EverydayJay

Пікірлер

@Arhamkhanshark Ай бұрын

I was trying with basic hot gun, which usually used for home or school stuff but not happening, cant able to remove, shaft adapter so easily...

@GolfPro-ve2ep 4 ай бұрын

Good stuff. Using the Driver head to remove adapter was the step I was missing. Cheers mate!

@silkysteve25a 4 ай бұрын

Surely twisting the head off is damaging the shaft!!

@iivv_nn 4 ай бұрын

Don't apply clear over 1000 grit. It will begin to peel. Clear coat adheres best to 800 grit

@BS-fs6kx 5 ай бұрын

How long did it last before it started to show signs of sun damage etc again ?

@U2binator 5 ай бұрын

I sold it a few years later and it looked good until then, I kept it in the garage though, might be different if was outside.

@enriqueesquivel7542 6 ай бұрын

😂

@Mackahroney 6 ай бұрын

I tried this last night and the damn thing is on tight haha i was using a heat gun but im use a torch tonight

@tdmmcl1532 Жыл бұрын

for any concerns about UV protection (prevent discoloration over time), this method will work, but one also needs to add some UV protective wax or ceramic UV sealant AFTER the crystal clear HAS CURED. the product rustoleum crystal clear used in this video has limited UV protection. It is more or less a durable hard shell, but not the same as a automotive UV clear...factory headlights have a coating that has a UV clear, and obviously that degrades over time. So to restore you have to think about this in the same way that factory manufacturers headlights are produced. There is a hard shell with a UV component. So when you restore, the hard shell is restored, but then you will need to give it a UV coating to help produce a long lasting shell that will not fade and discolor over time. There are various top coatings that will do this. Look for a standard auto wax that has a UV component...almost all of them do. I would NOT use a cleaner wax...this has a fine abrasive...Some have good results with ceramic sealants that isn't really a wax per se but a longer lasting coating that produces a harder shell than conventional wax. I have used mothers ceramic spay wax ...it's easy..it does not leave a color film..and ii has a UV component. Like all auto body "waxes" headlights are no different. It's a maintenance item: you will need to clean it periodically and apply new "wax". This more than anything preserves the headlight to a clear finish that will last. For those who live in areas where road salt in the winter is a common element, this finish wax maintenance needs to be done far more often. And of course, parking outside in the elements is going to degrade faster than a car that is garaged. The best rule of thumb is not allow the headlight to begin to fade...preventing that from happening is a task that might involve simply making it a once every two months task...something like that. Where you clean the headlight and apply a UV wax or sealant.

@gabedestellano Жыл бұрын

Wtf is the grain of the headlight?

@brianShannon-jd7zh Жыл бұрын

Great idea.With a little heat came right off. You are the man

@rickieconley3298 Жыл бұрын

Waste of $ ruined my headlights do not buy this garbage

@GeorgeJansen Жыл бұрын

How long before a reapply? 6 m 1y? Thxs

@U2binator Жыл бұрын

Case by case. Depends if you park in a garage, climate, etc.

@bradystokes2001 Жыл бұрын

I don’t have any sort of a setup in my garage but I have a rubber clamp and can use a torch…can I get the same result? I just want to remove a TM sleeve off this shaft and install a Callaway sleeve…

@U2binator Жыл бұрын

I don't see why not, your setup sounds better than mine 😃

@andrewp6230 Жыл бұрын

What kind of epoxy did you use?

@chadfortman8098 Жыл бұрын

I doing it with 2k,clear I went down that route before with normal clear coat it yellows faster. Cheep car manufacturers need go back to glass

@siegfriedk728 Жыл бұрын

Toller Tipp ,danke !! Thx

@JG-gw3up Жыл бұрын

The RX450H factory tow-prep package is Lexus option "TO". It has 3 components: (i) upgraded radiator fans; (ii) adds a transmission oil cooler; and (iii) adds a trailer light wiring plug (brake, turn and running lights) up under the left rear side. Using a hitch for a bike rack or platform carrier is one thing. But without option "TO" pulling a trailer (without the upgraded radiator fans and transmission oil cooler) is an entirely different matter. Without option "TO" you pull a trailer at your own risk. That is why some dealers refuse to install a hitch on RX models without factory tow-prep option "TO".

@michellededeoph.d.648 Жыл бұрын

Yep! They refused to do mine. I ordered a CURT hitch, wiring, etc. and extra long bolts & spacers to do my 2020 450RX F-Sport. It's mainly used for a bike rack, but I need to tow our Troop trailer every now and then. Now I'm just trying to get the lights to work...if anyone knows how to get that done, please post!

@shyamgid4082 2 жыл бұрын

A lot of shops say most mfrs haven’t made a tow package for the 2021 but have it for 2016-2020. Do you why the 2021 is different/more difficult?

@U2binator 2 жыл бұрын

I think that was a redesign year so it must have gotten more difficult with the redesign.

@kantexplain 2 жыл бұрын

Could you use a gas cooker flame instead of a torch?

@U2binator 2 жыл бұрын

Possibly, I think they are around the same temperature.

@davidmacdonald8021 10 ай бұрын

Yes I used the gas hob method to remove a putter head. Heated it, stood on the putter head, pulled it out.

@Drew__Films 2 жыл бұрын

NEED ADVICE!!! Plz real this quick story down below to help me! So I just purchased a barley used 2018 Nissan Rogue. The car is pretty much mint but my OCD could help but notice some slight fog on my headlights. So as I stopped by a quickcheck on my way home I seen an AutoZone and realized this is a perfect time to get a Headlight restorer. So the man their recommended the “ 🐢 Turtle Wax: Headlight Lens Restorer kit” that from my reach before hand was always either number 1 or in the top 3 of best headlight restorers. So after thinking this was all I need. He INSISTED I but “Rust-oleum Acrylic Enamel 2x Coverage Paint+Primer Automotive Grade Clear Gloss” to put on after I used the 2 basic coat and Cleansing wipes it comes with to make my headlights be clear for up to 2 years! He also made sure to tell me that it’s important to skip using the spray lubricant it comes with idk why. So, I will post an Amazon the link to the product I bought and plz lmk if this spray is not only even necessary but a good product that won’t ruins my car if I do the same steps you did in your tutorial. (I’m adding spaces in my link incase YT deletes my comment over using a link) www. amazon. com/gp/ aw/d/B07GKY46NJ /ref= cm_cr_ arp_mb_bdcrb_top ?ie=UTF8# aw-udpv3-customer-reviews_feature_div

@GolfTubes 2 жыл бұрын

Is it possible to remove the screw within the driver head? My screw is .25mm too small for the shaft I got and I’d rather change it than change tips if possible..

@U2binator 2 жыл бұрын

That's a good question, you might search KZbin for how to remove the screw, you may have to drill it out.

@GolfTubes 2 жыл бұрын

@@U2binator yeah I’ve had a look and found nothing! Guna have to just swap the tips over from my old shaft to the new one. Weird how some driver adapter kits come with new screws and washers so no idea but oh well! Thanks for the reply and the informative video! Hopefully I don’t cock it up lol

@EscalanteFlyFlipper 2 жыл бұрын

Clever to use the head.

@james10739 2 жыл бұрын

I have sanded and buffed mine but it just doesn't last but I just did it again but I was thinking about sanding that back down and painting them but I was curious if that spray paint last if you still have the care what they look like I see people doing the same but with like 2k clear but I don't want to spend like $25 for a can I use like 20% of once and then have to throw it away

@nathantran9675 Жыл бұрын

2k clear is definitely worth it. I did 3 coats. Used 3/5 of the can. Quality and longitivtiy is there.

@iolivier3305 2 жыл бұрын

Do you know if this is the same for the 2010 450h? Is the wiring harness connector in the same place?

@U2binator 2 жыл бұрын

Sorry, I'm not sure

@michellededeoph.d.648 Жыл бұрын

@@U2binator Did you trailer hitch lights work? I couldn't get mine to work and I'm still looking for a solution. I installed the correct wiring harness, and connected it in the trunk under the panel, but still no-go on the lights.

@U2binator Жыл бұрын

@@michellededeoph.d.648 Yes everything worked great, I'm wondering if there's just a fuse that needs replaced.

@js7427 2 жыл бұрын

Saved me from buying a puller. Came off very easy with a heat gun, thank you!

@THEREALBIGCHIVO 2 жыл бұрын

Uv resistance clear

@ZZ-topp 2 жыл бұрын

Anyone ever tell you,you sound just like kevin Costner,i hate getting the runs

@U2binator 2 жыл бұрын

Haha never heard that before but thanks! Yes the runs on the spray are annoying!

@jaydub570 2 жыл бұрын

What siza are the screws tor remove rotors?

@U2binator 2 жыл бұрын

I'm not sure, they are pretty good size, it was a big screwdriver

@jaydub570 2 жыл бұрын

@@U2binator i just tracked it down. It’s an 8 x 1.25. Thanks for the vid!

@U2binator 2 жыл бұрын

@@jaydub570 Good to know! Thanks for the comment! Are you working on this now?

@KeriRautenkranz 2 жыл бұрын

I did this almost 2 years ago with the Rustoleum 2x UV resist, and had some minor crazing. After letting it harden for a couple of months, some wet sanding and polishing improved matters. While most of the lenses still look good and vision is excellent, the paint is starting to flake off on the top surface. Previous to this, I had tried a rather expensive headlamp coating spray formulated to be cured with UV lights. That lasted less than a year and didn't look as good as Rustoleum. Next time, I'm trying 3M's or Sylyainia's UV sealant.

@cakesodomy4358 2 жыл бұрын

I'm not sure if it holds true to clear plastic headlight covers--but I would assume so-- Paint seems to stick a lot better to most things after cleaning with a degreaser and using rubbing alcohol/tack cloth right before spraying.

@james10739 2 жыл бұрын

Ya what the other guy said and you are probably better off not going that high in grit sand paper like 1000 is about what I am thinking but definitely needs to be cleaned with alcohol before painting and I think 2k clear is probably the play if it's worth it to you and or you have enough to paint before like $25 for a can that will mostly go bad is not ideal I just did mine and was wet sanding like 3 or 4 days later and cleaning with alcohol and the paint just gummed up and came off I was using the Rust-Oleum universal clear so I don't know it probably would have been fine if I didn't use the alcohol but still

@JD-wm4uv 2 жыл бұрын

I'd buff it with compound get all scratches out then clean thoroughly with alcohol then use the clear spray in the end ...

@james10739 2 жыл бұрын

@@JD-wm4uv I don't know how well the paint would bond if you did that

@jdsirois1 2 жыл бұрын

Does the torch ruin the adapter at all?

@U2binator 2 жыл бұрын

I wasn't trying to save the adapter buy it could possibly yes, be careful, one person commented you could wrap it in aluminum foil prior to heating to help, you could try that.

@charlesfitzgerald3201 2 жыл бұрын

i just tried it and i used a torch not a heat gun and worked great ,, i was very carefull to not burn the shaft and was able to save the ferrul ,, heating only took 20 seconds ,,, pulled it off with plyers , no shaft damage , new adapter for different driver ,, done deal

@frank9240 3 жыл бұрын

FIRST OF ALL, YOU DID NOT WET SAND IT ENOUGH !!! YOU HAVE TO AT LEAST CO DOWN TO 1500 GRIT FOR YOUR FINAL COAT............ALSO, IF YOU PUT THAT CLEAR CRAP ON IT YOUR'E STUCK WITH IT !! AND YUP, YOU WILL MAKE A MISTAKE....TRUST ME, I HAVE DONE THIS BEFORE......YOUR'E BEST BET IS AFTER THE 1500 GRIT DEAL, GET SOME RUBBING ALCOHOL AT YOUR LOCAL CVS STORE, AND A ROLL OF PAPER TOWELS, AND SATURATE THAT HEADLIGHT WITH A FOLDED PAPER TOWEL. LET IT DRY FOR 10 MIN, AND FOLD ANOTHER PAPER TOWEL, AND SATURATE IT WITH (WD-40) , AND RUB IT IN ON THAT HEADLIGHT.......(watch what happens) AFTER 1 MONTH, HIT IT AGAIN WITH WD-40.....(DO IT) !!

@almightyyy4907 3 жыл бұрын

That’s my dad… he’s the white hulk

@ubb4me 3 жыл бұрын

Can't you screw the clubhead partially onto the adapter and pull?

@U2binator 3 жыл бұрын

That's what I did basically, the glue literally had no force left at all so you can pull, twist, whatever.

@mariad750 2 жыл бұрын

Yes, put a washer on the tip screw and pull on the washer. Ideal if you want to save the shaft and not twist loose the graphite fibres.

@richardblencowe3924 3 жыл бұрын

Top tip doing it with a gas torch is wrap some silver foil around it a 2 or 3 layers is plenty, stops any heat burns.

@Arhamkhanshark Ай бұрын

After destroying top tip, I saw your msg or trick 😅

@doanhuynh6939 3 жыл бұрын

Very nice thank you. But I was wondering does the kick sensor for the trunk still work?

@U2binator 2 жыл бұрын

Sorry I didn't see this. I'm not sure, this is actually my parents' rig.

@michellededeoph.d.648 Жыл бұрын

It works for mine, and I have the F Sport...which takes special care to install - essentially I had to add longer bolts and spacers to get below the special trim (and not have to cut into it!)

@queenqutie9236 3 жыл бұрын

You will get a better result if you quit feathering the paint.

@kiranrajendran7734 3 жыл бұрын

Dude, you're a genius.

@concentrationmusic6192 3 жыл бұрын

Never a heat gun..5 seconds per side with the torch

@jacoblynch6977 3 жыл бұрын

I'm torn. First coat looked great! Second coat done exactly the same, but has a lot of orange peel. Should I do a third or will that make the orange peel worse?

@U2binator 3 жыл бұрын

How long did you wait for the first coat to dry?

@jacoblynch6977 3 жыл бұрын

@@U2binator about 20 minutes. It was dry to the touch

@U2binator 3 жыл бұрын

@@jacoblynch6977 I'm wondering if it was something to do with drying time, where do you live?

@jacoblynch6977 3 жыл бұрын

Hmm maybe. I'm in Colorado. Pretty dry here. It doesn't look bad though. I'll let it be and see if letting the other headlight dry longer helps. Thanks!

@U2binator 3 жыл бұрын

@@jacoblynch6977 You bet!

@rolling_wit_cedphillips7408 3 жыл бұрын

Thank you for the follow up.

@johnhoward2481 3 жыл бұрын

Fantastic!!! You made it look so easy. Thanks.

@peterbrennan4231 3 жыл бұрын

Hi . The tork screw snapped in the adaptor on m4 .. can the adaptor be removed when the screw is still in the adaptor..thanks

@U2binator 3 жыл бұрын

Honestly I'm not sure, but if you can't, depending on the size of the torque screw you could probably drill it out and then get the adapter off. And then buy a new torque screw

@brianarvish2060 3 жыл бұрын

Is that Jr.?

@paulkellygolf 3 жыл бұрын

Do you have a trick for removing the adaptor on M series? They have a plastic casing on them that melts when heated.

@U2binator 3 жыл бұрын

I don't. Are you sure it's plastic?

@paulkellygolf 3 жыл бұрын

@@U2binator absolutely. I've done numerous ones the past year. The top of the adaptor has a plastic casing that indicates the settings. When you apply even a little heat it melts. The adaptor is still perfectly functional but doesn't show the settings and looks unfinished.

@matt7iron 11 ай бұрын

@@paulkellygolf yep mines isn't metal like the old days now it's hard plastic and melts, I'm gonna broil some hot water and let the water sit for a minute then stick the tip of the adapter into the water to cover only the adapter, I'm doing it today.

@Arhamkhanshark Ай бұрын

@@matt7ironwhat is the result