shooshinejonnie

Пікірлер

@JorgeVilla-l1i 23 сағат бұрын

How about the rear door shells are they the same or you had to do modifications.?

@JorgeVilla-l1i 23 сағат бұрын

How about the rear door shells are they the same or you had to do modifications.?

@shooshinejonnie 16 сағат бұрын

If I remember correctly, there were no modifications.

@rob_v_nj 13 күн бұрын

Mine was extremely loose. I tightened and then no start. I went under and pushed the cable back as far as I could go and it started. It was good after that. Thanks

@MsLori-BassGirl4Life 17 күн бұрын

But yours isnt lined up at all

@balboa7071 Ай бұрын

Hello do you have a video of the part where you install the connection from the truck to the screen?

@shooshinejonnie Ай бұрын

@@balboa7071 I do not. That install would go in with your head unit or auxiliary screen.

@fatkorn Ай бұрын

Soooooo you're telling me this is 100% safe for a 14 year old, understood, got it, heard loud an clear

@balboa7071 Ай бұрын

Do you have a video of all you electrical install?

@shooshinejonnie Ай бұрын

kzbin.info/www/bejne/e5LLZWZradhsmpYsi=M33aTYSozvazGzw5

@balboa7071 Ай бұрын

@ thank you for the tips!

@kenhorne4123 Ай бұрын

thinking of making one myself

@MrTimdtoolman1 Ай бұрын

I have been looking for the truck to trailer camera hookups like this for years, because I have been wanting to do this to my trailer. Thanks for the information.

@shooshinejonnie Ай бұрын

@@MrTimdtoolman1 I'm happy that it was useful for you.

@samuraicowboy9605 4 ай бұрын

Excellent build and organizational techniques applied. Three main things that caught my attention, 1 The lighting inside and outside, 2 Labelling of your drawer system as I do myself & 3 Division within your drawers you have internal divisions as well as I like to do. Thanks for sharing. Would very much like to see the videos of your other builds if you have them.

@shooshinejonnie 4 ай бұрын

@@samuraicowboy9605 thank you.

@michaelwebster8526 4 ай бұрын

Been thinking about doing this with a cheap walk behind mower, beats the hell out do spending 2k on a used dr all terrain mower

@truckerray7533 4 ай бұрын

how big is the engine & whats the horsepower???

@shooshinejonnie 4 ай бұрын

@@truckerray7533 I have no idea. Probably a 3 and 1/2 horsepower.

@truckerray7533 4 ай бұрын

@@shooshinejonnieCopy that, I was just curious! Sharpen up your blades!

@shooshinejonnie 4 ай бұрын

@@truckerray7533 it got tossed into the scrap pile after I was done.

@MichaelPolski-o4z 4 ай бұрын

question - I followed the wiring diagrams (2013 King Ranch seats in a 1999 Ford F250 diesel), but the horizontal forward backward wouldn't work - I got a new switch, didn't help. Did anyone else have this problem? (I thought it might be a bad "new" switch, and bought another - still no horizontal forward/reverse, even though it by directly hot wiring the motor. (?) Great video - best I found! It helped me not trip the airbag, and told me that green is hot and black is ground from original vehicle.

@bobbauer2287 5 ай бұрын

I just replaced the shifter rod and now my key cylinder won't turn all the way back to the off position. I lube the shifter cable because it wasn't going in park enough either. It now goes into park and starts but I wonder if I'm not fully into park? And that's what's not allowing my key cylinder to go all the way back? Any thoughts?

@shooshinejonnie 5 ай бұрын

It's been a minute since I've done this but if I remember correctly a tooth difference on the transmission adjustment can make a huge difference. I would start there. 🤷‍♂️

@bobbauer2287 5 ай бұрын

@@shooshinejonnie Thanks do you mean adjustment on what was shown on this video ?

@shooshinejonnie 5 ай бұрын

@@bobbauer2287 That is the one I was referring to. Have you already adjusted that? Outside of that, I'm not sure what to look for next.

@bobbauer2287 5 ай бұрын

@@shooshinejonnie ok yeah no I have not but I will give that a try and let you know. That's the neutral safety switch. Thanks Bob

@jeremiahmurray1622 5 ай бұрын

what type of plywood did you use?

@shooshinejonnie 5 ай бұрын

@@jeremiahmurray1622 AC plywood

@larryhewitt1078 5 ай бұрын

Just fixed my truck 1999 f250 super duty, about 2 weeks ago after parking my truck on a slight incline, It jumped out of Park and started to roll! Just yesterday it would not start i park, I Looked it up on your channel and fixed it! Thank You!

@shooshinejonnie 5 ай бұрын

@@larryhewitt1078 That's fantastic! I'm happy you were able to find your solution.

@larryhewitt1078 5 ай бұрын

I forgot to add, I put lock tight Blue on both screw threads

@robertm5969 5 ай бұрын

This is definitely worth a try. Clearing brush sucks. I would still take out the saplings with a $50 battery chainsaw or sawzall instead. Sharpening the blade beforehand also should make it go a lot faster and not stress the engine as much. Also could help to do it in the winter when a lot of the leaves are bare.

@bigshawn99t 6 ай бұрын

You, sir, are a genius

@shooshinejonnie 6 ай бұрын

@@bigshawn99t thank you

@bigshawn99t 6 ай бұрын

You, sir, are a genius

@Yourbosskid 6 ай бұрын

Ive been doing wheelies with a lawn mower through my field. This will be way better. Thanks man!

@wildwoodtop 6 ай бұрын

Good stuff son! 🤟6:07

@shooshinejonnie 6 ай бұрын

Thank you.

@tabeight5786 7 ай бұрын

Nice, thanks for the knowledge.

@kennethholland8228 7 ай бұрын

I just upgraded to a 7X 16 TOOL/CARGO TRAILER. TRYING TO GET SOME IDEAS ABOUT SHELVING LAYOUT. I LIKE THE WAY YOU HAVE YOUR TRAILER LAID OUT DO YOU HAVE ANY DIAGRAMS? WAS WONDERING HOW TO PUT POWER TO MY TRAILER ASWELL SO THANK YOU.

@shooshinejonnie 7 ай бұрын

Have you watched any of my other trailer videos? There will be a lot of information in there. Shoot me an email at [email protected] And we'll get connected there.

@danoakes4071 8 ай бұрын

I saw a guy who put a used worn out skill saw blade on a weed eater, but your idea looks like a safer option.

@shooshinejonnie 8 ай бұрын

If you could find a big enough saw blade you could do it on the mower as well. 💪 But then your saw blade would probably cost twice as much as the lawn mower itself. 🤷‍♂️

@danoakes4071 8 ай бұрын

@@shooshinejonnie I've got them all sizes to re-use in a pinch. I have to resharpen them to cut lumber, which is a pain; but they should go through a live sapling without much trouble. Once the carbide tip wears off, they are quickly dulled again. If I have time, I fetch the saplings out with a 12 ton come-along, then cut them up while they are still green to season for firewood. If they are too close to a rock wall or foundation, I cut them off as close to the ground as I can, then dap some stump killer on it. Riveting chain saw teeth on the old blades would work too.

@lumberjackdreamer6267 8 ай бұрын

Bright yellow means “airbag”. Bright orange means “high voltage EV”

@Kralphrn 8 ай бұрын

REally nice job!

@Kralphrn 8 ай бұрын

Love this!!!

@shooshinejonnie 8 ай бұрын

Thank you.

@salvadorw.empent2778 8 ай бұрын

That's a great idea, you could also cut a clearing out around the area that you want to eliminate and in the fall of the year set it on fire. Be careful leaving the shoots of the saplings because you could end up puncturing your truck or atv tire on them!

@GoldenOakCombatClub 8 ай бұрын

Just sent you an email. Would love your knowledge hooking up my 2012 door panels on my 2002 truck.

@benruiz39 8 ай бұрын

Great video!!!

@OutdoorTonez 9 ай бұрын

My truck is next looks fun but I like that work

@coolblue4077 9 ай бұрын

Looks like kit is 400 now

@shooshinejonnie 9 ай бұрын

It doesn't surprise me. I'm sure buying everything separately and building it yourself has also increased significantly.

@coolblue4077 9 ай бұрын

@@shooshinejonnie Where would you buy them all ready made from?

@shooshinejonnie 9 ай бұрын

@@coolblue4077 I have no idea. It isn't something I've needed in the last several years so I haven't looked.

@abdullahal-shimri3091 10 ай бұрын

Thx for the video. Thieves are know to drag trailers by their chains - no use blocking the coupler. Just keep a gps in the trailer.

@luislorenzijr.5991 10 ай бұрын

Thank you 🙏 so much for your help.

@shooshinejonnie 10 ай бұрын

I'm glad you found it helpful and I appreciate your feedback.

@willmurphy3790 10 ай бұрын

What is that console out of?? I’ve never seen a flow through style console in any 08-16 SD…I’ve seen the expedition ones swapped in which look good, but that one looks really good…

@shooshinejonnie 10 ай бұрын

2012 f250.

@phewiss3066 11 ай бұрын

hmm, camera guy needs some work great video anyways though 👍

@shooshinejonnie 10 ай бұрын

Thanks camera guy. 😁😉

@alexishuntington8131 11 ай бұрын

does this also relate to older fords? i have a 94 f150 that wont go into park

@shooshinejonnie 11 ай бұрын

That I don't know. You could always check. I'm thinking the neutral safety switch on the transmission should be a fairly common design. May not be exact.

@bill4123 11 ай бұрын

Perfect for an allthread moxon vice.

@bill4123 11 ай бұрын

I like using carriage washers or blind nuts when I don't have the right sized tap. Thanks for sharing your build, it's much appreciated!

@shooshinejonnie 11 ай бұрын

Thank you.

@MrJamminguitar 11 ай бұрын

Nice!

@shooshinejonnie 11 ай бұрын

Thank you for your kind words.

@TheSmartWoodshop 11 ай бұрын

How is the system holding up 5 years in?

@shooshinejonnie 11 ай бұрын

Still works great. It doesn't get pulled to the job very often anymore since I'm taking on a new role but when I need it it's ready to go. I would still do it all again and I recommend it to anybody. Especially my subcontractors.

@ericcullars8434 11 ай бұрын

You should've got the military battery post those aren't good

@drjoemcintyre Жыл бұрын

Anthony, I should have read your reply from one year ago and I definitely would agree with the lithium ion battery. What size lithium ion battery do you think would be sufficient. Thanks Joe.

@shooshinejonnie Жыл бұрын

I'm not sure what would be suitable. I've taken mine out and replaced it with attachments for two 18v Makita batteries. They drain quicker than I suspected and all they are pulling is the LED lights.

@drjoemcintyre Жыл бұрын

0:57 Anthony, would you do your electrical the same way today and if not what would you change? I am putting together a tool trailer for myself now. Thank you, Joe McIntyre.

@helmutkrauth4322 Жыл бұрын

Thank you! Not easy to get to but my 2000 E250 was missing one screw 😊 Works like a champ

@shooshinejonnie Жыл бұрын

Fantastic!

@Mike-xn1bh Жыл бұрын

@shooshinejonnie, did your 2012-2016 center console install level? I installed the same console in my ‘03 but it’s slanted downwards towards the driver side.

@shooshinejonnie Жыл бұрын

As far as I'm concerned it did, I don't see anything that seems off kilter or askew. 👀🔎📐 Did you use any of the under/center brackets or the front bracket? I did not use any of those. 🤷‍♂️

@Mike-xn1bh Жыл бұрын

@@shooshinejonnie just the rear brackets next to the seats. I noticed the factory console when placed on the ground also leans towards the driver’s side. Maybe the factory trans tunnel on the 2000-2007 is unveven from the factory and the 2012-2016 is not

@shooshinejonnie Жыл бұрын

I have a 2000. Should be the same. 🤷‍♂️

@anthonymaresca4839 Жыл бұрын

I’m going to try this. I have a 1999 f250. No start. I want to see if this fix.

@shooshinejonnie Жыл бұрын

It's a good place to start.

@midwestsignworks1289 Жыл бұрын

Thanks much -- good job !

@hasletjoe5984 Жыл бұрын

Fantastic video. Direct to the point and found my bolts loose under the dash! Was able to tighten them up and seems to be working fantastic! Used to have to be careful parking as truck tended to roll or go into reverse. Thank you very much!

@shooshinejonnie Жыл бұрын

Thank you. Happy that you were able to find it.

@BIGSTANK1983 Жыл бұрын

I just got a cheap used push mower and I really want to do this to it

@shooshinejonnie Жыл бұрын

You can definitely make it last longer if You have some welding skills and beef up the front end. These are all stamped and so when you cut some out it definitely weakens it.

Ең жақсы KZbin

Пікірлер