2 ай бұрын
5 ай бұрын
Пікірлер
@gaming8896 10 күн бұрын
Do you think the v3rnio throttle tmp is overkill? right now i have a plastic tpm and want the metal v3rnio but can't aget myself to pay $900+ for it.
@n8033fox 10 күн бұрын
Check this out! A buddy of mine is currently doing a review of it and claims it works quite well. I believe it is metal construction. www.desktoppilot.com/product/tpm-vernier-throttle-box/
@juanreyes2556 24 күн бұрын
Hello! mate, how are you? I would like to know what type of material you use to make that upper part of the panel, and the black material to cover it please!!
@AnthonyAdrianAcker 29 күн бұрын
How adorable. I hope you guys have a long and wonderful marriage full of lots of flying :) You are a freaking legend dude. How rad of you.
@n8033fox 27 күн бұрын
Thank you, and thanks for coming into the channel!
@TheSimDad Ай бұрын
Good morning from down under !!
@n8033fox Ай бұрын
G’day mate! Hope you’re doing well my friend!
@coma13794 2 ай бұрын
Congratulations! Can't say I've ever seen that before!
@n8033fox 2 ай бұрын
Thank you!
@TheSimDad 2 ай бұрын
Congratulations to you both. All the best....
@CardboardSim 2 ай бұрын
Congratulations 🎈🍾🎉
@Simbuilds-ud2kn 2 ай бұрын
Congratulations on your engagement!!!! 👏🎉
@CardboardSim 2 ай бұрын
Great Landing! Thanks for the shout out!
@n8033fox 2 ай бұрын
Any time!
@TheSimDad 2 ай бұрын
Love your work mate. Thanks for the shoutout and great to see.. Will give some of those others you did a crack I reckon !!.. Love that rear facing view (brilliant work !)
@CardboardSim 2 ай бұрын
Man you did an awesome job rebuilding your sim. It doesn’t get any better than this!
@n8033fox 2 ай бұрын
Thank you! There are still a few finishing touches which I’ll cover in the final part of the rebuild series now that I know the camera issues seem to be resolved. Thanks for your support!
@CardboardSim 2 ай бұрын
@@n8033fox you’re welcome!
@TheSimDad 2 ай бұрын
mate that view looking back behind the plane is sensational and will look bloody cool once you are piloting the aircraft. Nice work !!
@n8033fox 2 ай бұрын
Thanks! Until the rear seats get installed, I was looking for a good balance between the cockpit and 3D model and I think it worked out great! Thanks mate. Cheers!
@TheSimDad 2 ай бұрын
Very nicely done mate. Great work..
@gwdickson 2 ай бұрын
Yes, I watched your next video where you addressed my question. Thank you very much!
@gaming8896 2 ай бұрын
At least we aren't the pain in your arse.
@RandoCommando 2 ай бұрын
Need to fix the video. Any idea why it is doing that?
@n8033fox 2 ай бұрын
Yes, it’s horrible and you’re not the first to point it out. This is a recently new development it would seem and I’m attempting to debug it currently. I think it’s GoPro temperature related as it’s the only video device seeming to do that. I’m doing some testing as I type this…
@n8033fox 2 ай бұрын
GoPro recently released a new driver for their webcam software. I just installed it and did a two hour trial on Twitch. I’m happy to say that hopefully it worked as no one reported any flickering. I’ll be posting the results to KZbin in the next day or so…
@gaming8896 2 ай бұрын
Would like to see you do the panels on video too
@gaming8896 2 ай бұрын
Why do I keep missing your live stream ? Is it on KZbin or twitch
@n8033fox 2 ай бұрын
Hi. I’m sorry you keep missing the live streams. Currently, they all happen on Twitch and then I send them KZbin. I tried a live stream on KZbin recently and it seemed to work okay, so I’ll likely be streaming on both in the near future. Thanks for watching!
@Simbuilds-ud2kn 2 ай бұрын
Watched the whole video, thanks for sharing !
@CardboardSim 2 ай бұрын
Great build!
@robvalkyrie3160 2 ай бұрын
Looks like a professional pilot to me. WOW.
@gaming8896 2 ай бұрын
Enjoying your build videos. Do you like to build as much as fly ?
@n8033fox 2 ай бұрын
Thanks! I enjoy the build process because I like watching it all come together; but not as much as I enjoy flying. I do, however, enjoy sharing the process.
@TheSimDad 2 ай бұрын
Great work mate. Coming together really nicely.......love it.
@n8033fox 2 ай бұрын
Thank you! Cheers! Once it’s all finished, let’s hit some Idaho bush strips together on vatsim!
@Simbuilds-ud2kn 2 ай бұрын
enjoying your build videos. will be sad when your done.
@n8033fox 2 ай бұрын
@@Simbuilds-ud2kn …but as a sim builder, are we ever really done? I appreciate the kind words.
@RandoCommando 2 ай бұрын
I'm only at 30:52 in the video, so I don't know if you changed anything, but I think you could do without the shims, but a relief for the wheel, and use the faceplate cover that came with the wheel on the front, screwed through the wood pedestal, into the wheel behind the pedestal. This way you won't lose too much of the wheel to grip when adjusting trim.
@n8033fox 2 ай бұрын
That was a concern initially. I only lost about 1/8” by recessing it behind the pedestal. The original faceplate was a 1/8” and the pedestal is 1/4”. By removing the front, I gained 1/8” of wheel exposure but when putting it behind I lost 1/4”…so really just lost 1/8” which isn’t awful.
@RandoCommando 3 ай бұрын
Oh Michael! The left side is the right side, and the right side is the wrong side! LOL
@n8033fox 3 ай бұрын
Truer words are rarely spoken! 😂 It feels so wrong sitting there!
@sergey79 3 ай бұрын
Following along!
@RandoCommando 3 ай бұрын
Not finished watching the whole episode, but what about getting rid of the big monitor and using iPads or a smaller monitor and iPad? The iPads could sit lower and to the left and right of the yoke, thereby lowering your gauges. Air Manager works fine with iPads. Oh. And let me compliment you on the room you built in your garage. Looks great.
@n8033fox 3 ай бұрын
Thank you! The ipads are not a bad idea and I considered this, even arranging them in an upside down 'U' pattern to wrap around the yoke. I just didn't do any testing prior to see if Air Manager can run the iPads, along with run on the desktop PC. It would need run on the PC as well to handle the Arduino board which runs the round gauge adjustment knobs. I'll investigate this further once back up and running. Cheers!
@tabletopandroid 3 ай бұрын
I'm so used to seeing this view based on your home sim setup. So awesome to see you do some LIVE work as well.
@n8033fox 3 ай бұрын
I need to get back up in the air. Weather has not been cooperating.
@user-lf3rr2nm2s 3 ай бұрын
🎉
@TheSimDad 3 ай бұрын
sorry missed this buddy. Good to see a new sim build coming together and looking forward to seeing her take shape. I am running a series of livestreams over the coming weeks where I will deep dive into my sim with Fusion360. Feel free to check it out..........
@RandoCommando 3 ай бұрын
Nice work. The room looks good.
@ifirekirby7498 4 ай бұрын
Happy to see a new video, they’re really fun to watch!
@n8033fox 3 ай бұрын
Hi! Sorry it took a while to get a new one up. I’ve been busy building a new hangar for Felicity! A new video with details coming on that shortly.
@bushoutfitters 7 ай бұрын
Amazing!
@n8033fox 7 ай бұрын
Thank you! Cheers!
@bonk2361 7 ай бұрын
thanks for your scenery! i trained a bit. it seems to be very hard in xplane, even with a stol, like the maule. mostly because of the low braking authority. i have the feeling that ground friction is still pretty off in xplane in general. skidding and sliding as skating on ice sometimes...
@bonk2361 7 ай бұрын
I really appreciate your setup and fitting videos. Also watched the other. I'm currently struggling with my 3 screen setup and immersive lcd pro. Hope to get it sorted out. However, keep up the nice videos, also enjoyed your ArkanSTOL series in this beauty.
@n8033fox 7 ай бұрын
Hi and thanks. I had actually planned on doing a video tutorial on how I set my displays up using ImmersiveLCD Pro. I might have to accelerate that plan...
@stephenhayes8168 8 ай бұрын
Love that motto, "How fast can you go slow" ... great job on the scenery pack!! Whether I compete or not is another matter, but I will absolutely enjoy practicing! Great way to improve and hone your skills!
@user-xm9oo1qm1g 8 ай бұрын
I was the person who named Fish Lake. Winner of an international competition to name this remote body of water, my submission prevailed over all others to garner top prize. I was asked by news reporters afterwards what inspired the name? "Well, it was a lake and I assumed there were fish in it, since fish seem to like water. Therefore, I came up with the name Fish Lake." There you have it.
@njbpaul 9 ай бұрын
Nice work. You are ready to get your PPL . Thanks for posting
@n8033fox 9 ай бұрын
I have it. Currently PPL ASEL. I passed my check ride on the 14th of July!
@njbpaul 9 ай бұрын
@@n8033fox oh wow. I was a bit late . You worked very hard for it . Congratulations 👏
@RandoCommando 9 ай бұрын
Nice landing!
@n8033fox 9 ай бұрын
Thank you!
@Westjet1450 9 ай бұрын
That airport looks like alot of fun it, very scenic.
@mstyne 9 ай бұрын
Great job!
@Skyblueradio 9 ай бұрын
Sweet!!!
@FlyAlphaFoxtrot 10 ай бұрын
Good luck! Looks like you're all set! Great job with the high crosswind.
@n8033fox 10 ай бұрын
Thank you!
@Westjet1450 10 ай бұрын
There were a lot of nice landings in that video
@n8033fox 10 ай бұрын
Thanks! It was a lil windy but managed alright!
@Westjet1450 10 ай бұрын
Awesome Video! And Good luck on your check ride.
@Westjet1450 10 ай бұрын
Very Nice!
@_pocketsand 10 ай бұрын
great video!
@n8033fox 10 ай бұрын
Thank you!
@Westjet1450 10 ай бұрын
Awesome video, as always.
@n8033fox 10 ай бұрын
Thank you!
@navigatorjack6969 11 ай бұрын
Nice set up
@n8033fox 11 ай бұрын
Thanks. Your rig is pretty nice as well!
@Westjet1450 Жыл бұрын
Cool