The DadBod Workshop

Пікірлер

@EarthtonesCymbals 7 күн бұрын

Well done. Best wishes to you. I am replacing a flange gasket on a Nissan. It has the spring bolts.

@RobertSternberger-j4s 19 күн бұрын

Thanks for the video. When I try to detach the top unit after removing the 3 screws, 4 plastic plugs and 4 screws, it does not just pop off. Any thoughts?

@RobertSternberger-j4s 19 күн бұрын

Never mind. I needed to pop it off with a tad bit more effort. Thanks for the video.

@Factory928AC Ай бұрын

Just wondering what you used to hold your recording device??? It’s a nice POV

@Jasun78 2 ай бұрын

Nice bro😊

@Gunny426HemiPlymouth 2 ай бұрын

The moment the first exhaust bolts came out. I by muscle memory said FK you.... And I apologize. I'm from the salt belt. 🤣 Thanks for the help

@jameshernandez5300 2 ай бұрын

What are the sizes?

@acd3830 2 ай бұрын

One of the best video he explained ever thing thank you

@christopherzink1938 2 ай бұрын

Sorry my comment should read; “please let me know where you found the valve spring compressing tool!” Thank you for your assistance.

@christopherzink1938 2 ай бұрын

Please let me onow where you got the calve speing compressing tool! Thanks in advance for the help.

@jimmy_Ross 3 ай бұрын

lol i used some cheap fuses and fuse holders from ebay and they melted not cool not cool lol

@209farmz 3 ай бұрын

Where can I get an aftermarket carb with the heating plug ina

@Chingon7-xy8wb 3 ай бұрын

Does the PCV valve come with the covers?

@gregt2911 3 ай бұрын

I’m working on putting a fuse box in my rzr, is there a reason to not run power, key on, and neg from the bus bar?

@vadimnesen8060 4 ай бұрын

Im having this issue and to see the freat lenghts people go to make a chevy engine is crazy, im used to Toyotas v8 that dont need any knowledge or attention for 300k miles

@C--2 4 ай бұрын

Run it for 500 hours under load and get back to us.

@ghostlight69420 2 ай бұрын

what do you recommend for someone who needs a generator for a few weeks out of the year?

@SkinnySkinch Ай бұрын

@@ghostlight69420 any of the Chinese brands will do fine. if you run it daily or weekly all year long it may feel worth it to buy the Hondas but the harbor freight units are honestly really good for the money. you can buy 3-4 of them for the price of 1 Honda. You do the math. Buy the warranty and you pretty much have a HF anywhere you travel to it's hard to beat it.

@spockmcoyissmart961 4 ай бұрын

I'm glad there are options ($-$$$) for people, however, please look into available repair parts before you purchase any small engine product.

@ghostlight69420 2 ай бұрын

cheap generators are disposable convenience items. if you actually need a generator buy a honda. people who will only use this twice a year dont need that nor care about parts. that said whats a good value generator like this?

@spockmcoyissmart961 2 ай бұрын

@@ghostlight69420 Some people may not be able to afford honda, but can tinker and keep lesser quality machines running. They'll need parts.

@HUREY-CUSTOM-HARDWOOD 2 ай бұрын

BS Honda is notorious for not having and discontinuing parts. This thing will run just fine with regular oil changes and proper storage.

@ghostlight69420 2 ай бұрын

@@HUREY-CUSTOM-HARDWOOD good to know glad i saved my money

@jamesclark2363 4 ай бұрын

Please Help!! Is it possible to replace the lifters without removing the heads?

@thereaper2762 5 ай бұрын

Great vid! All I've been able to find is complete manifold swaps but I think the little donut seal is my real issue. Just wanted to know how much wiggle room I'd have or if I needed to keep going down the pipe unbolting everything. Would you or anyone recommend any type of paste or gasket material to help seal up and prevent failures?

@NicnacSaurus 5 ай бұрын

Thank you so much for this, you have no idea how exciting it is to find the tear down of the exact same year and model of my jeep! I may have had a bit too much fun in some water and I am part of the way through the tear down and wanted an idea on how deep i could go without fully pulling the engine. Fingers crossed that i can skip the pistons all together.

@davestoltenberg9187 5 ай бұрын

I owe you a beer… I’ve referenced these videos countless times over the past few weeks as I’ve dug into a used JK I picked with high oil consumption. Wouldn’t have been able to do it without ya. Thank you very much for putting this series together 👍🍻

@calebcampagna3801 5 ай бұрын

What size was the belt, tia

@brianlehnhof729 5 ай бұрын

Thanks for the video. What model is this RZR you are working on?

@TimJackson-x2n 5 ай бұрын

Thanks for this information.

@mickm.121 6 ай бұрын

Thanks for the video! I changed mine out today and you made it pretty easy. The little thing that holds the choke fell out when I took off the carb. I had NO idea what it hooked to or how it went back in. Came in, pulled up your video and saw where you hooked it to the choke. Worked great. Thanks!

@timbrwolf1121 6 ай бұрын

I have this series saved. Going to be top or bottom on my jeep soon. I don't own my own torque wrench yet. How many ft /lbs do you think I'd need to do most anything on the jeep?

@mariarappana 6 ай бұрын

Thanks! Just the video I was looking for!

@robertdbettis 6 ай бұрын

I wish that you had included installing the push rods and rockers before the valve cover. Is there a special process for installing them? Did you use assembly lube? Or did you completely smother them in oil like i see other people do online? Thanks for the vids

@alvinrobinson6998 6 ай бұрын

Did the truck smoke when cranking?

@aubreyholmes1235 6 ай бұрын

Nicely done

@raveger0100 7 ай бұрын

Hold old is your daughter to be in the bump seat? my guy is only 2 but want to take him out with us!

@TheDadBodWorkshop 7 ай бұрын

We had her in it up until about 4ish but I think she would have stayed much longer in it. Two was a good age for my daughter to start in it

@ballzdeep1017 7 ай бұрын

On the beginning picture, when it says all accessories to the fuse box does that mean the actual access or the rocker switch?

@austindotson4801 7 ай бұрын

So are the valves self adjusting or do I adjust them and if they do need to be adjusted I’d like to know how

@TheDadBodWorkshop 7 ай бұрын

You'll need to adjust them yourself. Look up how to adjust rocker valves.

@w.c.6678 7 ай бұрын

Good vid bro.

@jflizzle457 7 ай бұрын

A king in the wild, thanks you tube lawnmower carburetor daddy!

@cliffford2897 7 ай бұрын

I did both of these and my five point three still consumes way too much oil. New chevy's are just plain junk.

@eltonyancey6426 8 ай бұрын

Great video. thanks a bunch.

@brad9899999 8 ай бұрын

Have a link to the compressor? I’ve been looking for one with no luck.

@meganobrien6585 9 ай бұрын

Thank you!

@TheDadBodWorkshop 8 ай бұрын

You're welcome!

@stant.m4233 9 ай бұрын

I think i need to change mine too. I have rear end sway when i go over bumps in the road.

@Squiggly.Noodle 9 ай бұрын

0:08 Before 5:30 After

@markellrobinson4447 9 ай бұрын

Great video helps a lot

@u.s.aarchangelforgod3679 9 ай бұрын

You changed only the driver side or both valve covers?

@deadlata9767 9 ай бұрын

Only driver side

@u.s.aarchangelforgod3679 9 ай бұрын

@@deadlata9767 thank you 🙏

@GametimeSlime 9 ай бұрын

I came to this video because I’m in the process of identifying where my tick is coming from. Allot of people say lifters and rocker arms. Everywhere on KZbin I’m only seeing people fix that issue on the 3.6 but none on the 3.8. To me they look totally different what would I replace that whole shaft arm?

@dustinbingman382 10 ай бұрын

Is the driver side (thinner one) directional?

@MOBOutDoors 10 ай бұрын

Thanks a lot for you’re video Brother Hopefully that was the issue you made it so much easier for me 👍🏻🤟🏻

@texascrossbowdude636 10 ай бұрын

This is probably pisted somewhere but want to know what is the difference between the original cover and the new style and can the pvc valve be replaced when needed on the new cover?

@deadlata9767 9 ай бұрын

He shows both covers in the video. The older style has a circular hole, while newer one is square. Some people still have issues with square hole one, and will drill some drainage holes. This engine doesn’t have a real pcv valve it is just an orifice. You can test if oil is coming out of the pcv valve by just running a hose off it into a some type of container and driving around. Some people use these catch cans permanently, and they are sold as aftermarket product.

@jefferyjunkin9808 10 ай бұрын

I know this is old but you do realize there is a spinning shaft and hot coolant lines in that tunnel. I run wire through it all the time but I pull covers and zip tie to the loom. Seems like a bad idea without pulling the covers off. Or am I just paranoid?

@pc6uru 3 ай бұрын

Not just paranoid. I do the same.

@aaron5303 2 ай бұрын

I was thinking the same thing. I dont mind the extra work to make sure the wire is run safe.

@joshuazirkle4616 10 ай бұрын

Thanks first time I learned about it even having gaskets. I'm replacing the flange gasket on my 05 f150 4.6 xl . I didn't know which way it goes because the stock cats didn't have any to begin with. Thanks a bunch

@Drew.407 10 ай бұрын

Do you need to disconnect battery first?

@tmindek1956 10 ай бұрын

Where can I find new rings for the ttr90. Looked everywhere they only sell oversize or the 125cc. Please help

@mc.yohann 2 ай бұрын

Pretty sure wiseco sells em

Ең жақсы KZbin

Пікірлер