Ben Lomond, Tasmania
5:54
2 жыл бұрын
Kimberley Gold Prospecting (GPZ 7000)
17:04
Prado 90 1KZ-TE Engine Oil Change
11:11
Пікірлер
@ricardogaruz7574
@ricardogaruz7574 Күн бұрын
Good
@serge1060
@serge1060 6 күн бұрын
Hi, very informative video. I need to work on mine. What is the name of that part I need to replace? Thanks again.
@Alex_Smit
@Alex_Smit Ай бұрын
Hey man! are you able to link where to get the Detroit soft locker
@Alex_Smit
@Alex_Smit Ай бұрын
Do you have a diff locker?
@Rohanna13
@Rohanna13 2 ай бұрын
Josh and Ryno used to nail those 180 turns
@bushandbeachaustralia
@bushandbeachaustralia 2 ай бұрын
Yeh not much those fellas weren’t good at!
@FroggysGoldProspecting
@FroggysGoldProspecting 2 ай бұрын
That music
@bushandbeachaustralia
@bushandbeachaustralia 2 ай бұрын
Thanks for your contribution legend 🤙🏽
@mick3422
@mick3422 3 ай бұрын
Been a while
@kentaylor2950
@kentaylor2950 3 ай бұрын
I've been looking at one of these for a while now look great for small families would you still recommend one of these for smaller week long trips going into 2025?
@bushandbeachaustralia
@bushandbeachaustralia 3 ай бұрын
Definitely 👌🏽
@ishfaqalishah6647
@ishfaqalishah6647 3 ай бұрын
Is 15w40 recommended for 1kz ???
@jojotospot
@jojotospot 3 ай бұрын
Hi mate, i hope you are ok , i was wondering if i can install that MAP sensor with the oem ecu ? I own a 4runner 2001 with 1kzte engine kzn185 model
@bushandbeachaustralia
@bushandbeachaustralia 3 ай бұрын
Hi bud, I’m sure it’s been done but I can’t comment on the 4Runner personally as I haven’t owned one. Cheers
@polskieteksty
@polskieteksty 3 ай бұрын
Is it an automatic transmission right ?
@bushandbeachaustralia
@bushandbeachaustralia 3 ай бұрын
Manual gearbox mate
@lawnerddownunder3461
@lawnerddownunder3461 3 ай бұрын
Those retaining pins are the work of Satan.
@godmountain9886
@godmountain9886 3 ай бұрын
Where are the Stabilizer Sway Bar Links from????????
@phillipmartin6301
@phillipmartin6301 4 ай бұрын
Where do you purchase these brackets?...
@bushandbeachaustralia
@bushandbeachaustralia 4 ай бұрын
I purchased them from boss4wd.com.au
@99gpandy28
@99gpandy28 5 ай бұрын
Did you make the replacement part or is it available for sale
@bushandbeachaustralia
@bushandbeachaustralia 3 ай бұрын
It was available for sale at the time the video was made. I don’t make the part. Thanks
@Uk-tj
@Uk-tj 5 ай бұрын
Just bought a kdj95 fx, gonna check mine right after this 👌
@Uk-tj
@Uk-tj 5 ай бұрын
Needs a n/s/f lower 😁🍺
@matthew5660
@matthew5660 6 ай бұрын
Is the 90 series considered as a landcruiser?
@bushandbeachaustralia
@bushandbeachaustralia 6 ай бұрын
Yes, landcruiser badge on rear door 👍🏽
@bernardopriolo8383
@bernardopriolo8383 7 ай бұрын
It’s D4D engine?
@bushandbeachaustralia
@bushandbeachaustralia 7 ай бұрын
No it’s a 1kzte
@bernardopriolo8383
@bernardopriolo8383 7 ай бұрын
Great job. Thank you for sharing. Got my to do but auto 👍
@yachtwork
@yachtwork 7 ай бұрын
Ah, the jack. What a great idea. If you knew what I just did on the first side of my project you would be laughing. So tomorrow for the other side its the jack trick. Thanks for that.
@GreaseAndGravel
@GreaseAndGravel 8 ай бұрын
Great vids, man! I've got a 1997 Prado 3.4 V6. Sub'd!
@donaldlester1997
@donaldlester1997 10 ай бұрын
I would use a proper pry bar. Safety is no accident
@aggitravel
@aggitravel 10 ай бұрын
There great
@brendanmaguire9909
@brendanmaguire9909 10 ай бұрын
How did you fit the fan to the intercooler
@sogniluigi
@sogniluigi 11 ай бұрын
I'm looking to buy a 90 Prado ,I was checking the specs, and looks like that the 1kz have 120hp ,so why your car is only 113hp after tuning?
@shanelord5012
@shanelord5012 Жыл бұрын
Thanks for sharing this
@gurubuzzzz
@gurubuzzzz Жыл бұрын
Man, the music is so pumped!!! Can't wait to get into some GNARLY oil changes... Only joking, crap music and too loud. Give it up..... The music.
@magpie3966
@magpie3966 Жыл бұрын
I am German and i dont understand the most imortant point for me... At 7:29 he say that he got 5 inch lifted billstein struts and 40mm lifted springs. So is the car 50mm lifted or is the car 90mm lifted?
@henrydando
@henrydando Жыл бұрын
Thanks for the video. I was given a warning about my handbrake needed adjustment on my last WOF. Coundnt find anything in the manual i have so this was really helpful
@jamesbuckle6077
@jamesbuckle6077 Жыл бұрын
"Spins freely" lol. As freely as these do at least.
@glengrimm4075
@glengrimm4075 Жыл бұрын
BTW 555 ball joints are the same as Genuine. As long as they are marked 555. It's the companies logo. Toyota never made their own gear it was out sourced to 555.
@ashleygillett
@ashleygillett Жыл бұрын
Bro left a piece of paper tissue in the filter recess 🙈
@MrRobinski
@MrRobinski Жыл бұрын
can you make kids beds on the sides?
@kmyxmelbtv8334
@kmyxmelbtv8334 Жыл бұрын
Hi mate, please reply me thanks Im now currently with Cct stage 1 turbo Mapsensor same like you. Boost tee controller turbo smart Boost trothle controller plugNgo I thinking change to unichip Its work? Because im using cheap chip brand from oversea, im think this chip only support for mechanical diesel pump . Because no wire to diesel pump 2 wire to ecu..
@jayodon67
@jayodon67 Жыл бұрын
Thanks for the video. I've been searching for a while. I wasn't aware of the issues with the ball joint before I bought my Prado.
@Hikarishores
@Hikarishores Жыл бұрын
Great video mate, just wondering if the buckles would scratch your car?
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Thanks mate, the buckles had clearance to the door so they never touched. Cheers 🍻
@Hikarishores
@Hikarishores Жыл бұрын
@@bushandbeachaustralia Cheers mate, thank for the reply! 🍻
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
No worries 🤙🏽
@corihammond9999
@corihammond9999 Жыл бұрын
3 bar map sensor is a stupid idea . Put ur original back in as uv completely removed a whole lot of fuel u already had . U need to understand the circuit and its oe range it has to start with bs wjat the 3 bar will have .
@visualjon
@visualjon Жыл бұрын
Was this July/August or a bit later?
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Early June last year mate. Just got back up there today. Plenty of snow 👍🏽
@brandondavies6961
@brandondavies6961 Жыл бұрын
Awesome rig bro
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Thanks 🙏
@saltyoles
@saltyoles Жыл бұрын
Tidy rig mate, mint 4bee
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Legend cheers 🍻
@bradshaw5888
@bradshaw5888 Жыл бұрын
Hi mate, nice work with your 90👌 did you have a check light come up on first start up with 3 bar map? I fitted one to my 120 and it through an engine check light straight away. Do you have any insite?
@todd608
@todd608 Жыл бұрын
Did you find a fix?
@nathan5780
@nathan5780 Жыл бұрын
Have you ever put it up while it was raining? If so does it manage the water well ?
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
I haven’t put it up in heavy rain but we’ve been setup and experienced big downpours. The canvas did well and with the diesel heater going it stayed nice and dry with no condensation inside.
@jancarlospuello4173
@jancarlospuello4173 Жыл бұрын
Why 3 bar map sensor ? 2 bar sensor it is not enough?
@samster978
@samster978 Жыл бұрын
ever had issues with LBJ?
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
No I changed them out reasonably regularly and always carried a spare set on our travels. 👍🏽👌🏽
@trolzealot8635
@trolzealot8635 Жыл бұрын
Nice truck, I congratulate you, I wanted to ask you if you have eliminated the EGR and if you have done it, if it has given you any inconvenience, regards
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Thanks, the Australian 90 series 1kz don’t have an egr 👌🏽👍🏽
@jmginthent651
@jmginthent651 Жыл бұрын
Same for petrol ?
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Very similar, different oil required and slightly different oil capacity and Filter I’d imagine
@russellking9762
@russellking9762 Жыл бұрын
Supercheap used to sell the plastic funnels that actually screwed into the oil filler hole on the 1KZTE and other motors…now the only funnels they sell have an under sized skinny neck that has turned it into a two person job…one to hold the funnel and one to pour….what happened with those screw in funnels….just another (it wasn’t broke but we FIXED it anyway) of life’s ‘improvements’ to piss the consumer off!
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Bloody typical
@Billy-khalaf
@Billy-khalaf Жыл бұрын
i dont know how you tow with your prado especially offroading my sturggles and the back just gets slammed to the ground aha
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Haha we towed a lot so set everything up to handle the weight. Cheers mate
@Billy-khalaf
@Billy-khalaf Жыл бұрын
@@bushandbeachaustralia aha
@davidgorey3366
@davidgorey3366 Жыл бұрын
Can you do a vid on Intercooler fan mod
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
Hi I no longer run the intercooler fan mate. Cheers
@bennagel9137
@bennagel9137 Жыл бұрын
What do i search on ebay for the map sensor
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
www.ebay.com.au/itm/Universal-Fit-3-BAR-MAP-Sensor-to-For-Motec-Haltech-Adaptronic-Non-OEM-ECUs/192405663185?_mwBanner=1&mkcid=0&mkpid=0&emsid=0&ufes_redirect=true&ul_noapp=true&pageci=59f4547b-40bb-4d95-bc2a-755c746102e1
@PrspX
@PrspX Жыл бұрын
Could you leave a link of what ecu chip you used?
@bushandbeachaustralia
@bushandbeachaustralia Жыл бұрын
I don’t have one sorry. It’s a dp chip