especially dumping the bike trying to wheelie. good to know it can at least wheelie though. for your front tire try letting the air out to reseat the tire on the rim then pump it back up slowly to keep it lined up. you can also get a spoke tool relatively cheap to tighten them up. bike seems kickass for the money though and i cant wait till i get mine
@VasCH4n3 ай бұрын
@@joshfosho You will fall in love with the result of the bike and for the price you paid, nothing compares to that vs(5k).🔥
@wilbertbaez24403 ай бұрын
🔥🔥😎
@wilbertbaez24403 ай бұрын
🔥🔥
@kevinmyles41373 ай бұрын
That helmet is savage bro
@SethChristensen-f8j3 ай бұрын
I need to replace the brake fluid because the brake is super spongy. What do I do for that? (Regular bleed with dot 4 fluid? and what rotor did you get for this bike? Where did you get it? I can’t find these brakes anywhere online.
@VasCH4n3 ай бұрын
@@SethChristensen-f8j I haven't changed the brake fluid yet. but there is a kit to do it, my recommendation is to loosen the caliper screw so that all the liquid comes out and then, note: Add new fluid until it starts to pull from the caliper , then tighten the screw and once it lets bubbles at the top, that's when you will realize that it is free of air then tighten the screw. for better performance. My I get it from Amazon.
@Renegadewalderfan3 ай бұрын
Dot 3 would work fine
@bhoff73653 ай бұрын
I love my X2. The bolts loosened on the kickstand so I ended up using loctite red to keep them for getting loose. So far so good.
@VasCH4n3 ай бұрын
@@bhoff7365 Excellent, I put the blue color on all the screws. Another problem that I have had is that the rear tube breaks, it is necessary to put a wheel rim lock 1.60 on it to prevent the tire move from the rim and prevent the valve moving from the ring.🪢
@bhoff73652 ай бұрын
@@VasCH4n Where did you get the rear foot pegs. Great addition!
@VasCH4n2 ай бұрын
@@bhoff7365 I ordered it on Amazon, the measurement is 14mm, but when you put it on it fits forcedly, you have to be careful with the threads.
@johnmacdonald81423 ай бұрын
This bike is an absolute beast. I’ve had it for about 2 1/2 months now I can tell you when you first get it you’re gonna be excited and want to put it together put the handlebars on and get riding I can’t stress enough take the Allen wrench and screwdriver set and tighten down every single bolt on the bike. Even the ones that come pre screwed in. Be patient and take your time and dial in the front and back brakes. I’m telling you the bike will not squeak or make any noise. It’ll sound like an electric car. People on bike pad will not hear you coming and I’m telling you right now that it is the most fun machine that you will have. It jumps and wheelies just fine. It’s got an insane amount of torque. It’s faster than the talaria. Battery last longer than the Surron. My only complaint is the suspension. I wish it was a little bit bit better but if you’re a smaller lighter guy, this bike is going to be so much fun for you. Trust me when I say Freego was insanely pleasant to work with I had some trouble with my charger and they sent me a new one. I can’t say enough good things about this thing. Whether it be a daily commuter and adventure bike or even just a toy for around the ranch. This bike is perfect and everything that you could want.
@siicklyy3 ай бұрын
mine comes in tmrw and i got this video on my page 😂, besides everything you said you have any other tips n tricks for the bike ?
@johnmacdonald81423 ай бұрын
@@siicklyy HAVE FUN! Charge the battery up completely and be careful when using the charger and charge in a cool environment with lots of ventilation. I can’t stress enough how much you need to pay attention to the brake caliper. I found that pushing it all the way over to the right if you have the bike upside down eliminates, all squeaking and scraping of the brake pad against the rotor. I recommend taking a few rides with the battery in it to be able to dial in the suspension completely to your weight with the battery in. The bike itself weighs around 160 pounds with the battery installed so you want to make sure you dial in the front and back forks. You’re not gonna be able to take this bike to just a normal mountain bike shop to have it looked at you’re gonna have to take it to a motorcycle shop for all suspension work. I recommend ordering an aftermarket rear spring suspension. That’s a little bit heavier duty. Also, make sure the tires are not blown out on any of the seams they’re not the best but if you don’t abuse, them too bad and you dial in the air pressure you’ll be fine. This is my first bike and especially my first bike extent so I’m learning to, but I’m telling you this thing is a nerfed dirtbike it allows you to do everything a dirtbike does just not to the full extent. You might be able to jump 20 feet instead of 60 feet like you would on a two stroke dirtbike. Make sure you take your time with wiring the headlight and where you place the wires. I took the mount that the headlight was originally mounted to off, and I used the metal one they supplied in the packaging, and I kind of tucked all of the wiring back behind that. Just make sure none of the wires are tangled when you turn the handlebars either way and you have enough clearance on the tire so in case you hit something with that front fork, the tire doesn’t tear up those wires. Once you get the bike, can you start setting it up? You’ll know more what I’m talking about and if you have any questions just feel free to comment back on this video while setting it up and I’ll try my best to walk you through it. If you need any help as well, I’m more than happy to give you my social media. That way we can help each other out and if you have any questions, and I have any questions later on, we can bounce stuff off each other. This bike is brand new, so I’m learning along with you guys, but I’m telling you this thing is a blast
@siicklyy3 ай бұрын
@@johnmacdonald8142 All that sounds great man thank you bro! If i have any questions tomorrow i’ll definitely hit you up no doubt! Again thanks for that bro!
@siicklyy3 ай бұрын
@@johnmacdonald8142 yo bro i’m installing it right now and im trying to install the front break but its hard to get the caliper unscrewed it’s too tight did you have thst problem?
@johnmacdonald81423 ай бұрын
@@siicklyyI had no issues unscrewing but make sure you’re not unscrewing something you don’t need to
@ckrafty61183 ай бұрын
Have you tried to wheelie it. Wondering if it has the torque to do so.
@johnmacdonald81423 ай бұрын
@@ckrafty6118 yessir all day erryday
@HannibalSahura3 ай бұрын
Brooooooo 😂😂😂 u messing up the bike bro but hold up did u see the new freego Natkie N1 yet???? It looks just like a surron
@bigballa82203 ай бұрын
Yooooo I didn’t know about the N1, gotta keep my eye out on this one! 💪
@KevinFinnegan3 ай бұрын
Glad I got the Motor Goat😊
@halinahernandez3 ай бұрын
❤❤❤❤❤❤ love you tio ❤
@halinahernandez3 ай бұрын
❤❤❤❤❤❤ love you tio ❤
@Finite86143 ай бұрын
🎯 Key points for quick navigation: 00:00 *🚴♂️ Review of eBike Issues After 3 Months* - Overview of various issues encountered with the Freego X2 eBike. - The kickstand was lost and replaced with a block. - Gearbox and screen display were damaged from trying to perform tricks. - Front headlight functionality remains unaffected after an online purchase. 02:00 *⚙️ Brake and Tire Issues* - Discussion of brake system performance and tire conditions after 3 months of use. - The front brake caliper issues, resolved temporarily with lock-tight. - Noted looseness of spokes and improper tire seating leading to a rough ride. - Adjustments made to calipers for better braking efficiency. 04:00 *🛠️ Modifications and Riding Experience* - Highlights modifications made for enhanced comfort and ride experience. - Added pegs for jumping and riding with friends on streets. - Expressed enjoyment in riding despite various technical issues. - Open invitation for questions and sharing of experiences with viewers. Made with HARPA AI
@VasCH4n3 ай бұрын
@@Finite8614 I don't understand your fucking point of view! But what I do know is that this toy is something huge and for those who do not have experience this can be something devastating, economically and physically.
@VasCH4n3 ай бұрын
but I love the development of this bicycle!❤️
@calijewelzz3 ай бұрын
Harpa is scary 😳 yet fascinating 🤓
@JerseyStyle73 ай бұрын
👍🏽⚡️ very cool bike even though I just ordered a P51 I still want to get this one, there’s a group ride tomorrow in Highlands New Jersey. You should come.
@VasCH4n3 ай бұрын
@@JerseyStyle7 I’m located at 619
@JerseyStyle73 ай бұрын
@@VasCH4n I should’ve paid attention. I was too busy looking at your bike. I didn’t realize you were in California. I’m gonna be out there for a month end of August.👍🏽
@salvationbmx15563 ай бұрын
Hey bro is Freego a trusted site to order the x2
@salvationbmx15563 ай бұрын
Yo is Freego a trustworthy site to order I’m wanting the x2 aswell