I’m so glad I found your video. I really was confused. You talked me through it. Thank goodness
@jayjones44195 күн бұрын
Thank you you did great😊
@tarheelengraving4 күн бұрын
Thank you! 😊
@knkincabotkent94867 күн бұрын
I updated to the latest XCS version and now I can't get the corner radius to work. Have you tried it?
@tarheelengraving4 күн бұрын
I have not, most of the time when I can't find something, I look at some of the user comments on xTool Help Pages on Google.
@jf672016 күн бұрын
THANK YOU!
@TheresaHill-o3p16 күн бұрын
I really enjoyed the tutorial. The new creative space version has changed significantly which I think is a big improvement. I'm having a problem you didn't cover. You showed how to do layers but not the ordering or processing. I can set the order of layers I want processed but for the life of me I can't find where the "by layer" option is for processing. It use to be on the right hand side in the parmeters window but not anymore. Any help would be appreciated.
@tarheelengraving15 күн бұрын
See if this article helps: support.xtool.com/article/880
@JonahBill-u5l16 күн бұрын
Nyah Well
@JulianElsie-u4e17 күн бұрын
Moore Creek
@JanelleWilliams-i2d17 күн бұрын
Taylor Barbara Lewis Patricia Gonzalez Jose
@MattC4267818 күн бұрын
Thanks, my S1 40W shows up today. I have been trying to find a very simple instruction on how to get started in XCS for a few days, being I am a complete novice. Your instruction is the easiest I have found, so thank you. Also, hello from Eastern NC(Swansboro).
@tarheelengraving17 күн бұрын
That’s awesome to hear! It’s a great side hustle or hobby! And it’s good to see someone else from NC on my channel!
@ken181718 күн бұрын
I learned a few new things, thank you.
@tarheelengraving18 күн бұрын
Glad it was helpful!
@III.Natividad20 күн бұрын
9512 Lind Mount
@AnIrishExport20 күн бұрын
How do I get the Undo, Group, Outline, Align etc options to show along the top of the XCS window like you have? My XCS doesnt display any of those along the top of the window, Just some options down the left side of the window
@tarheelengraving17 күн бұрын
This video shows an older version of XCS. I just posted a new one of XCS 2.0, that may be beneficial.
@edmelzark106925 күн бұрын
Does it normally over shoot the project size on project? I am doing a tumbler
@tarheelengraving24 күн бұрын
Make sure you have your chuck roller selected, your rotary tool is plugged in, and you are in inches instead of mm (if you are from the US) Then it’s best to frame it a few times before you start your engraving.
@BurtBacon-b7o26 күн бұрын
Gonzalez Patricia Thomas Frank Anderson Shirley
@lizethmayorga763526 күн бұрын
I just purchased a Xtool P2. I downloaded the software but the horizontal toolbar doesn’t show on top. Does anyone know how I can fix this?
@tarheelengraving24 күн бұрын
There may be a carrot key, three lines, or down arrow on the top of the screen that open and closes the task bar.
@ken181728 күн бұрын
Thank you, as a newbie I own a 5 watt d1pro 2.0 i should have be purchased the 10 watt
@tarheelengraving27 күн бұрын
Yea, the good thing about the D1 is that you can buy a stronger laser module box without having to replace the whole engraver. Which helps save money!
@seppolehti629428 күн бұрын
I have been thinking to buy new power machine maybe not anymore because I have now D1 pro 20w and it is working well
@tarheelengraving28 күн бұрын
The D1 20w is a great machine! The S1 or M1 are great upgrade options if you have the area and money for it!
@amymeya129 күн бұрын
I only have an Ipad, what type of computer would I need for an xtool, and your video is really great!!
@tarheelengraving28 күн бұрын
I have seen people use xTool creative space on tablets before, so you could possibly use the Bluetooth on your tablet, but I never have. Just about any computer would work. I use a Dell laptop.
@KitWoodrow-o6cАй бұрын
Lewis Donald Clark Christopher Taylor Donald
@WyldeZeroАй бұрын
88120 Leann Green
@JeremiahLeif-v5iАй бұрын
White Matthew Young Ronald Walker Timothy
@FernandoMelchior-h1fАй бұрын
510 Luisa Plaza
@jharper74Ай бұрын
Great tutorial. Thank you.
@tarheelengravingАй бұрын
Glad it was helpful!
@ElizabethTaylor-o1xАй бұрын
Gonzalez Daniel Robinson Paul Young Gary
@rhondarichard33332 ай бұрын
Best tutorial I’ve seen since purchasing my xTool machine. Thanks!!!
@tarheelengraving2 ай бұрын
Wow, thanks!
@Starbuck72802 ай бұрын
Thank you I’ve been trying to learn this forever.
@tarheelengraving2 ай бұрын
Glad I could help!
@tracyjohnson55312 ай бұрын
By far one of the easiest to follow videos. You just saved my sanity!!! @tar heel engraving
@tarheelengraving2 ай бұрын
Thank you!!!
@sefaspeetahsambou91152 ай бұрын
Bro i have watched all your videos and i like them all keep it up, only one thing left that is the honeycomb and would like you to build it... Then will have more cleaner cutting... Guidance...
@tarheelengraving2 ай бұрын
That is on my list to get soon!
@cheito732 ай бұрын
This didn’t help my situation in framing. I’m looking for a start point on the actual machine. Where should I place my fabric to cut? Center of the honeycomb grid? Upper left hand corner?? Where? I keep getting an error message. Stating I went far beyond my framing.
@MS-cd8vb2 ай бұрын
You did an amazing job on this!! You are nice and slow on your descriptions, and I absolutely love the Southern Drawl!😊
@tarheelengraving2 ай бұрын
Thanks 😂
@keithorlando66523 ай бұрын
Can you do a video on how to invert an image?
@DaveRadtke-x2u3 ай бұрын
My screen is not like this. Must be before software update.
@tarheelengraving2 ай бұрын
There was a Creative Space update.
@allworld65803 ай бұрын
Just got my D1 Pro 20W, but when I put the material that came with the machine (piece of basswood approximately 8.25” by 6”) under the laser to be framed, the laser moves all over and way bigger than the wood and hits the edge and sets off the limit alarm…please help
@tarheelengraving3 ай бұрын
Here are a couple of tips: - Make sure that the settings are in inches - Ensure your belts are tightened - Make sure that your engraver is updated to the newest update
@commonsensepatriot94504 ай бұрын
I'm trying to use the app from an android phone. When I click on text, I get Hello, but I can't change the text. Can you help?
@tarheelengraving3 ай бұрын
Usually there is a text box on the computer to type in. I am unsure on a mobile device because I have never tried it on one.
@kyledraven84134 ай бұрын
this video is no good now as the site address you give only take you to the F1 download site
@paulpelosi33794 ай бұрын
One of the best tutorials I have seen, nice job!
@tarheelengraving4 ай бұрын
Glad it was helpful!
@noahsark52794 ай бұрын
Thanks for the video. Love the cadence of your narrative. Nice and slow and concise. I can actually follow what you are showing. Go figure!
@tarheelengraving4 ай бұрын
Glad you enjoyed it!
@simoneprandini89385 ай бұрын
Is it possible to process multiple elements as a single one without using the unite command? Grouping still processes each element individually. For example, an svg text to be engraved, if united will be processed all together but if not, it will be engraved letter by letter which is a lot slower.
@deblincourt68025 ай бұрын
My xtool creative space is not working. Do you have any suggestions
@KimBailey-ih3mu5 ай бұрын
My screen doesn’t look like that. No top bar. Left bar no words.
@glendamccrary81765 ай бұрын
Mine doesn’t either. How can we fix this??
@yeyongfeng5 ай бұрын
Maybe you need to download the old version
@tammymiller75972 ай бұрын
New version doesn’t have top bar option why?
@TexasGiftmaster5 ай бұрын
Thanks for this. Trying to understand why my creative space screen doesnt look like yours. I dont have all the tools across the top etc.
@tarheelengraving5 ай бұрын
There must have been a new update. Mine still looks like it does in the video, but I have received comments that theirs looks different.
@AndyHooper-es3js5 ай бұрын
MY SOFTWARE LOOKS TOTALLY DIFFERENT, NOTHING LIKE THIS, I JUST DOWNLOADED IT YESTERDAY.
@marcelinalaracanelo62315 ай бұрын
i am having the same issue, cant seem to find a video of how to change it
@tarheelengraving5 ай бұрын
There must have been a new update. Mine still looks like it does in the video, but I have received comments that theirs looks different.
@dipeshbarahi65496 ай бұрын
Thank you for this video. I need help because I dont know how to stop xtool from ungrouping my imported svg (image) automatically. Is there a way to stop it from happening. I like to get my files ready in Illustrator and import my svg to xtool but as soon as I import it, it ungroups every little tiny text and its really time consuming and hard to regroup them and re arrange them. Can you make a video explaining the different layer & color options. Thanks desperate i am :)
@yasminaf36996 ай бұрын
Thanks! My creative space looks totally different, and many options are not there. I use M1 on windows laptop. Is any support on that
@tarheelengraving6 ай бұрын
Creative Space has had a few updates since this video was posted. However, the basic layout is the same. I also use windows, so I am unsure.
@filter506 ай бұрын
On my S1 I can put my cursor in the framing speed box and typing in speeds less then 80.
@tarheelengraving6 ай бұрын
I use the Xtool D1 Pro, but all speed/power capabilities on all lasers are different.
@johnpell68676 ай бұрын
I need help for marking smaller objects. Especially smaller round objects like the wooden key rings they send you. The xtool wants me to mark the the key ring in 3 different spots.
@kayleneal_BSS6 ай бұрын
One of thee best tutorials out there. Straight to the point and no guessing. Thanks
@tarheelengraving6 ай бұрын
Thank you!
@rodneyfitzgerald38056 ай бұрын
When i frame. My laser just goes up and down. It NEVER moves in a square (frame)
@tarheelengraving6 ай бұрын
That happened to me one time and it was because the belt was not tight enough and it caused the rollers to slip. Try tightening the black belt on the horizontal part of your laser that the engraver module is attached to. That may help.
@MercedesRosa-c8e6 ай бұрын
Hi there I have a S1 and I like to know how to fill out an image inside the rectangle? Thank you
@tarheelengraving6 ай бұрын
If you add a shape (rectangle), under "Process Type" select "Engrave". It should fill in the shape.
@ellefrederiksen20243 ай бұрын
None of these tools come up for me the same way. For example text. I click text,text box appears, zero tools to alter the text follow.