i need to go on a longboard trip, bad!

Only thing i would mention is be aware whatever products you folks plan to make that micro plastic is a serious threat in the environment as it is, products like road ways, walk ways. Etc. Wherethe plastic is subject to consistent abrasion, would cause the surrounding environment to be littered with micro plastic and ultimately and up washed into waterways, crops, roadways , into the soil.. You get the point. They say we already eat a credit card worth of plastic a week or some crazy shii like that..plastic is a huge problem! Let's think of uses that minimize shedding of micro particles! Personally i plan to use plastic to create 2x4, 2x6 and 2x12 "lumber" to build tiny homes. The thought being they are strong, light and when buried in walls wouldn't cause plastic contamination. God Speed y'all!

Can you drop the links to where you purchased the equipment? Tight work!

Too much yapping with no real solution

Thanks man..I snapped my board yesterday and I didn't think it could be fixed

GREAT !!!!

how much did this cost you?

Do you remove your chimney Cap when you drive? I would worry about it falling off in high speed

have the same issue the other day, GPU die was dry AF

what's this board/ brackets? looks really low! nice!

Was für Holzplatten benutzt du denn da? Birken Mulktiplex?

mine has to be mobo but its a pebuilt so i have to get psu and mobo

I have an idea i don't think it is possible but i will tell about making plastic papers and pens that can use in that type of paper.

Can i put this video in my new music video ? 🫡

hey bro, consider joining push for the cure ontario one year in ontario, canada. we skate from toronto to niagara end of sept every year to fundraise money for cancer research and awareness.

To avoid the rabbit hole next time try using event viewer in windows, it might have showed the Kernel-Power error under system logs.

Bro i build new pc but it shutdown 2.40 min for 6 to 7 time what i should do ?

what that insane video and only 26k views

i need a pantheon, my sector 9 drop through is great, but for long distance pushing its not feasible to use the heel because the crouch is so deep in order to the the heel....causing massive quad burns after a mile or so. The way i get around it is to lean forward more from the hip up and pivot my torso further with my hamstrings providing most of the tension and then push of the inner-side of the balls of my feet and relaxing my ankle to allow it to stretch out. But man i just did 2.85 miles in 12m 56s with 174ft of vertical climbing, 3 monster 50ft hills....i havent ridden that way in a long time and it was so invigorating. Most ive done in a day was 40+ miles back in high school with no water, no food lol, it was a skate limp to home for the last 5-6 miles lol

how can i find a matching cable to order

Thx but what about raining day can i still use long board

Didn't you just wire the left and right channels together? The red and white wires are for stereo.

Hallo!! Hab dein video gerade gesehen. 6.9.2024! Ich frag mich, ob du immer noch damit brschäftigt bist. Ich wohne in gambia ( west afrika Inside Senegal). Wir haben hier jede Menge plastik und ich bin interessiert in Recycling.

This was actually very useful because I'm starting out and I have a sore foot from only using my toes I think

Great video, very inspiring! How good you must be at downhill before you do a journey like this?

I have a question how did you decide the rpms of the screw

What was your average speed pushing the regular longboard on flat ground?

I don’t know if my pc turns off randomly cause I might have a malware or my pc is overheating and I really need help

kzbin.info/www/bejne/l5a2g2RpjbmAask

Hi, I love your videos! What was the reason you sold the 310?

what a piece of crap for the price, they need to use XLR plugs

Dude. You’re inspirational as hell. I need to do this. Like, HAVE TO. I don’t know why. I longboard, and have always wanted to skate somewhere…I know this takes dedication, buckets of sweat, and mental fortitude…Much love from Michigan, USA

Bricks

Cut the tubing mold to about 100mm long just to let the plastic take the shape and into a water bath as it extrudes

I have the same issue … and i have my pc next to me unplugged from this corrupted PSU waiting for my screwdriver kit to get it done

For those benches it would be better to heat the metal molds. This will help fill the mold out. Heat heat heat is what you need for more uniform and packing the mold.

what a stunning piece of art! totally in love with the camera movement and the cool transition ! dope work!

What shoes do you guys recommend for a long distance longboard trip? I am planning to longboard all the way to Santiago de Compostella, Spain, starting in the Netherlands.

Skateboarders have a bigger right side of an asss

Mine was caused by badly placed power cables after reseating it was working properly again.

Hello. I've come across your video when researching building an extrusion machine. Fantastic information and I love your passion. I have access to a fairly large recycling facility through a friend, after showing them my 3D printer and discussing waste PLA. They have offered me space in a workshop and access to any of their machines. They have a tool I can use for palletising failed prints so I want to build an extruder like yours as a proof of concept before approaching social media and asking for any and all failed prints to do a test run. I'm going to re watch your video and click the links for the parts but could you give me a rough overview on your costs to build this machine please? Have you encountered any issues? What would you do differently? Regarding moulds and product ideas; I've found my most regular request from friends and family are these mushroom shelves, they look like mushrooms on your wall with a flat surface for stuff on top. My friends have been painting them all sorts and sticking them all over the house. Secondly, Star Wars helmets, but I'm not sure how you would get around the copyright there - The texture of your recycled plastic compared to my 3d printed models would be much nicer too. Cheers! Hopefully speak to you soon

You can also use an extruder, especially if it is a twin-screw extruder, to produce a plastic masterbatch with a color of your choice. That's great if you wish to produce your very own filament, with its own specific color and properties. You can take PLA fibre - even one you made from scratch from sugars - and mix it in the extruder with pigments of your choice and other additives, usually a 50/50 ratio. It will eventually extrude out a thicker "rope" of material, which you can then have chopped into smaller pellets. Then, you can use pellets of a different color and mix it with those to get it even closer to a desired color if you wish, inside of a filament-extruder!

Great stuff!! Would you be open to sharing your experiences on two different style boards?

Great video man! I've been searching far and wide for people doing electric longboard/scooter/bike trips. I would definitely recommend pads though, they've saved me more than once!

Are these bars not more or less cast rather than extruded per see. Have you tried to actually extrude the bars through short beam molds where the formed beams actually cooled outside the extruder mold rather than inside the mold?

How much was that extruder screw? This turned into a very expensive project, wasn’t it?

Bro are you still on? I m about to follow your journey and go for a 1500 km too! Writing ur reply mate))

Wer braucht schon einen Zugang uebers Heck, weg damit.

Cool video! I noticed though that whilst stood on top of the van you’re right next to overhead power lines… don’t wanna be messing around close to them haha ⚡️

Going to different bus stops/greenbelts all over the USA would be DOPE