Toyota Prado 90 Series Walk Around 2020

[@bushandbeachaustralia]

Ok so looks Like Allied Rims are back in action so these rims are available again 👌🏽🍻

[@mick3422]

Great work Shano, i have 90 series prado 3.4 and absolutely love it..have updated alot of stuff and put 2" lift kit after watching your vids mate. Next step is snorkel. Very reliable vehicle, keep the vids comin mate and 🍻

[@bushandbeachaustralia]

Thanks Mick! The 3.4l is pretty much bullet proof! As for videos I enjoy putting them together so stay tuned 👌🏽🍻🍻🍻

[@marcomac8824]

Great job, and interesting work through. Surprising how well your mighty 90 is running.

[@bushandbeachaustralia]

Thanks Marco 🤙🏽

[@alanbstard4]

mate of mine has a Prado 90 Never missed a beat. Great cars and the right size for those who don't need 100/200 series

[@bushandbeachaustralia]

Sure are Alan I believe they have a bigger payload then the 200 as well. Could be wrong but I heard that somewhere! Thanks for watching and commenting mate appreciate it 👌🏽🍻

[@MakingMoneyyy857]

Got a gxl prado 1kz, love the work you done. I do want to deflare mine as i prefer that look.

[@seanrichards8061]

Best 90 rig I’ve ever seen!

[@bushandbeachaustralia]

Legend thanks Sean!

[@craigk8353]

Top video mate love the run down of your 90 series give me some ideas for my 90.

[@bushandbeachaustralia]

Awesome thanks Craig stoked you liked it mate 👌🏽🍻

[@BrayanBrikauskey]

I have a 97 J95, 1KZ-TE AT, I do hope that someday I get to reach where you have with your rig. Awesome stuff bro!

[@bushandbeachaustralia]

Thanks 🙏🏽

[@WesternAustraliaNowAndThen]

The 90 is looking awesome.

[@bushandbeachaustralia]

Cheers bud . A lot of time and effort has gone into her! Thanks for watching and commenting 👌🏽🍻

[@robertbray8181]

Great work shano

[@bushandbeachaustralia]

Cheers big fella I’ll give you a call one day soon it’s been a while 🤙🏽

[@brandondavies6961]

Awesome rig bro

[@bushandbeachaustralia]

Thanks 🙏

[@gatvol2720]

This is my inspiration. Keep building my RV 2.7

[@bushandbeachaustralia]

Awesome to hear mate. I had a 2.7l before this 90. Great engine mate 🍻👌🏽

[@Alex_Smit]

Hey man! are you able to link where to get the Detroit soft locker

[@Jpehtetel90]

Awesome rig mate! Im considering a diff drop kit since I got a 2 inch suspension lift. Where can I get that 25mm diff drop kit?

[@bushandbeachaustralia]

Thanks mate try Glenn at rhythmoffroad.com/

[@FreedomInMindtv]

Love it mate 👍🏻

[@bushandbeachaustralia]

Thanks for watching and commenting Tom appreciate it mate. Hopefully you got an idea or two for your mighty 90 👌🏽🍻

[@muralidharamysore2549]

Awesome set-up. Thanks for sharing . BTW where did you get the hot water system from and what name please? ( Sorry, couldn't catch it from the video ). Thanks.

[@bushandbeachaustralia]

Thanks mate it’s a Glind Hot Water Shower. Link below glind.com.au/

[@muralidharamysore2549]

Thanks mate.

[@bushandbeachaustralia]

No problem 👌🏽🍻

[@trolzealot8635]

Nice truck, I congratulate you, I wanted to ask you if you have eliminated the EGR and if you have done it, if it has given you any inconvenience, regards

[@bushandbeachaustralia]

Thanks, the Australian 90 series 1kz don’t have an egr 👌🏽👍🏽

[@crusadershuakbar]

sweet. my kzj95 has the same stone chipped bonnet you mentioned, what was that "paint" you used to spray the bonnet with again and where can it be purchased, looks good

[@bushandbeachaustralia]

Hi mate it’s linex. Not sure if it’s available where you are or not. Raptor liner is similar but not as good

[@gaberklancar3845]

Hey mate, awsome rig u got there🤟, do u have some sketch or something measures write down for your rear steel bumper , could use them as i am making myself a rear steel bumper thanks for answer 😃

[@bushandbeachaustralia]

I don’t have a sketch mate. From memory I used 125x65x6mm rhs for the main bar. I folded up 3mm plate for the sides. I welded angle to the 125x65 to mount it up inside the chassis then drilled and bolted it with 2 bolts per side. I also welded some flat bar tabs towards the top of the rhs to mount onto some existing captive nuts. Hope this helps

[@gaberklancar3845]

Thanks alot mate😃👊

[@bushandbeachaustralia]

No problem 🍻

[@muzzapratt7784]

This is a sweet rig, would u have put a parts/cost list together?

[@bushandbeachaustralia]

Thanks, I’d have to be getting up around the 45-50k mark including all the maintenance and the initial purchase price of 24k. I’ve put around 230000kms on it over the 14 odd years I’ve owned it….

[@craigdemol8521]

Like what you have done i take my hat of to you but where did you get the handbrakes parts from and what was done thanks

[@bushandbeachaustralia]

I made a video on it a while back. The longer dog bones came from eBay. Here’s the link to the video kzbin.info/www/bejne/f4bcmWd-j9JlndU

[@bushandbeachaustralia]

This is the brand I used boss4wd.com.au/toyota-brake-struts

[@bennagel9137]

What do i search on ebay for the map sensor

[@bushandbeachaustralia]

www.ebay.com.au/itm/Universal-Fit-3-BAR-MAP-Sensor-to-For-Motec-Haltech-Adaptronic-Non-OEM-ECUs/192405663185?_mwBanner=1&mkcid=0&mkpid=0&emsid=0&ufes_redirect=true&ul_noapp=true&pageci=59f4547b-40bb-4d95-bc2a-755c746102e1

[@xdsawcon4677]

Great video mate, car looks great, do you by any chance know where you get the headlight globes from and could possibly give me a link as the headlights on my 90 do next to nothing at night

[@bushandbeachaustralia]

Hi mate they are the Philips Diamond Vision ultimate white light 5000k 55-60w

[@xdsawcon4677]

@@bushandbeachaustralia cheers mate, will definitely be looking into upgrading mine, do you have any footage of them at night you’d be able to upload so i can have a look at how well then work compared to the factory headlights

[@xdsawcon4677]

@@bushandbeachaustralia also do you know whether or not they’re road legal in aus

[@bushandbeachaustralia]

I don’t have any footage sorry bud. I’m pretty sure they are legal as they are the same wattage just whiter light. Best to contact Philips on that one to be sure

[@xdsawcon4677]

@@bushandbeachaustralia sweet as, cheers mate

[@matthewkenny2633]

Great set up. Where did you get the rear window insulation panels from? Cheers

[@bushandbeachaustralia]

I ordered them from Solarscreen bud 👌🏽🍻

[@matthewkenny2633]

cheers

[@bushandbeachaustralia]

No worries 👌🏽🍻

[@zinobud1]

Good looking Rig. I've got a 2002 GXL 3LT TURBO Auto 2inch lift Safari Snorkel ARB bar upfront rearwheel carrier at rear plus more. Have 390000 on her still going strong .

[@bushandbeachaustralia]

Good stuff bud they are a bloody reliable rig

[@jacobsmith1392]

Where can I get a bush and beach aus sticker mate???

[@bushandbeachaustralia]

Haha available nowhere 😂

[@bushandbeachaustralia]

Might get onto it one day see how the channel comes along....

[@Alex_Smit]

Do you have a diff locker?

[@magpie3966]

I am German and i dont understand the most imortant point for me... At 7:29 he say that he got 5 inch lifted billstein struts and 40mm lifted springs. So is the car 50mm lifted or is the car 90mm lifted?

[@tianleimu6501]

Hey mate, I have an exactly same model Prado in NZ with 280k on dash. I have to turn the key for around 5 seconds to cold start especially in winter. Already replaced battery and glow plugs and let the key in RUN position for 10 seconds before start. So do you know what's wrong with it? Thanks a lot

[@bushandbeachaustralia]

Not sure mate they do seem to dislike the cold though. You could try glowing a bit longer before starting. From what I’ve read on the forums the injector pumps usually start to go somewhere around the 300k mark

[@tianleimu6501]

Bush and Beach Australia The injector pump seems like a little bit leaking and hopefully is that. Thanks again

[@jasonphilpott5899]

Had this exact same problem! Accidentally fixed it when I installed two big fosgate amplifiers with 4gauge earth straps to the chassis...now it starts up before the glow light goes out!..so beef up those earth straps!! 🤙

[@emtee1927]

thanks mate. greetings from Fiji.

[@bushandbeachaustralia]

Thanks for watching mate! Do you surf in Fiji? Great waves over there I believe!

[@emtee1927]

@@bushandbeachaustralia great waves but I do not surf. you can come nd enjoy bro. off course when the this COVID thing is over

[@OaxyrWa8]

Do u have a video on diy instalation of the snorkel, left hand side? Do send me the link. Thanks

[@bushandbeachaustralia]

I don’t sorry bud

[@olympicfinefoodsbalcatta343]

Love it.

[@degansly5402]

How did u get the taillights 2 work as indicators

[@samster978]

ever had issues with LBJ?

[@bushandbeachaustralia]

No I changed them out reasonably regularly and always carried a spare set on our travels. 👍🏽👌🏽

[@FirstLightAdv]

Does the detroit autolocker rachet when turning (and if so how loud?)

[@bushandbeachaustralia]

No it doesn’t ratchet. Occasionally it makes a Loudish crack as it unlocks. This doesn’t happen often at all though. Would I recommend one? Yep 100 percent. No lines to rip out, it’s always on so you don’t have to think about engaging or disengaging it. Only slight downside is sometimes it’s hard to turn in soft sand

[@FirstLightAdv]

@@bushandbeachaustralia thanks, as I'm waiting anxiously for my lokka 👍

[@quirinusshylla1451]

Can you please upload the video of your car modification

[@matthew5660]

Is the 90 series considered as a landcruiser?

[@bushandbeachaustralia]

Yes, landcruiser badge on rear door 👍🏽

[@andreiluistro1463]

do you know if 33s fit on Prado 90 series with 2 inch lift ?

[@bushandbeachaustralia]

Most guys go for a 2 inch lift + 2 inch body lift to fit 33s. Also have to remove the front mud flaps and grind the seam back a little to stop them scrubbing. Cheers mate

[@anonymous-gf6hj]

@@bushandbeachaustralia is that legal in NSW ?

[@bushandbeachaustralia]

No idea mate

[@xaksh]

Looks Neat!

[@Desag777]

Support here very nice video

[@bushandbeachaustralia]

Thankyou 👊🏽

[@itsgojoverfr]

what is the fuel consumption?

[@bushandbeachaustralia]

12l per 100 kms. If towing it’s 15-17l per 100kms

[@itsgojoverfr]

@@bushandbeachaustralia that is relatively good compared to my 80 series land cruiser which does 16l per 100kms.

[@anguselmslie7783]

What brand are the rear drawers

[@bushandbeachaustralia]

Outback

[@quickster212]

nice rig! i have a 97 lc90 that am in the process of revitalizing. am looking for front fender liners which seem to be impossible to find in the philippines. any leads on where i can source them would ben appreciated. thanks!

[@bushandbeachaustralia]

Thanks mate! I remember seeing somewhere on one of the forums that Clark Rubber possibly sell them here in Australia. Hope that helps, good luck with the restoration 👌🏽🍻

[@anonymous-gf6hj]

How much did it cost to respray

[@bushandbeachaustralia]

5k

[@leefiz]

9:40 im more interest to yr MD ☺

[@bushandbeachaustralia]

Haha good ol Equinox 600!

[@leefiz]

@@bushandbeachaustralia That's great mate, I'm a detectorist from Malaysia, here we hv many colony from Portuguese, English, Netherlands, Japan, and some of our findings dated way back from 1700-1800ad coins silver and gold...

[@bushandbeachaustralia]

Wow awesome! I’m on my way to the goldfields now to try my luck for a few months

[@leefiz]

@@bushandbeachaustralia I used to stay in WA, Kalgoolie is also best for nuggets ....... Which part are you at mate?

[@bushandbeachaustralia]

We live in our camper trailer but Bunbury W.A. Is our home town. We are heading north of Kalgoorlie 👌🏽🍻