Tyler King

Пікірлер

@derrickcharette2970 16 күн бұрын

Thats fuking to load 🤦‍♂️

@MichaelByerly-g9u 2 ай бұрын

I had exactly same issue did plum 3 years prior just replaced o2 also 1 yr ago had to redo plum add aluminum plate didn't do o2 wouldn't idle when warm no vacuum leaks replaced idle valve cleaned throttle plate replace throttle position truck only pulled 14 in of vacuum though it was to low . I had the same vacuum sound around throttle .changed o2 and Idles perfect.

@RudySueoka-np9in 2 ай бұрын

That's why I don't buy none from the auto parts store.I buy straight from the dealership.May cost me more, but I'll tell you.One thing, it's gonna last a hell of a long time before you buy from the auto parts store.I know what I'm talking about.Cause I got 2 of them dodged Dakota's both from Scott 59 and both of scott's standard transmissions and they both run good.I know what I'm talking about.Because i've been around it so many times

@RudySueoka-np9in 2 ай бұрын

😮

@destroytheilluminati770 2 ай бұрын

Have a 98 dakota that would randomly run like crap, did the usual tps, map/maf, plugs wires cap/rotor. cleaned throttle body/AIC. verified fuel pressure. still ran like crap, finally one day it started acting up on me and it pissed me off, i was on a really long straight stretch of road and i just floored it wide open and held it there for 2-3 miles, bucking and missing like crazy and finally the check engine light came on, got it back home, pulled codes for both O2 sensors, replaced with Bosch sensors and its been happy since, I can't believe it ran like crap the entire time like that and not throw a check engine light

@arturos.l.2248 3 ай бұрын

That sounds insanely loud to me and i dont even have headphones in.

@r3dlavigne 5 ай бұрын

what bed rail caps are those?

@Tylerking313 5 ай бұрын

Wade part# 72-41411

@r3dlavigne 5 ай бұрын

@@Tylerking313 damn that was fast thanks bruh, you literally have the dream 2nd gen build hope u keep it for a long time

@mr.danknuggz4767 5 ай бұрын

Just got my first 5.9 01 2500

@TheRedFoxYT 6 ай бұрын

my god I just got a 95 Ram with a 5.9 its stright piped and sounds nothing like yours damn that's hot. Also love your tires

@ianholmen888 6 ай бұрын

What intake manifold is that? It’s not the barrel one

@Tylerking313 6 ай бұрын

@@ianholmen888 it’s the stock intake manifold

@globallo3057 7 ай бұрын

I changed the IAC. It started right up and stay running drove away from home for 30 minutes and it stopped when I slow down and pulled into McDonald's. Now it's doing the same won't stay running without accelerating could drive with 2 feet😮‍💨 someone help

@Donttriphomie 6 ай бұрын

Did you fix it?

@ericdallas3765 8 ай бұрын

My dodge use to stall at stop lights or stop signs as it got worse it started to die when i change gears.. anytime you can think of? Im tired of spending way to much money that i dont have

@lilscxtty.1767 7 ай бұрын

I had that issue taking off my exhaust I had the best luck cleaning the o2 sensors and using a little seafoam if I were you get a decent code reader and start looking at live data

@flyingwalrus7831 8 ай бұрын

This is what youtube is all about. Bravo sir. I have a 98' v8 mag myself I just got this is so awesome to see!

@zachmeyer8962 9 ай бұрын

I’ve got a 99 and a 98 with the 5.9 an then got an 01 with the 318 the 318 is straight pipped same way I plan to do one of the 360s but not at this time

@thatkiddalton 9 ай бұрын

What exhaust setup are you running also does it have cats or no?

@B-BoyBorti 9 ай бұрын

I have a 97 Ram 1500 and it's got the 5.9 also, but obviously yours looks much nicer. Had it straight piped with no cats for about 4 months before cops had enough 😅

@ozcorr909 10 ай бұрын

my truck runs great without any for issues for about an hour then starts to sputter and stall at low rpms ,was yours doing this or was it running rough from the start?

@Donttriphomie 6 ай бұрын

Did you fix it?

@krisdabaliguy6850 10 ай бұрын

I’ve got a van, a 1992 ram b350 with the same engine. I’m so tempted to do the same thing to it and I live in Louisiana so I doubt anyone will care but I live in my van so I’d feel bad for anyone nearby if I idled my engine. My cat and muffler are both welded. I wish they were screw on so I could just put a straight pipe adapter and test try it

@tigerboy60 Жыл бұрын

What are the OE brand 02 sensors?

@Tylerking313 Жыл бұрын

Probably ntk or something equivalent, if not that a mopar sensor from the dealer if you can still get them

@0nux229 Жыл бұрын

amazing video i’m doing the same now thank you

@warnerdaniel4241 Жыл бұрын

Do the o2 sensors read fine with out the cat? Tried everything on mine, I’m assuming my cat is clogged as well!

@Tylerking313 Жыл бұрын

Yes it’s been catless for years and no check engine light

@warnerdaniel4241 Жыл бұрын

@@Tylerking313 dang that’s awesome, I was worried if I deleted my cat that it’ll throw codes. I have a rough idle as well and occasionally throws codes for Evap leak or running rich in bank 1, was planning on deleting the cat and seeing if that solves my problems, I’ve replaced a bunch of stuff and still nothing has worked

@Tylerking313 Жыл бұрын

@@warnerdaniel4241 deleting the cat will only help you haha it will sound better and more hp, hope you figure it out!

@Fleetwoodjohn Жыл бұрын

2 days or 2 months does it really matter? I’ll wait for an honest answer

@Tylerking313 Жыл бұрын

@Fleetwoodjohn Жыл бұрын

@@Tylerking313 Once a motor is cold it’s cold.

@Tylerking313 Жыл бұрын

@@Fleetwoodjohn Once a motor is warm it’s warm.

@aaaa_sss Жыл бұрын

wow nice

@zacharykeith5464 Жыл бұрын

I applaud you sir for owning literally the sexiest truck to ever roll off of a factory assembly line and letting the old V8 motor that resides inside that beast to sing her beautiful song loudly and proudly as all V8 motors should

@mikedapunk Жыл бұрын

quietest next door neighbor.

@Tylerking313 Жыл бұрын

*badass

@MarlinBe0n1 Жыл бұрын

I heard it'll ruin your valvetrain having no back pressure in exhaust

@usMarinecuv902 Жыл бұрын

He has a full exhaust. So no risk of damaging valves

@jordanmercredi3740 3 ай бұрын

Wrong

@JuanMoncivaiz-r9x Жыл бұрын

My friend good after noon ! Can you provide what size of flow master its that one please. Thanks

@Tylerking313 Жыл бұрын

Part# 717947 , it’s the same muffler that comes in the kit

@irishboi7383 Жыл бұрын

Did you use anything for the o2 sensors? Im wanting to do a full straight pipe but i also want it to run right

@Tylerking313 Жыл бұрын

No spacers or anything, truck runs fine with no check engine light

@kalenweber5390 Жыл бұрын

how does it pop like that bro

@Tylerking313 Жыл бұрын

The power of a stock 5.9 magnum 😂 but it mainly does it when you are in higher rpm in 1st or 2nd gear and let off the throttle

@masonchapman1575 Жыл бұрын

My truck has this issue as well but mine cranks starts and falls on its face if I feather the gas it’ll stay running but runs like crap when I release the gas it dies sometimes idles at 300 rpm’s

@Tylerking313 Жыл бұрын

My first guess would be check your fuel rail pressure or check if you have the firing order correct on the distributor

@damonwayne3307 3 ай бұрын

Hey did you ever figure it out mine just started doing same thing.

@jasonstewart8973 Жыл бұрын

Mine has no light but it's Smooth but when ideling it's just quick miss like 1 cylender .it's smooth then bam then smooth agian ant even close to quiting. I bet that's it man 97 318 gonna try it.good vido

@jorgeg5369 Жыл бұрын

Any luck? I just started having the same symptoms you described but on cylinder 4 instead

@juancastaneda9844 Жыл бұрын

So much noise 💀

@MegaExCaliber Жыл бұрын

That is one hell of a cold start

@KeepIt4Reall Жыл бұрын

Sounds like it came from depth of hell. I approve my turn

@ojpimpson3343 Жыл бұрын

Whats the gas mileage on these trucks? Any tuning capabilities for better mpg?

@willbillystreetrods Жыл бұрын

The 5.9l get 10 to 12 mpg not sure on the tuning part

@fish_R_stinky69 Жыл бұрын

@@willbillystreetrods Damn.

@k1ll3rcl0wn6 11 ай бұрын

@@fish_R_stinky69I have a 2000 with the 5.9 and i get around 10-11mpg city/ 15mpg highway.

@dakota5041 11 ай бұрын

@@k1ll3rcl0wn6my old 5.2 got 13-15 depending on wind, friends 5.9 got about 11-13 if they weren't hauling hay

@crazeguy26 10 ай бұрын

@@dakota5041sounds about right

@parabellumgunner7 Жыл бұрын

I miss my 2nd gen I have a 3rd gen now with a 4.7 might go back or swap this baby to a 392, also what bulbs do you have for those reverse they are pretty bright

@Tylerking313 Жыл бұрын

Nice nice and they’re just some cheap ones from Amazon, Nilight LED Pods 4PCS 18W 1260lm , but have held up great for years, just wired them into the factory reverse lights

@colt8282 Жыл бұрын

Thank you sir. Ima try this. Cause I’ve been throwing parts at mine and seeing if something sticks.

@JeffJohnson-1982 Жыл бұрын

This is what my W31 sounds like with Flowmaster Delta 40s

@jimh2061 Жыл бұрын

Sounds great!

@jjthemechanic6675 Жыл бұрын

Does it pop when you let off or was I hearing things

@Tylerking313 Жыл бұрын

It pops a lot haha

@cjsskatess Жыл бұрын

Just picked my 01 1500 5.9 last week couldn’t be happier with this truck. Those 33s are bad ass. Haven’t done too much research yet will they fit stock suspension ?

@Tylerking313 Жыл бұрын

They are great trucks, I did a 2.5 level in the front and they rub only turning to full lock but it’s manageable, I’m assuming it would be worse with being stock height

@kalenweber5390 Жыл бұрын

i only rub on the frame when fully turned right

@shuffleday1234 Жыл бұрын

I fit 35”s on a front leveling kit, it barely rubs the wheels wells and the front control arms but its not bad at all

@dwaynebottcher8714 Жыл бұрын

Did your truck cut out and back fire and miss too my truck has that hissing and idles like crap like it has a big cam and cuts out then it will run fine for awhile

@Tylerking313 Жыл бұрын

It would only idle rough and hiss but when I tapped the throttle it would go away

@dwaynebottcher8714 Жыл бұрын

@Tyler King that's what mine does too but sometimes it stumbles and acts funny then it runs fine

@Indeewoods Жыл бұрын

So did it do it when you first started the truck or only after it warmed up a bit and went into closed loop?

@Tylerking313 Жыл бұрын

@@Indeewoods it would be completely random

@tonysajkowski3534 Жыл бұрын

The hissing is usually iac valve..hope this helps

@skylerbaldon3851 Жыл бұрын

what o2s did you use? i had a high voltage code, fixed the harness wiring but its still idling rough, it has ntk 02 sensors in the truck but still running bad.

@Tylerking313 Жыл бұрын

I used Bosch, if you had a high voltage code that means it’s running rich, I would look into the causes for that if the sensor you put in is new, check the plugs wires, check for vacuum leak etc.

@alphaomega311 7 ай бұрын

Ntk sucks in my opinion had new distriutor cap/rotor wires and I believe spark plugs all went bad in a month and when I went to take the plug wires off the core ripped right out even with silicon grease inside