Freego x2 after 3 months old review

Peg : it’s 14mm, I get it on Amazon
a.co/d/ekkPxtx

[@johnmacdonald8142]

This bike is an absolute beast. I’ve had it for about 2 1/2 months now I can tell you when you first get it you’re gonna be excited and want to put it together put the handlebars on and get riding I can’t stress enough take the Allen wrench and screwdriver set and tighten down every single bolt on the bike. Even the ones that come pre screwed in. Be patient and take your time and dial in the front and back brakes. I’m telling you the bike will not squeak or make any noise. It’ll sound like an electric car. People on bike pad will not hear you coming and I’m telling you right now that it is the most fun machine that you will have. It jumps and wheelies just fine. It’s got an insane amount of torque. It’s faster than the talaria. Battery last longer than the Surron. My only complaint is the suspension. I wish it was a little bit bit better but if you’re a smaller lighter guy, this bike is going to be so much fun for you. Trust me when I say Freego was insanely pleasant to work with I had some trouble with my charger and they sent me a new one. I can’t say enough good things about this thing. Whether it be a daily commuter and adventure bike or even just a toy for around the ranch. This bike is perfect and everything that you could want.

[@siicklyy]

mine comes in tmrw and i got this video on my page 😂, besides everything you said you have any other tips n tricks for the bike ?

[@johnmacdonald8142]

@@siicklyy HAVE FUN! Charge the battery up completely and be careful when using the charger and charge in a cool environment with lots of ventilation. I can’t stress enough how much you need to pay attention to the brake caliper. I found that pushing it all the way over to the right if you have the bike upside down eliminates, all squeaking and scraping of the brake pad against the rotor. I recommend taking a few rides with the battery in it to be able to dial in the suspension completely to your weight with the battery in. The bike itself weighs around 160 pounds with the battery installed so you want to make sure you dial in the front and back forks. You’re not gonna be able to take this bike to just a normal mountain bike shop to have it looked at you’re gonna have to take it to a motorcycle shop for all suspension work. I recommend ordering an aftermarket rear spring suspension. That’s a little bit heavier duty. Also, make sure the tires are not blown out on any of the seams they’re not the best but if you don’t abuse, them too bad and you dial in the air pressure you’ll be fine. This is my first bike and especially my first bike extent so I’m learning to, but I’m telling you this thing is a nerfed dirtbike it allows you to do everything a dirtbike does just not to the full extent. You might be able to jump 20 feet instead of 60 feet like you would on a two stroke dirtbike. Make sure you take your time with wiring the headlight and where you place the wires. I took the mount that the headlight was originally mounted to off, and I used the metal one they supplied in the packaging, and I kind of tucked all of the wiring back behind that. Just make sure none of the wires are tangled when you turn the handlebars either way and you have enough clearance on the tire so in case you hit something with that front fork, the tire doesn’t tear up those wires. Once you get the bike, can you start setting it up? You’ll know more what I’m talking about and if you have any questions just feel free to comment back on this video while setting it up and I’ll try my best to walk you through it. If you need any help as well, I’m more than happy to give you my social media. That way we can help each other out and if you have any questions, and I have any questions later on, we can bounce stuff off each other. This bike is brand new, so I’m learning along with you guys, but I’m telling you this thing is a blast

[@siicklyy]

@@johnmacdonald8142 All that sounds great man thank you bro! If i have any questions tomorrow i’ll definitely hit you up no doubt! Again thanks for that bro!

[@siicklyy]

@@johnmacdonald8142 yo bro i’m installing it right now and im trying to install the front break but its hard to get the caliper unscrewed it’s too tight did you have thst problem?

[@johnmacdonald8142]

@@siicklyyI had no issues unscrewing but make sure you’re not unscrewing something you don’t need to

[@bhoff7365]

I love my X2. The bolts loosened on the kickstand so I ended up using loctite red to keep them for getting loose. So far so good.

[@VasCH4n]

@@bhoff7365 Excellent, I put the blue color on all the screws. Another problem that I have had is that the rear tube breaks, it is necessary to put a wheel rim lock 1.60 on it to prevent the tire move from the rim and prevent the valve moving from the ring.🪢

[@bhoff7365]

@@VasCH4n Where did you get the rear foot pegs. Great addition!

[@VasCH4n]

@@bhoff7365 I ordered it on Amazon, the measurement is 14mm, but when you put it on it fits forcedly, you have to be careful with the threads.

[@joshfosho]

had me worried when you started off the video saying you having problems with the bike but its all just issues you made lol, especially dumping the bike trying to wheelie. good to know it can at least wheelie though. for your front tire try letting the air out to reseat the tire on the rim then pump it back up slowly to keep it lined up. you can also get a spoke tool relatively cheap to tighten them up. bike seems kickass for the money though and i cant wait till i get mine

[@VasCH4n]

@@joshfosho You will fall in love with the result of the bike and for the price you paid, nothing compares to that vs(5k).🔥

[@Finite8614]

🎯 Key points for quick navigation: 00:00 *🚴‍♂️ Review of eBike Issues After 3 Months* - Overview of various issues encountered with the Freego X2 eBike. - The kickstand was lost and replaced with a block. - Gearbox and screen display were damaged from trying to perform tricks. - Front headlight functionality remains unaffected after an online purchase. 02:00 *⚙️ Brake and Tire Issues* - Discussion of brake system performance and tire conditions after 3 months of use. - The front brake caliper issues, resolved temporarily with lock-tight. - Noted looseness of spokes and improper tire seating leading to a rough ride. - Adjustments made to calipers for better braking efficiency. 04:00 *🛠️ Modifications and Riding Experience* - Highlights modifications made for enhanced comfort and ride experience. - Added pegs for jumping and riding with friends on streets. - Expressed enjoyment in riding despite various technical issues. - Open invitation for questions and sharing of experiences with viewers. Made with HARPA AI

[@VasCH4n]

@@Finite8614 I don't understand your fucking point of view! But what I do know is that this toy is something huge and for those who do not have experience this can be something devastating, economically and physically.

[@VasCH4n]

but I love the development of this bicycle!❤️

[@calijewelzz]

Harpa is scary 😳 yet fascinating 🤓

[@wilbertbaez2440]

🔥🔥😎

[@JerseyStyle7]

👍🏽⚡️ very cool bike even though I just ordered a P51 I still want to get this one, there’s a group ride tomorrow in Highlands New Jersey. You should come.

[@VasCH4n]

@@JerseyStyle7 I’m located at 619

[@JerseyStyle7]

@@VasCH4n I should’ve paid attention. I was too busy looking at your bike. I didn’t realize you were in California. I’m gonna be out there for a month end of August.👍🏽

[@salvationbmx1556]

Hey bro is Freego a trusted site to order the x2

[@salvationbmx1556]

Yo is Freego a trustworthy site to order I’m wanting the x2 aswell

[@VasCH4n]

@@salvationbmx1556 yes!100%

[@ckrafty6118]

Have you tried to wheelie it. Wondering if it has the torque to do so.

[@johnmacdonald8142]

@@ckrafty6118 yessir all day erryday

[@justinhaynes4930]

Where’d u get the seat pad from

[@VasCH4n]

@@justinhaynes4930 from AliExpress $12.99

[@Zigzig7777]

Yoo, how did you get pegs on the back tire bro

[@VasCH4n]

@@Zigzig7777 Amazon, it’s 14mm Only the threads may be different so you have to force it a little and put thread locker on it. a.co/d/ekkPxtx

[@Zigzig7777]

@@VasCH4n sweet thank you!

[@HannibalSahura]

Brooooooo 😂😂😂 u messing up the bike bro but hold up did u see the new freego Natkie N1 yet???? It looks just like a surron

[@bigballa8220]

Yooooo I didn’t know about the N1, gotta keep my eye out on this one! 💪

[@KevinFinnegan]

Glad I got the Motor Goat😊