@anio6865 not very often, it still working good

@guffity yeah, but 850w enough and it's platinum class

@@mynewtoys5468 seems more like a downgrade to me, if you were gonna upgrade your psu, make sure it has more wattage, and maybe even a higher tier, a lower tier will just kill any plans of putting powerful components as wattage requirements are getting higher and higher

i have an r12 but i upgraded from 550w gold to 1000w gold to suit my dual gpus

@3DUB212 those are all stock , I buy two jetson to do it

@@3DUB212 stock motor ,I buy two to do it

@@swodin8199 no , still riding it

I second this question

i think its easy,not that flexible as wheel

It work as the video show, need fan in, then press skip at the starting,

Thermaltake Core P3

2100cad

@@mynewtoys5468 🤣

Did u have to get a new motherboard?

@@ZanderV-l6eYes. I felt the bios was not real stable so I got an ASUS motherboard. I moved the memory over to the new board and upgraded the processor a little. With the original R11 every time I did something in the case it didn't want to reboot. Even just unplugging and plugging the processor cooling fan caused it to not want to but for 10-15 minutes, just cycling over and over.

@@gsxrsquid did case swaping ruin your mother board or was just shit from the start?

@@ZanderV-l6e I cannot say it was the entire motherboard but the bios did not want me touch anything inside the case. If I did it would either lock up on boot or take forever to reboot. The first time I upgraded memory it would not boot, just kept restarting. Finally I removed all but one stick. It took a couple minutes but finally booted. I then added the second stick of memory. same thing. Then I added the final two sticks and it took about five minutes of just rebooting itself over and over before it finally settled in. I have the liquid CPU cooler and wanted to install a push/pull set of fans. I unplugged the fan to get it loose. When I plugged it back in (totally stock) It locked up and did not want to reboot until I messed with it. I never removed the motherboard from the case. I just took a case I had, bought a new motherboard and moved memory, processor and cooler to the new case. Everything plugged in and he computer booted first time. no problem.

I bought a RX 6800 XT to test and yes it is too big for the R10. I just cut a hole in the case so when I need to test any big cards I can just take off the front plastic piece to test.

Is the fan 4pins?

I just twist it,(the left side)

@@mynewtoys5468 thanks!

I think all details are in this video, connect the throttle signal wire together(you can only separate it from one controller) , then put brake wire together(2 and 2), also peddle assist, you don't need connector, just cut the connector off and connect them tight,(also you can do it like mine using extra connector that doesn't need cut the controller wire) that call sm connector with 2pins and 3pins, need to figure all female or male, I can't remember now, that's all you need

It just require a signal wire, normal throttle has 3 wire which positive, negative and signal, this mod is good for tail, hills and heavy load, if you want go higher speed,with 48v,it may little danger that front wheel has too much power and slip,cause injury, if you choose this mod ,stay at 36v battery

@@mynewtoys5468 Thanks! I mostly want to this mod for off roading purposes and Im happy with the stock speed. Thanks

It's the cheapest way for more torque and speed when I doing this at that time, I have been happy with it a while, I like the small bike, there are not much higher torque and higher speed 14inch bike at the market, I got a 50km speed 20 inch fat bike,still love small bike that easy storage and comfort

Sorry, wrong answer, doing upgrade and customize is fun

@@mynewtoys5468 I wonder if the small tires cause a problem? Mountain bikes have bigger tires to absorb shock better (in general). Doesn't small tires do the opposite? The ride would "feel" more bumpy uncomfortable. . I just "pre-ordered" a wired ebike; it will arrive next month; maybe Aug/Sep 2023. I was interested in looks (I wanted it to look like a regular bicycle, hidden electrical components), the top speed (it can go over 45mph, or 72kph), and a minimum travel distance (up to 80miles, but I really only wanted about 30 miles). Since i was planning on using the bike for door dash delivery to make my money back on this investment. Spending $2000 on this bike means I need to work about 200-300 hours to make my money back. I felt the cost was reasonable (I'm poor). . In America, if you use a motorcycle or a ebike (that goes over 20mph); then it is against the law to be on sidewalks or walking paths. Most people get angry when they see anyone driving on the sidewalks with a motorcycle (or something that looks heavily motorized). The bike I ordered just looks more like a casual bicycle.

？ the battery has it own charge port, it doesn't need to go through any wire, if one charged faster,then it's older one

@@mynewtoys5468 I am talking about,, the throttle wires,, each battery goes to it's own controller, and the throttle wires. You have to cut 1 and then splice it to the other 1. So,, which battery takes longer to charge ? The 1 with the throttle wire that has been cut or the 1 spliced into wire ?

@anio6865 which battery take long charge? About the throttle wire? I can't answer this question, because they do not interfere with each other,

@@mynewtoys5468 sorry probably the way I explained it. Can tell does either 1 of the batteries take longer to charge ? Mine does to from 15 minutes to over an hour.

@anio6865 I think because one motor using more power then the other, also different age, (if the battery and charger still healthy)

You need a psu extension cable for sure, you need need change the aio depend what case you have, that pipe is short

My area costco still selling it, outside costco like Walmart Amazon are more expensive, just try Google search then shopping list

@@mynewtoys5468 Buy them refurbished directly from Jetson - $250.

I have 3 left(bolt pro"s). They are missing the throttles, seats, and batteries. if all you want is parts? I had eight. just fix one at a time and sell them or give them away.

a.aliexpress.com/_mq2ElyM

You can find many of parts from aliexpress

Thanks for link mate I'm looking now trying find two 12ich 1000watt moters for this build il take time fond roght parts iv got suspension seat pole wider handailbars wider seat fluid brakes grips stacking up on the parts bit by bit once I got all parts then is a gd 24 hours hard work full strip down and then build I'm gona keep for long gevety thas y wona get high ah battery and build a gd reliable bike will larst and take me the distance and nice 2 have power and speed there not that il need it but yh thanks agen will let you no wot parts I get thanks

That is my other 20 inch fat tire bike

kzbin.info/www/bejne/rXjZk2eGn9-Gd9E

But I don't know if the stock controller has pedal assistance,

I’m just looking to be able to peddle home if it dies

I have a second seat and my son is disabled so I have to push him and the bike when it dies

@Mathew187187 oh,I see, I upgraded dual motor and battery most reason is ride with my kids too

I think depends on what country, in my city, snow Bank always higher then the car, mine still not enough power shoot it on the top

yeah! and i found one of that bike with out any logo,this was the cheapest price one i found on aliexpress

I just did the same thing as Tony did, check on his video

For real?

That's what I did at the beginning, while waiting extra power cable and bag, same range, but drained the battery life very fast , I can feel it now with two battery that compared each other

@@mynewtoys5468 yep a battery for each motors and two throttles and two controller for each motor 48 volt set up and its alive it's alive its alive I tell you aaaaa ha ha ha ha ( sound like a mad scientist ) 😆

Haha, sounds good, I am planning upgrade my dual 36v battery to one 48v , hope it works good (finger cross)

@@mynewtoys5468 cool 😎 48 is faster

I'm buying 48v 30ah times 2 and need trigger throttle and few bits and bods

I brought a dual motor kugoo B2 V1 with dyu motor on front wheel with 16-15ah 52v battery with 30a BMS 2 25a control unit all running of one throttle and it does about 30 mph rapid it is